信頼できるVMware Certified Specialist 5V0-31.22問題集PDF 2024年08月05日最近更新された問題
必ず合格できるVMware 5V0-31.22試験正確な118問題と解答あります
質問 # 29
An administrator is tasked with enabling workload management for a VMware Cloud Foundation Management Workload Domain. This set of requirements was collected during the design workshops:
* Developers should be able to utilize vSphere Pods feature.
* Embedded harbor registry feature should be supported.
* Developers need to utilize persistent volumes across multiple provisioned vSphere Pods.
Which three actions will meet the requirements for this deployment? (Choose three.)
- A. Enable vSAN File Services.
- B. Configure HA Proxy.
- C. Enable vSphere HA and DRS in partially-automated mode.
- D. Configure NSX Advanced Load Balancer.
- E. Enable vSphere HA and DRS in fully-automated mode
- F. Configure NSX-T Networking.
正解：A、E、F
解説：
This is because according to VMware documentation2, these are some of the prerequisites for enabling workload management for a VMware Cloud Foundation Management Workload Domain:
You must have a vSphere cluster with NSX-T networking configured.
You must have vSAN File Services enabled on your cluster.
You must have vSphere HA and DRS enabled in fully automated mode on your cluster.
The other options are incorrect because they are not required or supported for this deployment.
https://docs.vmware.com/en/VMware-Harbor-Registry/services/vmware-harbor-registry/GUID-index.html
質問 # 30
An administrator is tasked with deploying a VMware Cloud Foundation environment that consists of three VI Workload Domains. Each VI Workload Domain is comprised of two clusters, with 18 hosts in each cluster.
Which option fulfills this requirement while minimizing the number of NSX-T Manager instances?
- A. Deploy one medium-sized NSX-T Manager cluster for all VI Workload Domains.
- B. Deploy one medium-sized NSX-T Manager cluster per VI Workload Domain
- C. Deploy one large-sized NSX-T Manager cluster per VI Workload Domain.
- D. Deploy one large-sized NSX-T Manager cluster for all VI Workload Domains.
正解：A
解説：
According to NSX Manager VM and Host Transport Node System Requirements23, an NSX-T management cluster formed using a medium-sized appliance can support up to 128 hypervisors. Since each VI Workload Domain has 36 hosts (18 x 2), and there are three VI Workload Domains, the total number of hosts is 108 (36 x 3), which is within the limit of a medium-sized NSX-T Manager cluster.
質問 # 31
What limits can an administrator configure on a vSphere Namespace for a VMware Cloud Foundation Developer-Ready Workload Domain?
- A. Tanzu Kubernetes Cluster worker nodes
- B. Persistent Volumes
- C. Tanzu Kubemetes Cluster master nodes
- D. Secrets
正解：B、D
解説：
Explanation
This is because according to VMware documentation1, these are two of the limits that an administrator can configure on a vSphere Namespace for a VMware Cloud Foundation Developer-Ready Workload Domain. Secrets are used to store sensitive information such as passwords or tokens for Kubernetes workloads
2. Persistent Volumes are used to provide persistent storage for Kubernetes workloads3.
質問 # 32
A VCF administrator is preparing to configure scheduled backups for the SDDC Manager. What must the administrator register as an external component to complete this task?
- A. SFTP server
- B. SMB server
- C. NFS server
- D. iSCSI server
正解：A
解説：
Explanation
This is because according to VMware documentation, this is what an administrator must register as an external component to complete this task of configuring scheduled backups for the SDDC Manager. SFTP server is one of the supported backup targets for SDDC Manager backups. The administrator can register an SFTP server by navigating to the SDDC Manager UI > Administration > Backup > Site Settings and clicking Register External.
質問 # 33
A VMware Cloud Foundation administrator is required to enable Workload Management (vSphere with Tanzu) on an existing workload domain cluster, which is currently licensed with a vSphere Enterprise Plus license.
Which action, if any, is required to complete this task?
- A. Add a license for vSphere with Tanzu with sufficient CPU capacity to the SDDC Manager inventory, and then assign the license to the cluster in SDDC Manager
- B. Add a license for vSphere with Tanzu with sufficient CPU capacity to both the SDDC Manager and vCenter Server, and then assign the license to the cluster in vCenter Server
- C. No action is required since the vSphere Enterprise Plus license supports vSphere with Tanzu.
- D. No action is required since SDDC Manager licenses include an entitlement for vSphere with Tanzu.
