[2022年02月] ベストな問題集を使おう Microsoft Dynamics 365 MB-320 専門試験問題 [Q71-Q91]

[2022年02月] ベストな問題集を使おうMicrosoft Dynamics 365 MB-320専門試験問題

100%の合格率を試そう！更新されたのはMB-320試験問題 [2022]

Microsoft MB-320 認定試験の出題範囲：

トピック	出題範囲
トピック 1	Implement Containerized Packaging, Implement And Configure Rebates, Implement Lot And Batch Control Processes
トピック 2	Perform Processes To Manage Scrap And Waste Of A Batch Order Configure Batch Reservations And Expiration Dates Perform A Batch Rework
トピック 3	Implement Production Scheduling And Subcontracting Implement Activity-Based Subcontracting Perform Production Batch Order Lifecycle
トピック 4	Process Lean Orders By Using Kanban Boards Process Production Orders Identify The Process Workflows For Managing A Production Environment
トピック 5	Identify Items And Substitute Items Within A Bill Of Material (BOM) Or Formula Apply Product Compliance Standards Set Up And Maintain Commodity Pricing
トピック 6	Identify And Configure Batch Attributes For Processes Integrate Manufacturing Processes With Warehouse Management System (WMS)
トピック 7	Identify The Capabilities And Limitations Of The Manufacturing Executions Module Identify The Responsibilities Of The Security Role Managing The Production Processes
トピック 8	Configure And Manage Constraints, Build A Product Configuration Model Create Common Components Of Production And Lean Orders
トピック 9	Configure And Manage Costing Sheets, Inventory Dimensions In Production, Manage Operations And Routes, Manage A Product Configuration Model
トピック 10	Create, Process, And Manage Production Batch Orders Create Planned Production Batch Orders By Using The Master Planning Module
トピック 11	Manage Scheduling And Subcontracting Perform Processes To Manage Scrap And Waste Of A Discrete Order Create And Maintain Project Items And Item Tasks
トピック 12	Implement And Manage Work Calendars, Implement And Manage Resources Describe The Purpose And Capabilities Of The Product Configuration Models

質問 71
You are developing a new car audio system kit. The kit configuration has restrictions based on car model, speaker size, and other expression constraints.
You need to set up a new item for the car audio system.
How should you create the new product? To answer, select the appropriate option in the answer area.
NOTE: Each correct selection is worth one point.

正解:

解説:

Explanation

質問 72
A process manufacturing company is implementing Dynamics 365 for Finance and Operations. The company will use multiple process manufacturing functionalities including by-products.
You need to configure by-product formula allocation methods.
Which methods should you use? To answer, drag the appropriate by-product burden allocation methods to the correct scenarios. Each method may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content NOTE: Each correct selection is worth one point.

正解:

解説:

Explanation

質問 73
A skateboard manufacturer uses route operations to schedule resources and estimate units per hour. All products use the sample sub assembly item and resource sanding process.
You observe an increase in the number of units a sanding belt resource can produce. The production schedule is now inaccurate due to the number of units the sanding belt line can produce.
You must make a permanent change to the number of units the resource can produce for all future orders.
You need to adjust the process quantity on the route operation.
Which three actions should you perform in sequence? To answer, move the appropriate actions form the list of actions to the answer area and arrange them in the correct order.

正解:

解説:

質問 74
You need to modify the production order defaults for the manufacturing execution production order Start process.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

正解:

解説:

Explanation

質問 75
A company is looking to use Dynamics 365 for Finance and Operations.
The company is in the process of redesigning and retooling an existing manufacturing plant to group similar, cellular operations to improve efficiency and minimize wasted time between operations. They want to locate raw materials close to where they are needed without losing reorder visibility.
You need to set up their environment.
Which kind of production type should you implement?

A. Discrete manufacturing
B. Lean manufacturing
C. Process manufacturing
D. Manufacturing execution

正解: B

解説:
Section: Set up and configure manufacturing

質問 76
A manufacturer uses discreet orders and manually consumes material after reporting products as finished.
You are performing an end-of-month closing for remaining picking lists on production orders. You must not be required to consume the full amount of material on production order picking lists as a result of improved production efficiency. When the production manager verifies that no material is left to consume, there are remaining back-ordered amounts.
You need to pick the line item short and eliminate the remaining demand.
What should you do?

A. Enter the consumption amount on the line to match the actual amount used, and delete the remaining amount.
B. Delete the item from the Bill of materials for the finished good.
C. Change the Coverage group on item option to manual.
D. Enter the consumption amount on the line to match the actual amount used and select end on the production order picking list.

正解: D

質問 77
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company implements Dynamics 365 Supply Chain Management for their Lean manufacturing environment.
There has been an engineering change to a fixed quantity product that is in production. This change will add an additional processing step as the second step. The existing version must be phased out and replaced by the new version.
You need to ensure that the engineering change takes affect at the end of the month.
Solution:
1.) Add a new version to the existing production flow. Set the expiration date to the end of the month.
2.) Create an activity for the new process step and add it in the proper sequence
3.) Create a Kanban rule that incorporates the new activity. Set the expiration date to the end of the month.
4.) Edit the existing Kanban rule. Set the expiration date to the end of the month. Specify the new Kanban rules as the replacement rule Does the solution meet the goal?

