[2023年11月26日]200-301問題集完全版問題、試験学習ガイド
CCNA無料認定試験材料Fast2testからの898問題
シスコ200-301試験は、ネットワークのキャリアを追求したい人や既存のネットワークスキルを向上させたい人に最適です。この試験は、ネットワーク管理者、ネットワークエンジニア、ネットワーク技術者、そしてコンピューターネットワークの管理と維持に責任を持つすべての人に適しています。
質問 # 117
Which configuration can be used with PAT to allow multiple inside address to be translated to a single outside address?
- A. DNS
- B. Dynamic Routing
- C. overload
- D. Preempt
正解：C
質問 # 118
Refer to the exhibit.
Which configuration allows routers R14 and R86 to form an OSPFv2 adjacency while acting as a central point for exchanging OSPF information between routers?
- A.
- B.
- C.
- D.
正解：B
質問 # 119
Refer to the exhibit.
A network engineer must block access for all computers on VLAN 20 to the web server via HTTP All other computers must be able to access the web server Which configuration when applied to switch A accomplishes this task?
- A. Option A
- B. Option B
- C. Option C
- D. Option D
正解：B
質問 # 120
Drag and drop the DHCP snooping terms from the left onto the descriptions on the right.
正解：
解説：
質問 # 121
An email user has been lured into clicking a link in an email sent by their company's security organization. The webpage that opens reports that it was safe but the link could have contained malicious code. Which type of security program is in place?
- A. brute force attack
- B. Physical access control
- C. Social engineering attack
- D. user awareness
正解：D
解説：
This is a training program which simulates an attack, not a real attack (as it says "The webpage that opens reports that it was safe") so we believed it should be called a "user awareness" program. Therefore the best answer here should be "user awareness". This is the definition of "User awareness" from CCNA 200- 301 Offical Cert Guide Book: "User awareness: All users should be made aware of the need for data confidentiality to protect corporate information, as well as their own credentials and personal information. They should also be made aware of potential threats, schemes to mislead, and proper procedures to report security incidents. " Note: Physical access control means infrastructure locations, such as network closets and data centers, should remain securely locked.
質問 # 122
After you deploy a new WLAN controller on your network, which two additional tasks should you consider? (choose two)
- A. configure additional vlans
- B. deploy POE switches
- C. configure additional security policies
- D. deploy load balancers
- E. configure multiple VRRP groups
正解：C、D
質問 # 123
Refer to the exhibit.
After the election process what is the root bridge in the HQ LAN?
- A. Switch 3
- B. Switch 2
- C. Switch 1
- D. Switch 4
正解：D
質問 # 124
Refer to the exhibit.
What commands are needed to add a subinterface to Ethernet0/0 on R1 to allow for VLAN 20, with IP address
10.20.20.1/24?
- A. R1(config)#interface ethernet0/0.20
R1(config)#ip address 10.20.20.1 255.255.255.0 - B. R1(config)#interface ethernet0/0
R1(config)#ip address 10.20.20.1 255.255.255.0 - C. R1(config)#interface ethernet0/0
R1(config)#encapsulation dot1q 20
R1(config)#ip address 10.20.20.1 255.255.255.0 - D. R1(config)#interface ethernet0/0.20
R1(config)#encapsulation dot1q 20
R1(config)#ip address 10.20.20.1 255.255.255.0
正解：D
質問 # 125
Refer to Exhibit.
Which action do the switches take on the trunk link?
- A. The trunk forms but the mismatched native VLANs are merged into a single broadcast domain.
- B. The trunk forms but VLAN 99 and VLAN 999 are in a shutdown state.
- C. The trunk does not form and the ports go into an err-disabled status.
- D. The trunk does not form, but VLAN 99 and VLAN 999 are allowed to traverse the link.
正解：A
解説：
Explanation
The trunk still forms with mismatched native VLANs and the traffic can actually flow between mismatched switches. But it is absolutely necessary that the native VLANs on both ends of a trunk link match; otherwise a native VLAN mismatch occurs, causing the two VLANs to effectively merge.
For example with the above configuration, SW1 would send untagged frames for VLAN 999. SW2 receives them but would think they are for VLAN 99 so we can say these two VLANs are merged.
質問 # 126
Drag and Drop Question
Drag and drop the application protocols from the left onto the transport protocols that is uses on the right.
Select and Place:
正解：
解説：
質問 # 127
Drag and Drop Question
Drag and drop the functions from the left onto the correct network components on the right.
Select and Place:
正解：
解説：
質問 # 128
Refer to the exhibit. Which command would you use to configure a static route on Router1 to network
192.168.202.0/24 with a nondefault administrative distance?
- A. router1(config)#ip route 1 192.168.201.1 255.255.255.0 192.168.201.2
- B. router1(config)#ip route 192.168.202.0 255.255.255.0 192.168.201.2 1
- C. router1(config)#ip route 192.168.202.0 255.255.255.0 192.168.201.2 5
- D. router1(config)#ip route 5 192.168.202.0 255.255.255.0 192.168.201.2
正解：C
解説：
Section: IP Connectivity
Explanation:
The default AD of static route is 1 so we need to configure another number for the static route.
質問 # 129
Drag and drop the SNMP manager and agent identifier commands from the left onto the functions on the right
正解：
解説：
質問 # 130
Refer to the exhibit. Router R1 must be configured to reach the 10.0.3.0/24 network from the
10.0.1.0/24 segment.
Which command must be used to configure the route?
- A. route add 10.0.3.0 mask 255.255.255.0 10.0.4.3
- B. ip route 10.0.3.0 255.255.255.0 10.0.4.3
- C. ip route 10.0.3.0 0.255.255.255 10.0.4.2
- D. route add 10.0.3.0 0.255.255.255 10.0.4.2
正解：B
質問 # 131
Which command prevents passwords from being stored in the configuration as plain text on a router or switch?
- A. username cisco password encrypt
- B. enable secret
- C. service password-encryption
- D. enable password
正解：C
解説：
Section: Security Fundamentals
質問 # 132
What are two reasons for an engineer to configure a floating static route? (Choose two.)
- A. to route traffic differently based on the source IP of the packet
- B. to control the return path of traffic that is sent from the router
- C. to automatically route traffic on a secondary path when the primary path goes down
- D. to support load balancing via static routing
- E. to enable fallback static routing when the dynamic routing protocol fails
正解：C、E
質問 # 133 
Refer to the exhibit. An extended ACL has been configured and applied to router R2. The configuration failed to work as intended.
Which two changes stop outbound traffic on TCP ports 25 and 80 to 10.0.20.0/26 from the 10.0.10.0/26 subnet while still allowing all other traffic? (Choose two.)
- A. The ACL must be configured the Gi0/2 interface inbound on R1.
- B. The source and destination IPs must be swapped in ACL 101.
- C. Add a "permit ip any any" statement at the end of ACL 101 for allowed traffic.
- D. Add a "permit ip any any" statement to the beginning of ACL 101 for allowed traffic.
- E. The ACL must be moved to the Gi0/1 interface outbound on R2.
正解：B、C
解説：
Section: Security Fundamentals
質問 # 134
......
200-301試験の問題集簡単まとめ：https://jp.fast2test.com/200-301-premium-file.html
リアル200-301は100% カバー率リアル試験問題を使おう：https://drive.google.com/open?id=1udQ6TUV9TG7gUKkVIlWH321U7oht77w3