問題集は全額返金保証付きの300-610問題集最大50%オフ
更新されたのは2023年12月合格させる300-610試験にはリアル練習テスト問題
Cisco 300-610 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
質問 # 103
An engineer deploys LISP VM mobility. Which feature is configured on the interfaces that have VM mobility enabled?
- A. IP redirects
- B. HSRP
- C. flow control
- D. proxy ARP
正解：D
解説：
Section: Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/lisp/configuration/guide/b_NX- OS_LISP_Configuration_Guide/b_NX-OS_LISP_Configuration_Guide_chapter_010.html
質問 # 104
A network design must include a solution to run CLI commands remotely on Cisco Nexus 9000 Series Switches. The customer's security policy requires secure login credentials and an encrypted underlying transport. The command output will be processed using tools that support XML or JSON encoding. Which two components should be included in the design? (Choose two.)
- A. HTTPS
- B. HTTP
- C. Bash shell
- D. NX-API
- E. SSH
正解：A、E
質問 # 105
A company has several data centers around the world that must be interconnected over Layer2. The service provider supports MPLS services to all the locations. The proposed solution must be vendor agnostic and scalable enough to support the rapid growth of the company. Which data center technology is recommended to achieve this goal?
- A. VXLANEVPN
- B. OTV
- C. FabricPath
- D. EoMPLS
正解：B
質問 # 106
What are two advantages of using Cisco vPC as compared to traditional access layer designs? (Choose two.)
- A. supports Layer 3 port channels
- B. maintains single control plane
- C. uses all available uplink bandwidth
- D. disables spanning-tree
- E. no spanning-tree blocked ports
正解：C、E
質問 # 107
An engineer must design a Cisco UCS environment for a customer The design requires the most efficient use of available bandwidth with active-active uplinks The upstream Cisco Nexus 9000 Series Switch must automatically initiate the port-channel connectivity to the fabric interconnects Which configuration must the engineer choose to meet these requirements?
- A. * fabric interconnects in Ethernet end-host mode
* static port-channel from fabric interconnects and Cisco Nexus 9000 switches - B. * fabric interconnects in Ethernet switching mode
* static port-channel from fabric interconnects and Cisco Nexus 9000 switches - C. * fabric interconnects in Ethernet end-host mode
* LACP port-channel from fabric interconnects and Cisco Nexus 9000 switches - D. * fabric interconnects in Ethernet switching mode
* LACP port-channel from fabric interconnects and Cisco Nexus 9000 switches
正解：C
解説：
Reference:
Cisco UCS Fabric Interconnect in Switch Mode with Cisco MDS 9000 Family Fibre Channel Switching Modules When the Cisco UCS Fabric Interconnect is in switch mode, the port channel mode can only be in ON mode and not Active . However, to get the peer wwn information for the Fabric Interconnect, the port channel must be in Active mode.
質問 # 108
Which Ethernet to Cisco Fabric Interconnect connectivity configuration is supported when FCoE is implemented?
- A. cross-connections with pinning
- B. Ethernet and unified ports on the same port channel
- C. vPC that has unified uplinks
- D. VSS that has unified uplinks
正解：C
質問 # 109
A customer requires a tool to manage Cisco network hardware. The solution must use secure communication using a secure network protocol, support the use of declarative language to manage the state of resources, and periodically pull changes to the controlled nodes. Which tool meets these requirements?
- A. Ansible
- B. Puppet
- C. Nomir
- D. SaltStack
正解：B
質問 # 110
Drag the requirements from the left onto the correct policy types on the right.
正解：
解説：
質問 # 111
A company must integrate an iSCSI storage solution into its existing production environment. The new iSCSI network must be accessible from a limited set of network segments. The client devices follow a strict network security policy to access critical data from the storage array. Which design steps must be used to meet these requirements?
- A. Option D
- B. Option A
- C. Option B
- D. Option C
正解：D
質問 # 112
An engineer Installs a B-Series server in a Cisco UCS chassis that contains a pair of UCS-IOM-2208XP I/O modules. The full bandwidth of the I/O module must be utilized. Which two elements should be used in this environment? (Choose two.)
