あなたを合格させる試験には100%確認済みD-VXR-DY-23試験問題
D-VXR-DY-23問題集PDFでD-VXR-DY-23リアル試験問題解答
質問 # 40
What is the maximum number of nodes supported in a standard VxRail Appliance configuration?
- A. 0
- B. 1
- C. 2
- D. 3
正解：A
質問 # 41
Which vSAN license includes entitlement for vROps 8 Advanced Services?
- A. Enterprise Plus
- B. Standard
- C. Advanced
- D. Enterprise
正解：A
質問 # 42
An implementation engineer is performing a precheck on a VxRail cluster before expansion. During validation, they find out that the host is not compatible. Use the VxRail simulator to describe why the host is Incompatible. Note: It is necessary to close (x) the simulator window before you can select a response to this question.
- A. Insufficient number of vSphere licenses
- B. bmc and bios are running older versions
- C. Firmware of ESXi host needs to be updated
- D. Invalid vCenter 5erver license
正解：D
質問 # 43
Match each VxRail API request with the information to be retrieved.
正解：
解説：
質問 # 44
A newly installed VxRail system appears to have poor vSAN performance for all VMs on the cluster.
What can be used to identify the issue?
- A. esxtop with v view
- B. resxtop with d view
- C. resxtop with s view
- D. esxtop with x view
正解：C
質問 # 45
Where is the VxRail Manager pre-installed on a newly shipped, 4 node VxRail Model G410 system?
- A. First node
- B. Node with the highest serial number
- C. All nodes
- D. Bottom-right node from the front
正解：A
質問 # 46
What VxRail model is designed to support graphic intensive VDI workloads?
- A. P Series
- B. V Series
- C. E Series
- D. S Series
正解：B
質問 # 47
A VxRail cluster is being deployed with an existing vCenter Server.
Which role needs to be assigned to the new VxRail Management User account within vCenter Server?
- A. Trusted Infrastructure Administrator role
- B. Administrator role
- C. Read-only role
- D. No role needs to be assigned
正解：D
質問 # 48
A systems engineer is tasked to configure a VxRail cluster and notices that the VxRail Deployment Wizard fails to launch. The engineer discovers that the software is corrupted.
What should the engineer do to address the issue?
- A. Return the nodes to the original build state
- B. Check vCenter and troubleshoot the build failure
- C. Use the VMware Host Client and iDRAC to access the nodes for troubleshooting
- D. Verify that the JSON file is not corrupted and has all the required values
正解：A
質問 # 49
An implementation engineer is planning to deploy a new VxRail cluster.
How long is the evaluation period for vSphere licensing on each node?
- A. 90 days after nodes are delivered
- B. 90 days after nodes are powered on
- C. 60 days after nodes are delivered
- D. 60 days after nodes are powered on
正解：D
質問 # 50
Which service determines the primary node after powering on the VxRail nodes during the deployment of a VxRail cluster?
- A. Election
- B. Marvin
- C. Loudmouth
- D. Mystic
正解：A
質問 # 51
What is the function of Witness Traffic Separation in a VxRail Stretched Cluster?
- A. Separates the witness traffic from the customer management VLAN
- B. Separates the witness traffic from the vSAN backend VLAN
- C. Splits the traffic to enable an offsite backup of virtual machines
- D. Splits the traffic to provide an additional layer of redundancy
正解：B
質問 # 52
For which VxRail model must the iDRAC NIC Selection be set to LOM1?
- A. D Series
- B. E Series
- C. G Series
- D. S Series
正解：C
質問 # 53
What is a Dell EMC converged platform product?
- A. Vblock/VxBlock
- B. VxRack
- C. VxRail
- D. Vscale Architecture
正解：A
質問 # 54
Which two vSAN licenses include entitlement for VMware HCI Mesh? (Select 2)
- A. Enterprise Plus
- B. Standard
- C. Advanced
- D. Enterprise
正解：A、D
質問 # 55
What is the default VLAN that is configured on the nodes and is used for device discovery during initial implementation and node expansion?