正解：A
解説：
Explanation
https://docs.vmware.com/en/VMware-vSphere/7.0/vmware-vsphere-with-tanzu/GUID-9A190942-BDB1-4A19-B To enable Workload Management (vSphere with Tanzu) on an existing workload domain cluster, a license for vSphere with Tanzu with sufficient CPU capacity must be added to the SDDC Manager inventory, and then assigned to the cluster in SDDC Manager. This is because vSphere Enterprise Plus license does not include an entitlement for vSphere with Tanzu. Therefore, Option B and Option C are incorrect. Option D is also incorrect since adding the license to both the SDDC Manager and vCenter Server is not necessary to enable Workload Management.
質問 # 34
An administrator wants to delete a VMware Cloud Foundation Workload Domain and re-use the attached ESXi hosts by returning them to the list of unassigned hosts in the SDDC Manager inventory.
Which action needs to be taken to complete this task?
- A. ESXi hosts need to be re-imaged and rejoined.
- B. ESXi hosts need to be decommissioned and re-imaged.
- C. ESXi hosts need to be re-imaged and updated.
- D. ESXi hosts need to be decommissioned and updated
正解：B
解説：
Explanation
This is because according to VMware documentation, this is the procedure for deleting a VMware Cloud Foundation Workload Domain and re-using its ESXi hosts:
* Decommission all ESXi hosts in a cluster
* Delete all clusters in a workload domain
* Delete workload domain
* Re-image ESXi hosts using SDDC Manager
質問 # 35
A systems administrator is implementing stretched clusters in an environment with multiple Availability Zones (AZs). Which statement accurately describes this design?
- A. The Layer 3 gateway for the workload domain and Edge overlay networks must be highly available across the AZs.
- B. For VLANs that are stretched between AZs, configure load balancing in the Layer 3 gateway between AZs
- C. If VLAN is stretched between AZ1 and AZ2, the Layer 3 network must also be stretched between the two AZs.
- D. Layer 3 networks must be stretched between the AZs by the physical infrastructure
正解：B
解説：
Explanation
This is because according to VMware documentation, this is one of the design considerations for implementing stretched clusters in an environment with multiple Availability Zones (AZs). Load balancing in the Layer 3 gateway between AZs can improve network performance and availability by distributing traffic across multiple paths.
質問 # 36
A VCF architect collected the following requirements when designing the expansion of a new VI Workload Domain with twenty four vSAN Ready nodes, each with a dual-port 25Gbps network interface card:
* Provide scalable high-performance networking with layer-3 termination at top-of-rack
* Protect workloads from switch/NIC/rack failure
* Provide isolation for DMZ workloads
* Provide at-least 25Gbps dedicated bandwidth to backup traffic
* Easily accept workloads on traditional VLAN-backed networks
* Fully-supported by VMware
Which three design considerations meet all of these requirements? (Choose three.)
- A. Spine and Leaf network topology with layer-3 at top of rack
- B. Core Aggregation network topology
- C. Two-node Edge Cluster with ECMP
- D. Stretched Clustering
- E. Two-node Edge Cluster with BFD
- F. Spine and Leaf network topology with layer-3 at Spine
正解：A、C、E
質問 # 37
A systems administrator is tasked to deploy VMware Cloud Foundation (VCF) and has already deployed the VMware Cloud Builder appliance.
What is the next step the systems administrator should take?
- A. Prepare and configure the ESXi hosts to be used in the deployment.
- B. Deploy the Management Domain using VMware Cloud Builder.
- C. Configure the Management Domain using custom certificates.
- D. Upload the Deployment Parameter Workbook.
正解：D
解説：
Explanation
after deploying the VMware Cloud Builder appliance, the next step a systems administrator should take when deploying VMware Cloud Foundation (VCF) is Option D: Upload the Deployment Parameter Workbook 1
. After uploading and validating the deployment parameter workbook, you can perform bring-up of the management domain 1.
According to the VMware Cloud Foundation documentation, after deploying the VMware Cloud Builder appliance, the next step is to create a deployment parameter workbook that defines the parameters required for the deployment. This workbook can be created manually or generated using the VMware Cloud Foundation Deployment Parameter Workbook Generator tool. Oncethe workbook is created, it must be uploaded to the VMware Cloud Builder appliance before deploying the Management Domain [1].
Therefore, the correct sequence of steps would be:
* Deploy the VMware Cloud Builder appliance
* Create or generate the Deployment Parameter Workbook
* Upload the Deployment Parameter Workbook to the VMware Cloud Builder appliance
* Deploy the Management Domain using VMware Cloud Builder.
質問 # 38
What is a supported function of the vSphere Lifecycle Manager (LCM) in VMware Cloud Foundation (VCF)?