- A. four twinax cables from each I/O module to each fabric Interconnect
- B. Cisco UCS VIC 1225
- C. Cisco UCS VIC 1280
- D. eight twinax cables from each I/O module to each fabric interconnect
- E. Cisco UCS M81KR
正解：C、D
解説：
2208 has 8 uplinks. VIC 1225 only works on C-Series UCS. M81KR has only 2x10G ports. VIC 1280 has 8x10G ports.
質問 # 113
A network consultant proposes that the configuration of the Cisco UCS servers be based on service templates to facilitate the UCS infrastructure operation. The service profiles must remain connected to the template and be modified when the template settings are changed.
Which configuration meets these requirements?
- A. service profile with type set to Local
- B. service profile template with type set to Initial
- C. service profile template with type set to Updating
- D. service profile with type set to Global
正解：C
質問 # 114
An engineer is designing a disaster recovery solution. In the event of a node failure, the solution should either direct all of the traffic to another node, or load-balance the traffic across the remaining nodes.
Which solution should be implemented in the design?
- A. active/passive
- B. cold standby
- C. active/active
- D. warm standby
正解：C
質問 # 115
What are two advantages of using Cisco vPC over traditional access layer designs? (Choose two.)
- A. supports Layer 3 port channels
- B. maintains single control plane
- C. uses all available uplink bandwidth
- D. disables spanning-tree
- E. no spanning-tree blocked ports
正解：C、E
解説：
Section: Network Design
Explanation/Reference: https://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/sw/design/vpc_design/ vpc_best_practices_design_guide.pdf
質問 # 116
A network engineer is implementing Cisco UCS manager with Cisco UCS center integration. The company is strict security policies require that the logical profile of virtual network adapters and logical addressing assigned to Cisco UCS servers be managed by the Cisco UCS manager. The users must also be prevented from being able to acknowledge pending activities in the Cisco UCS manager. Which two profile must be used to meet these requirements? (Choose two.)
- A. Local power
- B. Global maintenance
- C. Restricted chassis
- D. Local service
- E. Public network control
正解：B、D
解説：
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-central/GUI-User-Guides/Operations/b_UCSC_Ops_Guide/b_UCSC_Ops_Guide_chapter_0111.html#id_16185
質問 # 117
A customer needs a design for a new data center network that meets these requirements:
Logically partition the environment into separate security domains.
Cut costs related to purchasing additional equipment.
Separate routing processes, TCAM, QoS tables, and data planes.
Which technology must be used?
- A. VLAN
- B. vPC
- C. VDC
- D. VRF
正解：C
質問 # 118
An engineer must use OTV for layer 2 connectivity between data centers to support virtual machine between the customer sites. To support this requirement, the engineer must ensure the existence of the same default gateway on both sites. Additionally, the operations team report high bandwidth utilization on site A and wants to optimize the outbound traffic flows to use a DC exit point. Which feature must be used to meet these requirement?
- A. ARP filter
- B. FHRP filter
- C. Control group
- D. Data group
正解：B
解説：
Reference:
質問 # 119
Refer to the exhibit.
What must be the default gateway of the servers in EPG Web?
- A. NAT appliance
- B. subnet address of BD2
- C. subnet address of L3Out
- D. subnet address of BD1
正解：A
質問 # 120
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.
正解：
解説：
質問 # 121
A network design must include a solution to run CLI commands remotely on Cisco Nexus 9000 Series Switches. The customer's security policy requires secure login credentials and an encrypted underlying transport. The command output will be processed rising tools that support XML or JSON encoding.
Which two components should be included in the design? (Choose two.)
- A. SSH
- B. HTTPS
- C. NX-API
- D. HTTP
- E. Bash shell
正解：B、C
解説：
Reference:
Programmability_Configuration_Guide_chapter_0101.html
質問 # 122
Which address pool is used when a vHBA template is created?
- A. MAC
- B. WWPN
- C. IP
- D. UUID
正解：B
質問 # 123
......
無料ダウンロードCisco 300-610リアル試験問題：https://jp.fast2test.com/300-610-premium-file.html
あなたを合格させる試験には100%検証済みの300-610試験問題：https://drive.google.com/open?id=1ZgfMQgRIEBt0fl1SmRaAoOmIdbaWZmkA