合格させる5V0-31.22試験一発合格保証100%カバー率でリアル試験問題 [2023年11月]
有効な5V0-31.22テスト解答VMware 5V0-31.22試験PDF問題を試そう
VMware 5V0-31.22試験は、VMware Cloud Foundationで働くITプロフェッショナルの知識とスキルをテストするために設計されています。この試験は、VMware Cloud Foundationソリューションの展開、構成、および管理の専門知識を実証したい個人を対象としています。この試験に合格すると、VMware製品とソリューションを使用して、安全でスケーラブルで非常に利用可能なクラウドインフラストラクチャを提供する候補者の能力が検証されます。
VMware 5V0-31.22、またはVMware Cloud Foundation Specialist（v2）認定試験は、クラウドコンピューティングおよび仮想化に興味を持つITプロフェッショナルの知識とスキルをテストするために設計された難解かつ包括的な試験です。この試験は、VMware Cloud Foundationおよび関連するテクノロジーの専門知識を証明したい個人にとって、貴重な認定資格です。
質問 # 18
Which service is integrated with VMware Cloud Foundation and enables a centralized and simplified lifecycle management of ESXi host?
- A. vRealize Suite Lifecycle Manager
- B. vCenter Lifecycle Manager
- C. Solutions Manager
- D. vSphere Lifecycle Manager
正解：D
解説：
Explanation
The service that is integrated with VMware Cloud Foundation and enables a centralized and simplified lifecycle management of ESXi host is Option B: vSphere Lifecycle Manager (vLCM) 1.
vLCM enables you to create cluster images for centralized and simplified lifecycle management of ESXi hosts including firmware. When a VI workload domain cluster is created with an image, you can update and upgrade the ESXi version on all hosts in the cluster collectively vSphere Lifecycle Manager (vLCM) is a key component of VMware Cloud Foundation (VCF) that enables centralized and simplified lifecycle management of ESXi hosts. It provides a single interface to manage host baselines, firmware and driver updates, and upgrades. With vLCM, administrators can create custom images for ESXi hosts, define baselines for host compliance, and apply updates to hosts in a coordinated manner. This helps to ensure consistency across the environment and reduce the risk of configuration drift. (source:
VMware Cloud Foundation 4.x Architecture and Deployment Guide)
質問 # 19
A systems administrator has recently added newly-commissioned hosts in the the VI workload domain, and IP addresses are automatically configured to their associated network pool. The administrator reviews which storage options require only vMotion and NFS networks in the network pool.
Which two storage options have this requirement? (Choose two.)
- A. vSAN
- B. vVols on NFS
- C. NFS
- D. Wols on ISCSI
- E. vSAN and NFS
正解：A、C
解説：
Explanation
According to the VMware Cloud Foundation documentation on network requirements, vSAN requires only the vMotion and NFS networks to be configured in the network pool. This is because vSAN traffic can be carried over the vMotion network, and the NFS network is needed to support the use of NFS datastores [1].
NFS is a file-based storage protocol that can be accessed over IP networks. It does not require any special hardware or software, and can be accessed by any device that supports the NFS protocol [2]. As such, it only requires the NFS network to be configured in the network pool.
Therefore, the correct answers are B. NFS and E. vSAN.
質問 # 20
An administrator is tasked with changing the password of the SDDC Manager super user account in a newly installed VCF environment.
Which method must the administrator use to complete this task?
- A. 1 Log in to SDDC manager Ul as a user with the ADMIN role.
2. Go to Administration > Security > Password Management.
3. Select the SDDC Manager account from the component drop-down menu.
4. Click Rotate Now button. - B. 1 SSH in to the SDDC Manager VM using the vcf user account.
2. Switch to the root user
3. Enter the passwd admin command.
4. Enter and retype the new password. - C. 1 SSH in to the SDDC Manager VM using the vcf user account.
2. Switch to the root user.
3. Enter the passwd vcf command.
4. Enter and retype the new password. - D. 1 Log in to the SDDC manager Ul as a user with the ADMIN role
2. Go to Developer Center > API Explorer
3. Expand APIs for managing users.
4. Update password for root user.
正解：A
解説：
Explanation
To change the password of the SDDC Manager super user account, the administrator should follow these steps:
* Log in to the SDDC Manager UI as a user with the ADMIN role.
* Go to Administration > Security > Password Management.
* Select the SDDC Manager account from the component drop-down menu.