- A. 0
- B. 1
- C. 2
- D. 3
正解：C
質問 # 56
What Is a supported method for racking nodes for a new VxRail deployment?
- A. With server exhaust facing the cold aisle
- B. In the rack hosting the network equipment used to manage the iDRAC
- C. Starting with node 1 at the top of the rack
- D. With PDUs connected to 120v single phase 5-amp electrical circuits
正解：C
質問 # 57
A VxRail cluster 4.7.xxx environment is managed by the internal vCenter Server. An implementation engineer plans to deploy a new VxRail cluster using the existing vCenter Server instance, then use the customer-supplied VDS to manage both VxRail clusters.
What must be done?
- A. Migrate the internal vCenter Server to an external vCenter Server, then upgrade the VxRail 4.7.xxx to 7.0.100
- B. Upgrade the VxRail version from 4.7.xxx to 7.0.000
- C. Migrate the internal vCenter Server to an external vCenter Server, then merge the PSC
- D. Upgrade the internal vCenter Server to version 7.0
正解：A
質問 # 58
In a 24 node Stretched Cluster VxRail deployment, what is the acceptable Rout Trip Time (RTT) latency between sites?
- A. Primary to witness site RTT latency: 75 ms
Secondary to witness site RTT latency: 150 ms
Primary to secondary site RTT latency: 5 ms - B. Primary to witness site RTT latency: 75 ms
Secondary to witness site RTT latency: 75 ms
Primary to secondary site RTT latency: 1 ms - C. Primary to witness site RTT latency: 50 ms
Secondary to witness site RTT latency: 50 ms
Primary to secondary site RTT latency: 6 ms - D. Primary to witness site RTT latency: 10 ms
Secondary to witness site RTT latency: 10 ms
Primary to secondary site RTT latency: 10 ms
正解：B
質問 # 59
Refer to the exhibit.
You have received the attached PEQ for an upcoming VxRail implementation. However, you have no additional supporting documents.
Who should be your first point of contact for additional information?
- A. Project Manager
- B. Systems Engineer
- C. Customer
- D. Solutions Architect
正解：A
質問 # 60
A VxRail 7.0.100 environment is managed by the internal vCenter Server. The customer asks the implementation engineer to deploy a new VxRail cluster using the existing vCenter Server.
What should the response of the engineer?
- A. Not supported for internal vCenter Server
- B. Only supported on VxRail software 4.7.xxx
- C. Supported by neither the internal vCenter Server nor external vCenter Server
- D. Not supported on VxRail software 7.0.100
正解：D
質問 # 61
Which mode must be enabled to support multiple VLANs on ToR ports?
- A. Port-Channel
- B. Access
- C. Trunk
- D. Link Aggregation
正解：C
質問 # 62
Beginning with VxRail version 4.7, which product license option has changed?
- A. vSphere
- B. vCenter
- C. vSAN
- D. Mware Log Insight
正解：C
質問 # 63
VxRail Validation is failing for a deployment engineer during initialization. The error states that Node 1 cannot reach Node 2 on the Management network. While investigating the issue, the deployment engineer is unable to ping the management network default gateway.
Which step in the VxRail Configuration Portal should have been followed to prevent the situation?
- A. The NIC Configuration must be set to 4x25GbE to support the network devices.
- B. The VxRail Manager and vCenter server must be logically separated on different subnets.
- C. The Pre-Deployment Checklist should have been reviewed and issues resolved.
- D. The cluster should have been configured with two virtual distributed switches.
正解：C
質問 # 64
......
D-VXR-DY-23問題集100合保証には最新のサンプル：https://jp.fast2test.com/D-VXR-DY-23-premium-file.html
準備D-VXR-DY-23問題解答無料更新には100%試験合格保証 [2025年更新]：https://drive.google.com/open?id=1r7IPaoJ1LvA8oFX-urEwYf_6bGkd0qu_