[2022年03月]更新のVMware 2V0-41.20問題集厳選された問題集でパスして、最短時間を目指そう [Q36-Q56]

[2022年03月]更新のVMware 2V0-41.20問題集厳選された問題集でパスして、最短時間を目指そう

VMware 2V0-41.20試験問題集で[2022年最新] 練習高合格率な試験問題集問題

質問 36
Which tool could be used to configure BGP on a Tier-0 Gateway?

A. NSX CLI
B. PowerShell
C. API
D. ESX CLI

正解: A

質問 37
Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?

A. vm-support
B. get support-bundle file vcpnv.tgz
C. esxcli system syslog config logger set --id=nsxmanager
D. set support-bundle file vcpnv.tgz

正解: B

質問 38
When deploying east-west network introspection, which Service Virtual Machine (SVM) deployment method achieves the least amount of traffic hairpinning?

A. Place a partner SVM on each compute cluster node.
B. Centralize partner SVMs in a service cluster.
C. Add partner SVMs to an edge cluster.
D. Create a secondary vNIC on each quest VM for SVM communication.

正解: D

質問 39
What are two valid options when configuring the scope of a distributed firewall rule? (Choose two.)

A. DFW
B. Segment
C. Group
D. Tier-1 Gateway
E. Segment Port

正解: A,C

質問 40
A DevOps user has deployed a Kubernetes Pod in vSphere.
What does the term ClusterIP represent within NSX-T?

A. Deployment of T0 and T1
B. Deployment of Distributed Router.
C. Deployment of Distributed Load Balancing service.
D. Deployment of T1 with NLB service.

正解: C

質問 41
Which two statements describe the characteristics of an Edge Cluster in NSX-T 3.0 Data Center? (Choose two.)

A. can have a maximum of 8 edge nodes
B. can have a maximum of 10 edge nodes
C. must have only active-active edge nodes
D. must contain only one type of edge nodes (VM or bare metal)
E. can contain multiple types of edge nodes (VM or bare metal)

正解: B,E

解説:
Explanation

質問 42
Which CLI command is used to start the NSX Manager virtual machine in the KVM environment?

A. virsh poweron <nsx-manager-name>
B. virsh poweron <nsx-manager-ID>
C. virsh start <NSX-Manager-Name>
D. virsh start <NSX-Manager-ID>

正解: C

解説:
Explanation/Reference:

質問 43
In a NSX-T Data Center environment, an administrator is observing low throughput and congestion between the Tier-0 Gateway and the upstream physical routers.
Which two actions could address low throughput and congestion? (Choose two.)

A. Configure NAT on the Tier-0 gateway.
B. Deploy Large size Edge node/s.
C. Configure a Tier-1 gateway and connect it directly to the physical routers.
D. Add an additional vNIC to the NSX Edge node.
E. Configure ECMP on the Tier-0 gateway.

正解: B,E

質問 44
An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.
Which message ID (msgid) should be used in the syslog export configuration command as a filter?

A. SYSTEM
B. GROUPING
C. FABRIC
D. MONITORING

正解: C

解説:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf

質問 45
Which statement is true about an alarm in a Suppressed state?

A. An alarm can be suppressed for a specific duration in days.
B. An alarm can be suppressed for a specific duration in minutes.
C. An alarm can be suppressed for a specific duration in hours.
D. An alarm can be suppressed for a specific duration in seconds.

正解: C

解説:
Reference:
https://docs.vmware.com/en/VMware-NSX-Intelligence/1.1/user-guide/GUID-EBD3C5A8-F9AB-4A22-BA40-92D61850C1E6.html
"If you move an alarm into a Suppressed state, you are prompted to specify the duration in hours. After the specified duration passes, the alarm state reverts to Open. However, if the system determines the condition has been corrected, the alarm state changes to Resolved." https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-EB1BB1D3-8892-4890-BE74-EF43CFC75F19.html

質問 46
Which two commands are used to query the arp-table of a logical switch? (Choose two.)