* Click Rotate Now button.
This is the recommended method for changing the password of the SDDC Manager super user account, as documented in the VMware Cloud Foundation Administration Guide:https://docs.vmware.com/en/VMware-Cloud-Foundation/index.html
質問 # 21
An administrator has registered an external identity source in a consolidated architecture and would like to make sure that any subsequent workload domains can be accessed using the same identity sources.
How can this goal be achieved with VMware Cloud Foundation?
- A. By keeping the pre-configured defaults
- B. By configuring IWA as an identity source
- C. By replicating vSphere SSO configuration
- D. By configuring LDAPS as an identity source
正解：C
解説：
Explanation
vSphere Single Sign-On (SSO) provides secure authentication and authorization services for VMware Cloud Foundation components, including vCenter Server and Platform Services Controller (PSC). In a consolidated architecture deployment of VMware Cloud Foundation, the vSphere SSO configuration is shared across all the workload domains.
To ensure that subsequent workload domains can use the same identity sources as an external identity source registered in a consolidated architecture, the administrator needs to replicate the vSphere SSO configuration.
This can be achieved by configuring the same identity sources for vSphere SSO across all the workload domains.
Configuring IWA (Integrated Windows Authentication) or LDAPS (Lightweight Directory Access Protocol over SSL) as an identity source is a part of configuring the vSphere SSO configuration for identity sources.
Keeping the pre-configured defaults does not guarantee that the subsequent workload domains will use the same identity sources as the external identity source registered in a consolidated architecture.
References:
* VMware Cloud Foundation Operations and Administration
Guide:https://docs.vmware.com/en/VMware-Cloud-Foundation/index.html
* VMware vSphere Security
Guide:https://docs.vmware.com/en/VMware-vSphere/7.0/vsphere-security-guide.pdf
* To ensure that any subsequent workload domains can be accessed using the same identity sources, it is necessary to replicate the vSphere SSO configuration across all the workload domains in a consolidated architecture deployment. This can be achieved by replicating the vSphere SSO configuration between the primary and additional SDDC Manager instances. This ensures that all the workload domains registered with the SDDC Manager will be able to consume resources and services from the same identity sources without any additional configuration in each individual workload domain.
質問 # 22
Which component is upgraded when using the SDDC Manager management domain upgrade workflow in VMware Cloud Foundation?
- A. VMware vRealize Network Insight
- B. Workload Domain vCenter Server
- C. VMware Cloud Builder
- D. VMware NSX-T Manager nodes
正解：C
解説：
Explanation
This is because according to VMware documentation1, the VMware Cloud Foundation Upgrade bundle upgrades the SDDC Manager appliance and Lifecycle Management, which are components of VMware Cloud Builder.
質問 # 23
Which statement is true regarding NSX Manager configuration in a VMware Cloud Foundation environment?
- A. NSX Managers can be deployed to different VLANs.
- B. Traffic is load-balanced across all NSX Managers while using the virtual IP address.
- C. The cluster virtual IP address is attached to all NSX Managers.
- D. The cluster virtual IP address is used for API and GUI access to NSX Managers.
正解：D
解説：
Explanation
According to VMware Cloud Foundation Planning and Preparation Workbook, a statement that is true regarding NSX Manager configuration in a VMware Cloud Foundation environment is:
* The cluster virtual IP address (VIP) address must be used for API and GUI access to NSX Managers
質問 # 24
Which license is required to enable Workload Management on VMware Cloud Foundation?
- A. VMware vSphere Evaluation
- B. VMware Tanzu Basic
- C. VMware vSphere Standard
- D. VMware vSphere Enterprise Plus
正解：B
解説：
Explanation
A Tanzu Basic license is required to enable Workload Management on VMware Cloud Foundation. Once enabled, the Supervisor Cluster must be assigned a Tanzu license before the 60-day evaluation period expires.
This license can be added to the license inventory of vSphere if a valid Tanzu Edition license is available.
質問 # 25
Which two roles are played by a Spherelet in a Tanzu-enabled VCF workload domain? (Choose two.)
- A. It enables an ESXi hypervisor to act as a Kubernetes worker node.
- B. It runs as a VIB on all Supervisor Cluster ESXi hosts configured with the vSphere Networking Stack.
- C. It enables an ESXi hypervisor to act as a Kubernetes master node.
- D. It starts and monitors vSphere pods running on the workload domain cluster
- E. It communicates with the vSphere with Tanzu embedded Harbor registry.
