トップクラスCisco 300-610オンライン問題集で更新された[2025年05月]
300-610練習問題集で検証済みのFast2test更新された260問題あります
Cisco 300-610：Designing Cisco Data Center Infrastructure Examは、データセンターインフラストラクチャソリューションを設計および実装する専門家のための理想的な認定試験です。この試験は、Ciscoソリューションを使用してデータセンターインフラストラクチャソリューションを設計および実装する候補者の知識とスキルを検証します。この試験は英語と日本語で利用可能で、世界中のPearson VUEテストセンターで受験できます。
Cisco 300-610試験は90分間の試験で、60〜70問の問題から構成されています。この試験は、組織のビジネス要件を満たすソリューションを設計する能力を含む、データセンターインフラストラクチャの設計に関する候補者の知識を測定するために設計されています。また、試験は、Ciscoのテクノロジーを使用してデータセンターインフラストラクチャソリューションを設計および実装する能力を測定するためにも設計されています。
質問 # 60
An engineer manages hundreds of Cisco Nexus 3000 Series and 9000 Series Switches that are installed at several data centers and wants to use one of the built-in automation tools of the Cisco NX-OS Guest Shell to automate daily activities. The engineer requires a tool that uses imperative language, has extensive library support, and is object-oriented.
Which automation tool should be used to meet these requirements?
- A. Bash
- B. YAML
- C. Perl
- D. Python
正解：D
解説：
D18912E1457D5D1DDCBD40AB3BF70D5D
質問 # 61
A company has added a new FCoE storage array to increase the performance of datastore access for end users. This storage array is directly connected to the Cisco Nexus 5672UP switches using four 10G port-channel interfaces. After deployment, the end users fail to access the datastore compared to the older solution. A network engineer verified the port-channel interface and finds that the congestion occurs when PFC frames are generated at the FCoE ingress interface. Which action must be taken to resolve the congestion issue?
- A. Add an additional FCoE VLAN to the SAN network.
- B. Enable the FCoE class in QoS on Cisco Nexus 5672UP switches.
- C. Increase the queuing buffer in the port-channel interface connected to the storage array.
- D. Reserve bandwidth for FCoE VLAN on the port-channel interface connected with storage.
正解：B
質問 # 62
A network consultant must design a high availability interconnection of a clustered Cisco UCS Fabric Interconnect toward two upstream Layer 2 switches. The Ethernet interconnection must use all redundant links and have no impact on the STP domain size.
Which connectivity solution must be used?
- A. Cisco UCS Fabric Interconnect in switch mode with dual uplinks distributed evenly to the upstream switches
- B. Cisco UCS Fabric Interconnect in end host mode with dual uplinks distributed evenly to the upstream switches
- C. Cisco UCS Fabric Interconnect in end host mode with a single uplink toward each upstream switch to eliminate any change to the STP domain size
- D. Cisco UCS Fabric Interconnect in switch mode with a single uplink toward each upstream switch to eliminate any change to the STP domain size
正解：B
質問 # 63
Which two naming formats identify target or initiator iSCSI nodes? (Choose two.)
- A. OUI
- B. WWN
- C. WWPN
- D. EUI
- E. IQN
正解：B、E
解説：
https://docs.vmware.com/en/VMware-vSphere/5.5/com.vmware.vsphere.storage.doc/GUID-686D92B6-A2B2-4944-8718-F1B74F6A2C53.html
質問 # 64
A data center with over 4000 VLANs must be stretched lo a disaster recovery site. The solution must support the migration of virtual machines to a disaster recovery site. To support the scalability of the solution, the internal fabric of the main site must be from the DCI network. The connecting network infrastructure uses a 10 Gbps link with PIM ASM supported, which will be replaced with a different overlay in the next 12 months. The solution must support head-end replication for broadcast, unknown unicast, and multicast traffic. Which solution must be used to meet these requirements?
- A. VXLAN Multi-Site
- B. LISP
- C. OTV
- D. MPLS over GRE
正解：A
質問 # 65
Refer to the exhibit. A Cisco engineer is configuring a FlexPod data center for SAP with Cisco ACI, Cisco UCS Manager 4.0, and NetApp AFF A-Series. All systems and fabric links feature redundancy and provide end-to-end high availability. After the engineer sets the needed VLANs on the NetApp controller ports and adds them to the data broadcast domain, the engineer must make the storage disks visible for the UCS hosts. Which action must be taken on the UCS to accomplish this task?
- A. Configure IQN pools for iSCSI boot.
- B. Provide a storage virtual machine.
- C. Create aggregates in ONTAP.
- D. Enable HTTPS access on the servers.
正解：B
質問 # 66
A network engineer must perform a VMM integration for the VMWare vCenter platform with the Cisco ACI Fabric. The vCenter is already installed in one of the rack servers connected to ACI leaf switches in a vPC mode.
Which type of management network must be used to integrate vCenter with ACI?