- A. Upgrade vCenter Server
- B. Downgrade VM hardware version
- C. Upgrade SDDC Manager
- D. Check hardware compatibility of hosts and clusters
正解：A
解説：
Explanation
The VMware Cloud Foundation Specialist (v2) certification exam guide from VMware specifically mentions that "Upgrade vCenter Server to a new version using vSphere Lifecycle Manager (vLCM)" is a key knowledge area for the exam (source[1][2]:https://www.vmware.com/education-services/certification/vcf-specialist-exam.html).
Additionally, search result [1] mentions that SDDC Manager is responsible for the life cycle management of vCenter Server and other components[3], indicating that vSphere LCM is specifically responsible for upgrading vCenter Server, a supported function.
a supported function of vSphere Lifecycle Manager (LCM) in VMware Cloud Foundation (VCF) is Option A:
Upgrade vCenter Server 1. vSphere Lifecycle Manager provides a framework for desired state lifecycle management of vSphere hosts in a cluster 2.
https://docs.vmware.com/en/VMware-vSphere/8.0/vsphere-lifecycle-manager/GUID-F0635413-D52A-4115-A7
質問 # 39
A systems administrator is tasked to deploy a management domain during VMware Cloud Foundation Bring-Up process. What are the minimum hardware requirements for the management cluster?
- A. 4 vSAN Ready Nodes, 192 GB RAM per server, and 2 10GbE NICs
- B. 2 vSAN Ready Nodes, 192 GB RAM per server, and 4 10GbE NICs
- C. 8 vSAN Ready Nodes, 256 GB RAM per server, and 2 10GbE NICs
- D. 6 vSAN Ready Nodes, 256 GB RAM per server, and 4 10GbE NICs
正解：A
解説：
Explanation
The minimum hardware requirements for the management cluster during VMware Cloud Foundation Bring-Up process are:
* 4 vSAN Ready Nodes
* 192 GB RAM per server
* 2 10GbE NICs
質問 # 40
A customer would like to use VCF in two new regional data centers, and they have a hard requirement to stretch layer 2 networks across the two sites. Both sites have a 130ms latency.
What would be the ideal solution?
- A. VCD with NSX-T IPSEC
- B. VCF with NSX-T Bridging
- C. VCF with NSX-T Multi-Site
- D. VCF with NSX-T Federation
正解：D
解説：
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.2/administration/GUID-F3A0A27E-88C0-4A64-8754-33CED93985D3.html
質問 # 41
Which two roles are played by a Spherelet in a Tanzu-enabled VCF workload domain? (Choose two.)
- A. It runs as a VIB on all Supervisor Cluster ESXi hosts configured with the vSphere Networking Stack.
- B. It enables an ESXi hypervisor to act as a Kubernetes master node.
- C. It communicates with the vSphere with Tanzu embedded Harbor registry.
- D. It enables an ESXi hypervisor to act as a Kubernetes worker node.
- E. It starts and monitors vSphere pods running on the workload domain cluster
正解：B、D
解説：
According to vSphere with Tanzu Architecture1, a Spherelet is a component that runs as a VIB on all Supervisor Cluster ESXi hosts configured with the vSphere Networking Stack. It enables an ESXi hypervisor to act as a Kubernetes master node or a Kubernetes worker node, depending on the role assigned by the Supervisor Cluster control plane.
質問 # 42
An architect needs to enable the workload management for a VCF VI workload domain and plans on using the minimum requirement for deploying a highly available NSX edge cluster.
What is the minimum requirement for this deployment?
- A. A cluster of one large NSX edge node
- B. A cluster of two small NSX edge nodes
- C. A cluster of three large NSX edge node
- D. A cluster of two large NSX edge nodes
正解：D
解説：
This is because according to VMware documentation1, a VI workload domain consists of one or more vSphere clusters that run customer workloads. To enable workload management for a VI workload domain, you need to have an NSX-T edge cluster that provides north-south connectivity and load balancing for Kubernetes clusters2. The minimum requirement for creating an NSX-T edge cluster is two edge nodes34. The size of the edge nodes depends on the throughput and features required, but for high availability, large size is recommended5.
https://docs.vmware.com/en/VMware-Cloud-Foundation/4.5/vcf-getting-started/GUID-C68FD810-D270-43F2-AEBF-D522BA1F402B.html
質問 # 43
During the design phase for a greenfield VMware Cloud Foundation (VCF) deployment, the following design decisions have been agreed upon:
* Stretched Cluster needs to be deployed
* Identity and Access Management for VMware Cloud Foundation needs to be deployed The Infrastructure Architect is working with the client to fill the Planning and Preparation Workbook. The Option for Stretched Cluster has been set to 'Include'. The 'Identity and Access Management' is displaying an error, and its Final Result is stating *Excluded'.