正解：A、C
解説：
Explanation
According to vSphere with Tanzu Architecture1, a Spherelet is a component that runs as a VIB on all Supervisor Cluster ESXi hosts configured with the vSphere Networking Stack. It enables an ESXi hypervisor to act as a Kubernetes master node or a Kubernetes worker node, depending on the role assigned by the Supervisor Cluster control plane.
質問 # 26
A VMware Cloud Foundation (VCF) architect is presented with a customer's requirements for an architecture that needs to achieve:
* Network high availability across workloads in two data center locations.
* Maintain the least administrative overhead when performing day 2 operations.
* Decrease the RTO of both management plane and data plane when site-wide failure occurs Which VCF design consideration should the architect recommend?
- A. VCF with NSX-T Bridging
- B. VCF with NSX-T Multi-Site
- C. VCF with NSX-T Federation
- D. VCF with NSX-T L2-VPN
正解：C
解説：
Explanation
According to VMware Cloud Foundation Architecture Poster, VCF with NSX-T Federation provides network high availability across workloads in two data center locations bysynchronizing network configuration and state across sites. It also simplifies day 2 operations by providing centralized management and policy enforcement across sites. It also reduces RTO by enabling fast failover of network services between sites.
質問 # 27
A customer purchased six new HPE ProLiant DL380 Gen10 hosts and is interested in deploying a VCF infrastructure that will coexist with the current VMware on AWS cloud DR solution in a hybrid model.
The architect suggests the VCF architecture that will help the customer run the workloads while offering workload isolation.
Which VCF architecture was suggested for this customer?
- A. 3-node management domain and 3-node VI workload domain in a VCF standard model
- B. node management/workload domain in a VCF consolidated model, while leveraging resource pools
- C. node management domain and 3-node VI workload domain in a VCF standard model, while leveraging resource pools
- D. node management/workload domain in a VCF consolidated model
正解：A
解説：
Explanation
This is because according to VMware documentation , VCF supports two architecture models - standard and consolidated. The standard architecture model separates management workloads and user workloads into different domains, while the consolidated architecture model combines them into one domain. For a hybrid model that coexists with VMware on AWS cloud DR solution, the standard architecture model is recommended as it provides workload isolation and mobility across VCF instances6. The minimum requirement for creating a management domain or a VI workload domain is three hosts45.
質問 # 28
A VMware architect has been asked to design a VMware Cloud Foundation solution for an online gaming company. The Chief Information Officer (CIO) of the company has asked the architect to focus on these requirements:
* The environment should be optimized for maximum hardware utilization.
* The environment should be highly available.
Which method meets these requirements and is supported for vCenter Server with VMware Cloud Foundation?
- A. vCenter HA
- B. Storage level snapshots
- C. vSphere HA
- D. vSphere FT
正解：A
解説：
Explanation
This is because according to VMware documentation, this is one of the methods that meets these requirements and is supported for vCenter Server with VMware Cloud Foundation. vCenter HA provides high availability by creating an active-passive cluster of three vCenter Server nodes (one active, one passive, one witness). It also optimizes hardware utilization by allowing resource sharing among different workload domains through Enhanced Linked Mode (ELM).
質問 # 29
What is required as part of enabling the Harbor Image Registry?
- A. Access Control
- B. Resource Limits
- C. Tanzu Enabled Cluster
- D. Storage Policy
正解：D
解説：
Explanation
This is because according to Dell documentation , to enable the Harbor Image Registry, you need to select the VM Storage Policy that will be used to store the images.
As part of enabling the Harbor Image Registry in VMware Cloud Foundation, a storage policy needs to be defined to specify the storage requirements for the registry. The storage policy should define the storage characteristics for the datastores where the registry will be deployed, including the redundancy level, disk type, and disk space. This is documented in the VMware documentation titled "Enabling Harbor Image Registry in Workload Domains."
質問 # 30
Which two features are supported when implementing NSX Federation? (Choose two.)
- A. Identity Firewall
- B. NAT operations
- C. Load Balancer
- D. DHCP
- E. DHCP dynamic binding
正解：B、C
解説：
Explanation
This is because according to VMware documentation , these are some of the features that are supported when implementing NSX Federation:
* NAT operations: You can configure NAT rules for Tier-0 gateways across locations.
* Load Balancer: You can configure load balancer services for Tier-0 gateways across locations.