- A. In-band management
- B. ARC infra
- C. out-of-band management
- D. VLAN infra
正解：C
質問 # 67
Which type fields can an engineer use to identify an iSCSI participant? (Choose two.)
- A. port number
- B. hostname
- C. preshared key
- D. identifying tag
- E. type
正解：A、B
質問 # 68
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
正解：
解説：
質問 # 69
A Cisco engineer is configuring MPLS VPN BGP at a customer site that is connected to the provider site by more than one path MPLS VPN BGP Local Convergence link protection is enabled. After the engineer installs the main forwarding path and the redundant backup path within the BGP, they assign a unique route distinguisher to each VRF table on all PE devices that serve as a backup to the link. What is a prerequisite for this local convergence to work?
- A. IP/GRE is enabled.
- B. The system is performing a PE-CE link protection on both ends
- C. Interautonomous system option A (back-to-back VRF) is active.
- D. BGP must support lossless switchover between operational paths
正解：B
質問 # 70
Refer to the exhibit. Server 1 fails to connect to the storage array over the Storage Area Network (SAN) of the Cisco NDS 9000 Series Switch.
The requirements are to redesign the storage network and keep these considerations in mind:
The traffic from each of the server must be redundant and isolated.
The design must tolerate hardware and software failures and upgrades of SAN fabric devices.
Which action must be taken to meet these requirements?
- A. Add an additional supervisor to the Fibre Channel switch to support nondisruptive upgrades.
- B. Place an additional Fibre Channel switch to create two physically independent storage fabrics.
- C. Create a SAN port channel that faces the storage device to sustain a link failure.
- D. Enable NPV and F-Port-channel on ports that face Server 1 on the Fibre Channel switch to create redundant paths.
正解：D
質問 # 71
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
正解：
解説：
質問 # 72
Drag and drop the SAN components from the left onto the correct design considerations on the right.
正解：
解説：
質問 # 73
A network engineer designs a Cisco Nexus data center network for a client-server farm using a pair of Nexus 9000 Series Switches in a vPC setup. Each server connects with two interfaces to both Nexus switches. The Nexus switches must always initiate the negotiation with the server.
Which feature should be used in this design to ensure traffic is forwarded from the server to the data center network?
- A. PAgP mode auto
- B. PAgP mode desirable
- C. LACP mode auto
- D. LACP mode active
正解：D
質問 # 74
Which Ethernet to Cisco Fabric Interconnect connectivity configuration is supported when FCoE is implemented?
- A. vPC that has unified uplinks
- B. cross-connections with pinning
- C. Ethernet and unified ports on the same port channel
- D. VSS that has unified uplinks
正解：B
解説：
FCoE Uplink with vPC supported, but no vPC that has unified uplinks.
https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-manager/116188- configure-fcoe-00.html#anc7
質問 # 75
An engineer is designing a data center that uses FCIP. How is QoS configured in this environment?
- A. Two separate DSCP values must be configured, one of all of the FCIP frames in the control TCP connection and another for all of the FCIP frames in the data connection.
- B. A separate DSCP value must be configured for all FCIP VSAN traffic.
- C. A separate DSCP value and CoPP must be configured for all FCIP traffic and another for all of the FCIP in the data connection.
- D. A separate DSCP value and priority queuing must be configured for all FCIP traffic.
正解：A
解説：
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/ ipsvc/nxos/ipsvc/cfcip.html
質問 # 76
Which mode must be enabled on a Cisco UCS Fabric Interconnect to connect directly to a storage array?
- A. FC switching mode
- B. FC end-host mode
- C. NPV mode
- D. NPIV mode
正解：A
質問 # 77
Refer to the exhibit.
An engineer must assign multiple Fibre Channel IDs to a single port channel. Which two features must be enabled this goal? (Choose two.)
- A. SAN Pin Groups on the Cisco UCS Fabric Interconnects.
- B. end-host mode feature on the Cisco UCS Fabric Interconnects
- C. NPV feature on the Cisco MDS Series.
- D. Smart Zoning feature on the Cisco UCS Fabric Interconnects
- E. NPIV feature on the Cisco MDS Series
正解：C、E
質問 # 78
Which element is the main functional component of the architecture that separates the internal fabric and the external network that connects sites when VXLAN EVPN is deployed multisite?
- A. border gateway
- B. border leaf
- C. service gateway
- D. service leaf
正解：A
解説：
The main functional component of the EVPN Multi-Site architecture is the border gateway, or BGW. BGWs separate the fabric-side (site-internal fabric) from the network that interconnects the sites (site-external DCI) and mask the site-internal VTEPs.
link:https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series- switches/white-paper-c11-739942.html
質問 # 79
......
最新（2025)Cisco 300-610試験問題集：https://jp.fast2test.com/300-610-premium-file.html
更新された300-610試験問題集でPDF問題とテストエンジン：https://drive.google.com/open?id=1PqSTgtUupgc4KIjw-BCOHf0cLQTNMxde