A. Yes
B. No

正解: B

質問 78
A chemical manufacturing company uses Dynamics 365 for Finance and Operations. A batch of material has a quality issue and must be reworked.
You need to create the rework order the production.
Which three options must be set? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Set the batch order as a rework batch
B. Pick the reworked inventory after estimation
C. Set the item as a Formula production type
D. Specify the batch number of the batch order
E. Reserve the reworked inventory after estimation

正解: A,C,E

解説:
Section: Create, process, and manage production batch orders

質問 79
You are the production scheduler for a manufacturing company. You have run the Resource Group Capacity report as shown in the Resource Group 21 Capacity exhibit. (Click the Resource Group 21 Capacity tab).

After reviewing that report, you run Resource Capacity reports as shown in the Resource 2101 and 2102 Capacity exhibits. (Click the 2101 Capacity and 2102 Capacity tabs.)

You run the Gantt chart report as shown in the Gantt exhibit to determine the production orders scheduled on the resources. (Click the Gantt tab.)

You need to determine the method to schedule the production lines.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

正解:

解説:

質問 80
A company overstates on-hand raw materials due to the time it takes to post raw materials as consumed when production orders are processed.
All items used to manufacture finished goods must be consumed when a finished good is reported as finished.
You must not change all bill of materials lines to use the option of flushing principal.
You need to ensure that all production orders consume raw materials at Report as finished.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

正解:

解説:

Explanation

Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/production-parameters-manufac

質問 81
You need to set up the state control for sales of motorcycles.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Create an inclusive restricted product list for United States and add the motorcycle part to the list.
B. Create an exclusive restricted product list for Missouri and add the motorcycle part to the list.
C. Create an exclusive restricted product list for California and add the motorcycle part to the list.
D. Create an inclusive restricted product list for United States. Do not add the motorcycle part to the list.

正解: A,C

解説:
Reference:
https://stoneridgesoftware.com/working-with-restricted-products-in-dynamics-365-operations/

質問 82
A company wants to account for the time to set up a machine to manufacture a new part.
You need to set up the costing calculations in the system.
Which three calculation group warnings can you set up? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

A. No resources
B. No route
C. No cost price
D. No BOM
E. No consumption

正解: A,C,E

質問 83
You are the production planner for a manufacturing company.
After running operations scheduling for a production order, the following error message displays:

You need to identify the cause of the error.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Review the available resources for Operation 10. Navigate to the Resource form and validate whether there is a calendar assigned
B. Navigate to the work calendar and view working times. Validate that there are working days created in the scheduled period.
C. Review the calendar for the resource to determine if it is expired.
D. Review the resource group assigned to Operation 10. Check to see if there is a calendar assigned and if the calendar is expired.

正解: A,C

質問 84
A configure-to-order company is implementing Dynamics 365 for Finance and Operations. The company is preparing to use the product configuration model functionality to develop the Bill of materials (BOM), routes and valid configuration combinations.
You need to set up the configuration models, constraints, and pricing.
In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.

正解:

解説:

質問 85
A company plans to implement routing and route postings.
You must direct postings of route cards based upon the route groups at Report as finished.
You set the start default order setting for route posting to Never and the Report as finished setting to Route Group Dependent.
You set up the route group as shown below.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.

正解:

解説:

Explanation

質問 86
A company uses Dynamics 365 Process manufacturing.
Employees work a half day so that they can attend a company event. You have a rush order that must be completed that same day.
After reviewing the net requirements of the batch order, only 400 of the total quantity of 1400 units must be completed today. The production manager must retain the original batch number as the quantity of 400. The original batch number must appear on documentation for the customer.
You need to split the batch order into two orders.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

正解:

解説:

1 - Select the batch order.
2 - Select Split
3 - Enter 1,000 in the split quantity field.

質問 87
A configure-to-order company is implementing Dynamics 365 for Finance and Operations. The company is preparing to use the product configuration model functionality to develop the Bill of materials (BOM), routes and valid configuration combinations.
You need to set up the configuration models, constraints, and pricing.
In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.

正解:

解説:

Explanation

質問 88
A company manufactures high-end speakers. Customers may choose different color finishes and front grills.
You build a product configuration model to represent this speaker.
You add the following attributes for the finish and grill.
You need to create a constraint that defines the allowable finish and grill combinations.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions and arrange them in the correct order.

正解:

解説:

Explanation

質問 89
A company produces homeopathic lotions for pain relief. The lotions use a combination of ProductA and ProductB. ProductA is the primary ingredient. You use ProductB to adjust the concentration of active ingredients in the lotion.
You need to ensure that the lotion final product has a consistent concentration of anti-inflammatory agents.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Set the formula line type of ProductB to Compensating.
B. Set the formula line type of ProductB to Active.
C. Set the formula line type of ProductA to Compensating.
D. Set the formula line type of ProductC to None.
E. Set the formula line type of ProductA to Active.

正解: A,E

質問 90
You need to resolve the production manager issue.
How should you configure manufacturing execution? To answer, select the appropriate option in the answer area.
NOTE: Each correct selection is worth one point.