質問 # 31
An architect is designing overlay networking and routing for two VMware Cloud Foundation VI workload domains The following requirements must be met in the design:
* NSX-T Bare Metal Edge nodes are required to satisfy a requirement for extremely low latency.
* The costs must be kept to a minimum.
Which design meets these customer requirements?
- A. Share an NSX-T Manager cluster between both workload domains, and then add the NSX-T Bare Metal Edge cluster to the shared NSX-T Manager cluster.
- B. Place the Bare Metal Edge nodes in the same rack as the management domain hosts, and then add the NSX-T Bare Metal Edge cluster to the management domain NSX-T Manager cluster.
- C. Create separate NSX-T Manager clusters for each workload domain, and then create separate NSX-T Bare Metal Edge clusters for each workload domain.
- D. Create separate NSX-T Manager clusters for each workload domain, and then create a single NSX-T Bare Metal Edge cluster to be shared between NSX-T Manager clusters.
正解：A
解説：
Explanation
This is because according to VMware documentation, this is one of the supported design options for deploying NSX-T Bare Metal Edge nodes for VMware Cloud Foundation VI workload domains. Sharing an NSX-T Manager cluster between both workload domains can reduce costs by minimizing the number of NSX-T licenses required. Adding the NSX-T Bare Metal Edge cluster to the shared NSX-T Manager cluster can satisfy a requirement for extremely low latency by providing direct access to physical network interfaces.
質問 # 32
What limits can an administrator configure on a vSphere Namespace for a VMware Cloud Foundation Developer-Ready Workload Domain?
- A. Persistent Volumes
- B. Tanzu Kubemetes Cluster master nodes
- C. Tanzu Kubernetes Cluster worker nodes
- D. Secrets
正解：A、D
解説：
Explanation
This is because according to VMware documentation1, these are two of the limits that an administrator can configure on a vSphere Namespace for a VMware Cloud Foundation Developer-Ready Workload Domain. Secrets are used to store sensitive information such as passwords or tokens for Kubernetes workloads
2. Persistent Volumes are used to provide persistent storage for Kubernetes workloads3.
質問 # 33
A developer is deploying pods with Persistent Volumes (PV) on vSphere with Tanzu. Which component determines the datastore that the PV will be placed on?
- A. Hostd
- B. CNS-CSI
- C. SPBM
- D. Spherelet
正解：C
解説：
Explanation
This is because according to VMware documentation34, vSphere with Tanzu uses storage policies to integrate with shared datastores available in your environment, including VMFS, NFS, vSAN, or vVols datastores. The storage policies represent datastores and manage the storage placement of such objects as persistent volumes (PVs). Storage Policy Based Management (SPBM) is a framework that provides a single unified control plane across different types of datastores and enables administrators to define policies based on storage capabilities and requirements5.
質問 # 34
A VCF architect collected the following requirements when designing the expansion of a new VI Workload Domain with twenty four vSAN Ready nodes, each with a dual-port 25Gbps network interface card:
* Provide scalable high-performance networking with layer-3 termination at top-of-rack
* Protect workloads from switch/NIC/rack failure
* Provide isolation for DMZ workloads
* Provide at-least 25Gbps dedicated bandwidth to backup traffic
* Easily accept workloads on traditional VLAN-backed networks
* Fully-supported by VMware
Which three design considerations meet all of these requirements? (Choose three.)
- A. Core Aggregation network topology
- B. Spine and Leaf network topology with layer-3 at top of rack
- C. Spine and Leaf network topology with layer-3 at Spine
- D. Two-node Edge Cluster with ECMP
- E. Stretched Clustering
- F. Two-node Edge Cluster with BFD
正解：A、B、C
解説：
Explanation
Option B: Spine and Leaf network topology with layer-3 at Spine - A spine and leaf network topology is designed for high scalability and performance, and layer-3 at the spine ensures that there is no single point of failure for the layer-3 termination. This meets several of the requirements, including scalable high-performance networking with layer-3 termination at top-of-rack, protecting workloads from switch/NIC/rack failure, and providing isolation for DMZ workloads.
Option D: Spine and Leaf network topology with layer-3 at top of rack - Similar to Option B, this topology also provides high scalability and performance, and layer-3 at the top of rack meets the requirement for layer-3 termination at top-of-rack.
