[Q42-Q61] 究極のガイド準備問題300-610には正確なPDF解答[2023年10月29日]

究極のガイド準備問題300-610には正確なPDF解答[2023年10月29日]

合格できるCiscoの試験問題集

Cisco 300-610認定試験に合格するためには、データセンターインフラ設計原則とCiscoテクノロジーに深い理解が必要です。ビジネス要件を満たす高可用性で耐障害性のあるデータセンターアーキテクチャを計画・設計できることが求められます。また、Fibre Channel、FCoE、iSCSIなどのストレージネットワーク技術やUCS、サーバー仮想化などのコンピューティング技術についても熟知している必要があります。さらに、AnsibleやPythonなどの自動化技術についても知識を有しており、データセンターインフラタスクを自動化できることが望ましいです。Cisco 300-610認定試験に合格することで、Ciscoテクノロジーを使用したデータセンターインフラ設計や実装において、信頼性の高い効率的なソリューションを提供する能力を持つことが証明されます。

質問 # 42
Which two statements describe Ethernet switching mode on Cisco UCS 6100 Series Fabric Interconnects? (Choose two.)

A. The STP parameter configuration is supported.
B. STP runs on the server ports.
C. STP runs on the uplink ports of each VLAN, as defined by PVSTP+.
D. STP runs on the uplink ports of each VLAN, as defined by MSTP.
E. The STP parameter configuration is unsupported.

正解：C、E

質問 # 43
An engineer requires a solution that achieves Ethernet traffic forwarding on all available paths from the hosts to the Cisco Nexus Fabric Extender and from the Fabric Extenders to the Cisco Nexus 5000 Series Switches. The NIC teaming from the Fabric Extender to a server should use an LACP EtherChannel. Which solution should be implemented to meet these requirements?

A. Virtual Port Channel
B. Enhanced Virtual Port Channel

正解：B

解説：
C. Virtual Port Channel Plus (vPC+) D. Back-to-Back Virtual Port Channel

質問 # 44
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.

正解：

解説：

質問 # 45
Refer to the exhibit.

What must be the default gateway of the servers in EPG Web?

A. NAT appliance
B. subnet address of L3Out
C. subnet address of BD1
D. subnet address of BD2

正解：A

質問 # 46
A cloud service provider provisioned four active/active data centers in various locations within the country at 50 miles between each data center. The data centers must provide redundant network infrastructure and always be available to customers.
Which two data center design steps must be used to meet these requirements? (Choose two.)

A. Implement active cluster in data centers 1 and 2 and backup in 3 and 4.
B. Use asynchronous replication between data centers 1 and 2.
C. Provide application hosting services to customers from the closest data center.
D. Configure application data replication to all backup data centers.
E. Deploy database services in data center 1 and application layer to other data centers.

正解：C、D

質問 # 47
An engineer must design a Cisco UCS environment that will connection to a storage area network. The solution must include support for these conditions:
* connectivity to the existing 10 Gigabit Ethernet network
* booting the server infrastructure from the network
* integration with the existing Fibre Channel storage arrays
* lossless data transfer
Which solution should be used to meet these requirements?

A. FCoE
B. FCP
C. NFS
D. CIFS

正解：A

質問 # 48
A network architect proposes a distinct Fibre Channel fabric to be used for a Cisco UCS blade server that hosts critical applications. Which action should be implemented for the fibre Channel traffic from the vHBA of this service to pass through the I/O module in the Cisco chassis to a specified uplink Fibre Channel port?

A. Enable persistent binding in the vHBA policy.
B. Update the applled Fibre Channel adapter policy.
C. Include a SAN pin group in the vHBA policy.
D. Update the applled global QoS policy.

正解：C

解説：
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Storage-Mgmt/3-2/b_UCSM_GUI_Storage_Management_Guide_3_2/b_UCSM_GUI_Storage_Management_Guide_3_2_chapter_0110.pdf

質問 # 49
What are two advantages of using Cisco vPC over traditional access layer designs? (Choose two.)