A. get logical-switch arp-table <logical-switch-uuid>
B. get logical-switch <vni> arp-table
C. get logical-switch arp-table
D. get logical-switch arp-table <vni>
E. get logical-switch <logical-switch-uuid> arp-table

正解: B,E

質問 47
What are two types of supported IPSec VPNs in NSX-T Data Center? (Choose two.)

A. Open source based IPSec VPN
B. policy-based IPSec VPN
C. Layer-7 based IPSec VPN
D. SSL based IPSec VPN
E. route-based IPSec VPN

正解: B,E

質問 48
A customer has a network where BGP has been enabled and the BGP neighbor is configured on the Tier-0 Gateway. A NSX-T Data Center administrator used the get logical-routers command to retrieve this information:

Which two commands must be executed to check BGP neighbor status? (Choose two.)

A. sa-nsxedge-01(tier0_sr)> get bgp neighbor
B. vrf 4
C. sa-nsxedge-01(tier0_dr)> get bgp neighbor
D. vrf 1
E. vrf 3
F. sa-nsxedge-01(tier1_sr)> get bgp neighbor

正解: A,E

質問 49
An NSX administrator has configured a KVM hypervisor as a transport node.
Which kernel module on KVM implements a N-VDS?

A. openvswitch
B. etherswitch
C. dvswitch
D. nsx-vswitch

正解: A

質問 50
What needs to be configured on a Tier-0 Gateway to make NSX Edge Services available to a VM on a VLAN- backed logical switch?

A. Downlink interface
B. Service interface
C. Loopback Router Port
D. VLAN Uplink

正解: B

質問 51
Which two commands does an NSX administrator use to check the IP address of the VMkernel port for the GENEVE protocol on the ESXi transport node? (Choose two.)

A. esxcli network ip interface ipv4 get
B. esxcfg-nics -1
C. net-dvs
D. esxcli network nic list
E. esxcfg-vmknic -1

正解: A,E

質問 52
Which tool injects packets and provides various observation points along the packet's path between two NSX-T managed objects?

A. SPAN mirrors
B. Traceflow
C. Port Mirroring
D. IPFIX
Reference: https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=7&ved=2ahUKEwjw0duct_nmAhUJ1BoKHVrgACcQFjAGegQIBxAC&url=ftp%3A%2F%2Fftp.inwinstack.com%2FOther%2FAI-NSX-T%2FVMware% 2FVMWare%2520NSX-T%2FDocuments% 2Fnsxt_21_admin.pdf&usg=AOvVaw2DqQfqPkhzWQfiJP2SgNbO (213) Reference: https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=7&ved=2ahUKEwjw0duct_nmAhUJ1BoKHVrgACcQFjAGegQIBxAC&url=ftp%3A%2F%2Fftp.inwinstack.com%2FOther%2FAI-NSX-T%2FVMware% 2FVMWare%2520NSX-T%2FDocuments% 2Fnsxt_21_admin.pdf&usg=AOvVaw2DqQfqPkhzWQfiJP2SgNbO (213)

正解: B

質問 53
Which three services are compatible with VRF Lite? (Choose three.)

A. Intrusion Detection
B. NAT
C. DHCP
D. Load Balancer
E. VPN

正解: A,B,C

解説:
Explanation
VRF Lite is not compatible with the following services:
-VPN
-Load Balancer
Taken from NSX-T ICM 3.0 Lecture Manual.

質問 54
When running nsxcli on an ESXi host, which command will show the Replication mode?

A. get logical-switch <Local-Switch-UUID> status
B. get logical-switches
C. get logical-switch status
D. get logical-switch <Logical-Switch-UUID>

正解: D

質問 55
Which two BGP configuration parameters can be configured in the VRF Lite gateways? (Choose two.)

A. Graceful Restart
B. Route Distribution
C. Local AS
The following parameters are inherited from the default Tier-0 gateway and cannot be modified at the VRF level:
* Local AS
* Graceful restart
* Graceful restart timer
* Graceful restart stale timer
* Multipath relax
Inter-SR iBGP is not supported in VRF gateways.
BGP can be enabled or disabled per VRF gateway.
Route aggregation and BGP neighbors are local configurations per VRF.
D. Route Aggregation
E. BGP Neighbors