Which option should be enabled in the Planning and Preparation Workbook to address the issue?
- A. Clustered Workspace One Access
- B. Apply Signed Certificates
- C. NSX Routing for Management Domain
- D. Consolidated Management Domain
正解：C
解説：
Explanation
According to About Identity and Access Management for VMware Cloud Foundation23, one of the prerequisites for deploying Identity and Access Management for VMware Cloud Foundation is to enable NSX Routing for Management Domain in SDDC Manager. This allows SDDC Manager to communicate with Active Directory servers across different networks.
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.vsan-planning.doc/GUID-AFF133BC-F
質問 # 44
A systems administrator has recently added newly-commissioned hosts in the the VI workload domain, and IP addresses are automatically configured to their associated network pool. The administrator reviews which storage options require only vMotion and NFS networks in the network pool.
Which two storage options have this requirement? (Choose two.)
- A. vSAN and NFS
- B. NFS
- C. vSAN
- D. Wols on ISCSI
- E. vVols on NFS
正解：B、C
解説：
According to the VMware Cloud Foundation documentation on network requirements, vSAN requires only the vMotion and NFS networks to be configured in the network pool. This is because vSAN traffic can be carried over the vMotion network, and the NFS network is needed to support the use of NFS datastores [1].
NFS is a file-based storage protocol that can be accessed over IP networks. It does not require any special hardware or software, and can be accessed by any device that supports the NFS protocol [2]. As such, it only requires the NFS network to be configured in the network pool.
Therefore, the correct answers are B. NFS and E. vSAN.
質問 # 45
An architect is designing networking for a developer-ready infrastructure on VMware Cloud Foundation. During the discussion with the network team, a question comes up about the use of a routable CIDR range.
Which item uses this type of range?
- A. Ingress
- B. ClusterIP
- C. Kubernetes services
- D. vSphere Pod
正解：A
解説：
This is because an ingress is a Kubernetes resource that exposes HTTP and HTTPS routes from outside the cluster to services within the cluster1. An ingress can use a routable CIDR range to assign IP addresses to the ingress controllers that handle the traffic routing.
https://docs.vmware.com/en/VMware-Cloud-Foundation/services/vcf-developer-ready-infrastructure-v1/GUID-AF178A31-D09A-4265-89FD-5987D1B36757.html
質問 # 46
What is a valid procedure to replace an expired vSAN license in a VMware Cloud Foundation environment?
- A. 1 Add a new vSAN license to the SDDC Manager.
2. Reassign the vSAN license to the cluster in the SDDC Manager.
3. Remove the expired vSAN license from the SDDC Manager - B. 1 Add a new vSAN license to the SDDC Manager and vCenter Server.
2. Reassign the vSAN license to the cluster in the vCenter Server.
3. Remove the expired vSAN license from the SDDC Manager and vCenter Server. - C. 1 Add a new vSAN license to the vCenter Server.
2. Connect to SDDC Manager via SSH, and then restart Lifecycle Management using systemctl restart Icm.
3. Verify in the vCenter Server whether a new vSAN license has been assigned to the cluster. - D. 1 Add a new vSAN license to the SDDC Manager.
2. Connect to SDDC Manager via SSH, and then restart Domain Manager using systemctl restart domainmanager. 3 Verify in the SDDC Manager whether a new vSAN license has been assigned to the cluster.
正解：B
解説：
A). You can add a new vSAN license to both the SDDC Manager and vCenter Server.
Then reassign the vSAN license to the cluster in the vCenter Server 1. Finally, remove the expired vSAN license from both SDDC Manager and vCenter Server 2.
https://my-cloudy-world.com/2022/06/28/updating-a-vsan-license-in-vmware-cloud-foundation/
Explanation:
a valid procedure to replace an expired vSAN license in a VMware Cloud Foundation environment is Option
質問 # 47
A systems administrator is tasked to deploy a management domain during VMware Cloud Foundation Bring-Up process. What are the minimum hardware requirements for the management cluster?