A. disables spanning-tree
B. uses all available uplink bandwidth
C. supports Layer 3 port channels
D. maintains single control plane
E. no spanning-tree blocked ports

正解：B、E

質問 # 50
A company owns a large-scale compute infrastructure that consists of over 1000 servers and virtual machines. The operational complexity continues to grow with additional policies and servers added to the environment. An infrastructure engineer is looking for an automation tool to reduce the operational complexity of configuring complex infrastructure. Because of the strict security requirements, the tool must be agentless, use the secure shell for transport, and be extendable using existing Python modules. Which tool meets these requirements?

A. Puppet
B. Saltstack
C. Ansible
D. NSO

正解：C

質問 # 51
An engineer must configure a new maintenance policy that will apply to multiple Cisco UCS domains The policy must be available for use by service profiles and service profile templates created and managed n either Cisco UCS Manager or Cisco UCS Central Changes to this policy must be allowed only in Cisco UCS Central Which policy type must the engineer select to accomplish these goals?

A. global pokey
B. central policy
C. local policy
D. hybrid policy

正解：A

質問 # 52
An engineer is implementing management access to a Cisco Nexus platform. The customer requires a solution that provides isolation between the data and control planes. In addition to management that uses encryption and authentication. The customer will manage the device using both IPv4 and IPv6. Which two components should be used to meet these requirements (Choose two.)

A. SSM protocol
B. SVI interface
C. Telnet protocol
D. mgmt0 interface
E. SNMP

正解：D、E

解説：
We are talking about management only, so SSM is out. Since we need to separate between data and control plane, we should use mgmt0 interface, so SVI interface is out. Since we need to use encryption and authentication, this can be done in SNMPv3, while telnet does not support encryption, so telnet is out.

質問 # 53
An engineer must configure a new maintenance policy that will apply to multiple Cisco UCS domains The policy must be available for use by service profiles and service profile templates created and managed n either Cisco UCS Manager or Cisco UCS Central Changes to this policy must be allowed only in Cisco UCS Central Which policy type must the engineer select to accomplish these goals?

A. central policy
B. local policy
C. global policy
D. hybrid policy

正解：C

質問 # 54
An engineer must connect an existing Cisco Fabric Interconnect to an IP-based storage array. The connection be a channel made directly between the fabric interconnect expansion module and the storage array. The engineer must also consider that the environment is running FCoE for storage and uses QoS to prioritize traffic. Which port type should be used to meet these requirements?

A. server
B. Uplink
C. Network
D. Appliance

正解：D

解説：
https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-5100-series-blade-server-chassis/116075-ucs-app-connectivity-tshoot-00.html

質問 # 55
Refer to the exhibit.

A default route must be advertised into the VXLAN fabric for internet access. The engineer must use a static route because the edge firewall does not support any dynamic routing protocol. Which two features must the engineer use to allow learning and withdrawing of the default route without any manual intervention? (Choose two)

A. Network Address Translation
B. HMM tracking
C. policy-based routing
D. IP forwarding
E. anycast gateway

正解：C、E

質問 # 56
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.

正解：

解説：

質問 # 57
A company purchased a Cisco UCS system with four 5108 Chassis populated with UCS B-Series servers. The environment consists of nine Cisco HyperFlex rack servers. An engineer must provision virtual machines using an orchestration tool to optimize overall deployment time.
Which orchestration must be used to meet this requirement?

A. Cisco DNA Center
B. Cisco Network Assurance
C. Cisco AppDynamic
D. Cisco Intersight

正解：D

質問 # 58
Which two configurations allow for routing traffic between two VDCs? (Choose two.)

A. Create a policy map in the default VDC that routes traffic between the VDCs.
B. Create interfaces in the VDC that can be accessed by another VDC.
C. Cross-connect the ports between the VDCs.
D. Connect the VDCs to an external Layer 3 device.
E. Create VRF-aware software infrastructure interfaces.

正解：A、D

解説：
The Cisco NX-OS software does not support direct communication between VDCs on a single physical device. You must make a physical connection from a port allocated to one VDC to a port allocated to the other VDC to allow the VDCs to communicate.

質問 # 59
Drag and drop the technologies from the left onto the correct descriptions on the right.