Option F: Core Aggregation network topology - This topology provides a highly available, redundant core switch for aggregation and routing, which meets the requirement for protecting workloads from switch/NIC/rack failure.
Based on the given choices, the correct answers would be B, D, and F.
Sources: [1] Designing VMware Infrastructure Topology and Architecture; Authors: Russel Nolan, Eiad Al-Aqqad [2] Network Topology Considerations for VMware vSAN;https://docs.vmware.com/en/VMware-vSAN/7.0/com.vmware.vsan.networking.doc/GUID-1A901C10-48 Spine-Leaf Architecture:
Introduction;https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/datasheet-c
質問 # 35
An architect is designing networking for a developer-ready infrastructure on VMware Cloud Foundation.
During the discussion with the network team, a question comes up about the use of a routable CIDR range.
Which item uses this type of range?
- A. Ingress
- B. vSphere Pod
- C. ClusterIP
- D. Kubernetes services
正解：A
解説：
Explanation
This is because an ingress is a Kubernetes resource that exposes HTTP and HTTPS routes from outside the cluster to services within the cluster1. An ingress can use a routable CIDR range to assign IP addresses to the ingress controllers that handle the traffic routing.
質問 # 36
Which order of steps should an administrator use to replace a failed host in a stretched cluster?
- A. Decommission the failed host.
2. Remove the host using cluster APIs.
3. Add the newly commissioned host to the cluster using cluster APIs. 4 Commission the new host with the correct network. - B. 1 Remove the host using cluster APIs.
2. Decommission the failed host.
3. Commission the new host with the correct network.
4. Add the newly commissioned host to the cluster using cluster APIs. - C. Remove the host using cluster APIs
2. Decommission the failed host.
3. Add the newly commissioned host to the cluster using cluster APIs.
4. Commission the new host with the correct network - D. 1 Decommission the failed host
2. Remove the host using cluster APIs.
3. Commission the new host with the correct network.
4. Add the newly commissioned host to the cluster using cluster APIs.
正解：A
解説：
Explanation
This is because according to VMware documentation1, these are the steps to replace a failed host in a stretched cluster:
* Run the compact cluster API to remove any stale data from vSAN.
* Decommission the host to be removed using SDDC Manager UI or API.
* Commission the replacement host to the same network pool as the removed host using SDDC Manager UI or API.
* Add the newly commissioned host to the cluster using SDDC Manager UI or API.
* Explanation: According to the VMware documentation, when replacing a failed host in a stretched cluster, the first step is to decommission the failed host. This should be followed by removing the host using cluster APIs, commissioning the new host with the correct network, and then adding the newly commissioned host to the cluster using cluster APIs.
質問 # 37
Which three components are required to deploy a stretched cluster in a VMware Cloud Foundation environment? (Choose three.)
- A. DHCP on the host overlay network
- B. vSAN, host overlay and vMotion network stretched across both sites
- C. One witness host per site
- D. DHCP on the NSX Edge overlay network
- E. vSAN: host overlay and vMotion network per data site
- F. One witness host per vSAN stretched cluster
正解：A、B、F
解説：
Explanation
This is because when deploying a stretched cluster in a VMware Cloud Foundation environment, you must ensure that:
* The vSAN network, the host overlay network and the vMotion network are stretched across both availability zones12. These networks enable data replication, communication and migration between hosts in different sites.
* The host overlay network has DHCP enabled to provide IP addresses to hosts1. This simplifies the configuration and management of hosts in different sites.
* Each vSAN stretched cluster has one witness host deployed in a separate location from both availability zones12. The witness host acts as a tie-breaker in case of a site failure or split-brain scenario.
https://docs.vmware.com/en/VMware-Cloud-Foundation/4.5/vcf-admin/GUID-7B4CC729-20BD-4CC9-B855-B
質問 # 38
......
VMware 5V0-31.22認定試験は、VMware Cloud Foundationスペシャリスト（V2）認定を取得するための不可欠なステップです。この試験は、VMware Cloud Foundationソリューションを設計、実装、および管理する候補者の能力を包括的に評価しています。この認定は、IT業界で高く評価されており、それを保持している専門家に競争力を提供します。
5V0-31.22試験問題にて有効な5V0-31.22問題集PDF：https://jp.fast2test.com/5V0-31.22-premium-file.html
検証済み5V0-31.22問題集と解答で合格保証：https://drive.google.com/open?id=1Ki5UOuDEpHXUI-GXk0T3sjAGNshOy062