200-301試験問題集、200-301練習テスト問題 [Q307-Q327]

200-301試験問題集、200-301練習テスト問題

PDF問題（2025年最新）実際のCisco 200-301試験問題

Cisco 200-301試験は、CCNA認定試験の以前のバージョンすべてを置き換える新しいバージョンです。最新のネットワーキング業界のトレンドと技術に合わせて設計されています。試験は120問から構成され、候補者は120分間でそれを完了する必要があります。問題は多肢選択形式であり、試験の合格スコアは1000点中825点です。

Cisco 200-301認定試験は、2020年2月に退職した人気のあるCCNA認定の後継者です。新しい認定は、ネットワーキング業界の変化と、新しいテクノロジーなどのネットワーク専門家の需要の増加を反映するように設計されています。クラウドコンピューティング、IoT、およびネットワーク自動化として。認定は、ネットワーキングの知識とスキルを更新したい専門家にも適しています。

質問 # 307
Which two commands can be used to verify a trunk link configurationt status on a given cisco switch? (choose two)

A. show interfaces trunk
B. show interfaces switchport
C. show interfaces vlan
D. show ip interface brief
E. show interfaces interface

正解：A、B

質問 # 308
Refer to the exhibit.

A packet is being sent across router R1 to host 172.16.0.14. What is the destination route for the packet?

A. 209.165.200.254 via Serial0/0/0
B. 209.165.200.246 via Serial0/1/0
C. 209.165.200.250 via Serial0/0/0
D. 209.165.200.254 via Serial0/0/1

正解：B

質問 # 309
Refer to the exhibit.

What commands are needed to add a subinterface to Ethernet0/0 on R1 to allow for VLAN 20, with IP address
10.20.20.1/24?

A. R1(config)#interface ethernet0/0.20
R1(config)#ip address 10.20.20.1 255.255.255.0
B. R1(config)#interface ethernet0/0
R1(config)#ip address 10.20.20.1 255.255.255.0
C. R1(config)#interface ethernet0/0.20
R1(config)#encapsulation dot1q 20
R1(config)#ip address 10.20.20.1 255.255.255.0
D. R1(config)#interface ethernet0/0
R1(config)#encapsulation dot1q 20
R1(config)#ip address 10.20.20.1 255.255.255.0

正解：C

質問 # 310
Which WAN access technology is preferred for a small office / home office architecture?

A. broadband cable access
B. frame-relay packet switching
C. dedicated point-to-point leased line
D. Integrated Services Digital Network switching

正解：A

解説：
Section: Network Fundamentals

質問 # 311
Drag drop the descriptions from the left onto the correct configuration-management technologies on the right.

正解：

解説：

Explanation

The focus of Ansible is to be streamlined and fast, and to require no node agent installation.
Thus, Ansible performs all functions over SSH. Ansible is built on Python, in contrast to the Ruby foundation of Puppet and Chef.
TCP port 10002 is the command port. It may be configured in the Chef Push Jobs configuration file .
This port allows Chef Push Jobs clients to communicate with the Chef Push Jobs server.
Puppet is an open-source configuration management solution, which is built with Ruby and offers custom Domain Specific Language (DSL) and Embedded Ruby (ERB) templates to create custom Puppet language files, offering a declarative-paradigm programming approach.
A Puppet piece of code is called a manifest, and is a file with .pp extension.

質問 # 312
Refer to exhibit.

Which statement explains the configuration error message that is received?

A. IT is a network IP address.
B. It belongs to a private IP address range.
C. The router does not support /28 mask.
D. It is a broadcast IP address

正解：D

質問 # 313
Refer to the exhibit.

How should the configuration be updated to allow PC1 and PC2 access to the Internet?

A. Remove the overload keyword from the ip nat inside source command.
B. Modify the configured number of the second access list.
C. Add either the ip nat {inside|outside} command under both interfaces.
D. Change the ip nat inside source command to use interface GigabitEthernet0/0.

正解：C

質問 # 314
Drag and drop the IPv4 network subnets from the left onto the correct usable host ranges on the right

正解：

解説：

質問 # 315
Refer to the exhibit.

Which change to the configuration on Switch?
allows the two switches to establish an GtherChannel?

A. Change the protocol to PAqP and use auto mode
B. Change the LACP mode to active
C. Change the LACP mode to desirable
D. Change the protocol to EtherChannel mode on.

正解：B

質問 # 316
When a WPA2-PSK WLAN is configured in the Wireless LAN Controller, what is the minimum number of characters that is required in ASCII format?

A. 0
B. 1
C. 2
D. 3

正解：D

質問 # 317
Refer to the exhibit.

Switch AccSw2 has just been added to the network along with PC2. All VLANs have been implemented on AccSw2. How must the ports on AccSw2 be configured to establish Layer 2 connectivity between PC1 and PC2?

正解：C

質問 # 318
Refer to the exhibit.

R1 has taken the DROTHER role in the OSPF DR/BDR election process. Which configuration must an engineer implement so that R1 is elected as the DR?

A. Option C
B. Option D
C. Option B
D. Option A

正解：C

質問 # 319
Refer to the exhibit.

A network administrator must permit SSH access to remotely manage routers in a network. The operations team resides on the 10.20.1.0/25 network. Which command will accomplish this task?

A. no access-list 2699 deny tcp any 10.20.1.0 0.0.0.127 eq 22
B. no access-list 2699 deny ip any 10.20.1.0 0.0.0.255
C. access-list 2699 permit udp 10.20.1.0 0.0.0.255
D. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22

正解：B

解説：
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.

質問 # 320
Drag and drop the network protocols from the left onto the correct transport services on the right.

正解：

解説：

質問 # 321
Refer to the exhibit. Which VLAN ID is associated with the default VLAN in the given environment?

A. VLAN 5
B. VLAN 20
C. VLAN 1
D. VLAN 10

正解：C

解説：
Cisco switches always have VLAN 1 as the default VLAN, which is needed for many protocol communication between switches like spanning-tree protocol for instance.
You can't change or even delete the default VLAN, it is mandatory.
The native VLAN is the only VLAN which is not tagged in a trunk, in other words, native VLAN frames are transmitted unchanged.

質問 # 322
Drag and drop the statements about networking from me left onto the corresponding networking types on the right

正解：

解説：

質問 # 323
Drag and drop the Rapid PVST+ forwarding state actions from the left to the right. Not all actions are used.

正解：

解説：

質問 # 324
Refer to the exhibit.

PC1 regularly sends 1800 Mbps of traffic to the server. A network engineer needs to configure the EtherChannel to disable Port Channel 1 between SW1 and SW2 when the Ge0/0 and Ge0/1 ports on SW2 go down. Which configuration must the engineer apply to the switch?

正解：B

質問 # 325
Refer to the exhibit.

An access list is required to permit traffic from any host on interface G0/0 and deny traffic from interface G/0
/1. Which access list must be applied?

A. Option C
B. Option D
C. Option B
D. Option A

正解：D

質問 # 326
Refer to the exhibit.

An engineer configured NAT translations and has verified that the configuration is correct.
Which IP address is the source IP?