- A. 4 vSAN Ready Nodes, 192 GB RAM per server, and 2 10GbE NICs
- B. 2 vSAN Ready Nodes, 192 GB RAM per server, and 4 10GbE NICs
- C. 8 vSAN Ready Nodes, 256 GB RAM per server, and 2 10GbE NICs
- D. 6 vSAN Ready Nodes, 256 GB RAM per server, and 4 10GbE NICs
正解：A
解説：
The minimum hardware requirements for the management cluster during VMware Cloud Foundation Bring-Up process are:
4 vSAN Ready Nodes
192 GB RAM per server
2 10GbE NICs
Reference:
https://docs.vmware.com/en/VMware-Cloud-Foundation/4.2/vcf-42-getting-started/GUID-0A0D7E16-C4D8-4B05-8C23-F7F2FF12DE64.html
質問 # 48
Which component is upgraded when using the SDDC Manager management domain upgrade workflow in VMware Cloud Foundation?
- A. VMware Cloud Builder
- B. VMware NSX-T Manager nodes
- C. VMware vRealize Network Insight
- D. Workload Domain vCenter Server
正解：A
解説：
Explanation
This is because according to VMware documentation1, the VMware Cloud Foundation Upgrade bundle upgrades the SDDC Manager appliance and Lifecycle Management, which are components of VMware Cloud Builder.
質問 # 49
A systems administrator is tasked with creating a new VI workload domain that will leverage either an external NFS or a VMFS on FC storage as the principal storage.
Which action is required to fulfill this requirement?
- A. Create a new network pool only for vMotion network.
- B. Create a new network pool for vMotion and vSAN networks.
- C. Create a new network pool for vMotion and NFS networks.
- D. Create a new network pool for vMotion, vSAN, and NFS networks.
正解：C
解説：
Explanation
This is because a network pool is a collection of subnets within an layer-2 network domain that includes information about subnets reserved for the vMotion and NFS networks that are required for adding a host to the SDDC Manager inventory2. The other options are not correct because they either include vSAN network, which is not needed for external NFS or VMFS on FC storage , or they do not include NFS network, which is needed for external NFS storage1
https://infohub.delltechnologies.com/l/dell-storage-with-vmware-cloud-foundation-1/vmware-cloud-foundation-n
質問 # 50
Which two health checks can be performed using the SoS tool? (Choose two.)
- A. -esxi-health
- B. -system-check
- C. -password-health
- D. -credential-health
- E. -health-check
正解：D、E
解説：
Explanation
According to Using the SoS Utility on VMware Cloud Builder2 and Validate the SDDC Manager State3, two of the health checks that can be performed using the SoS tool are:
* -credential-health: This option checks whether all credentials stored in SDDC Manager are valid and can be used to access various components or services.
* -health-check: This option checks whether all components or services managed by SDDC Manager are healthy and running properly.
質問 # 51
Which service is integrated with VMware Cloud Foundation and enables a centralized and simplified lifecycle management of ESXi host?
- A. Solutions Manager
- B. vCenter Lifecycle Manager
- C. vSphere Lifecycle Manager
- D. vRealize Suite Lifecycle Manager
正解：C
解説：
Explanation
The service that is integrated with VMware Cloud Foundation and enables a centralized and simplified lifecycle management of ESXi host is Option B: vSphere Lifecycle Manager (vLCM) 1.
vLCM enables you to create cluster images for centralized and simplified lifecycle management of ESXi hosts including firmware. When a VI workload domain cluster is created with an image, you can update and upgrade the ESXi version on all hosts in the cluster collectively vSphere Lifecycle Manager (vLCM) is a key component of VMware Cloud Foundation (VCF) that enables centralized and simplified lifecycle management of ESXi hosts. It provides a single interface to manage host baselines, firmware and driver updates, and upgrades. With vLCM, administrators can create custom images for ESXi hosts, define baselines for host compliance, and apply updates to hosts in a coordinated manner. This helps to ensure consistency across the environment and reduce the risk of configuration drift. (source:
VMware Cloud Foundation 4.x Architecture and Deployment Guide)
質問 # 52
During the design phase for a greenfield VMware Cloud Foundation (VCF) deployment, the following design decisions have been agreed upon:
* Stretched Cluster needs to be deployed
* Identity and Access Management for VMware Cloud Foundation needs to be deployed The Infrastructure Architect is working with the client to fill the Planning and Preparation Workbook. The Option for Stretched Cluster has been set to 'Include'. The 'Identity and Access Management' is displaying an error, and its Final Result is stating *Excluded'.
Which option should be enabled in the Planning and Preparation Workbook to address the issue?
- A. Clustered Workspace One Access
- B. Apply Signed Certificates
- C. NSX Routing for Management Domain
- D. Consolidated Management Domain
正解：C
解説：
According to About Identity and Access Management for VMware Cloud Foundation23, one of the prerequisites for deploying Identity and Access Management for VMware Cloud Foundation is to enable NSX Routing for Management Domain in SDDC Manager. This allows SDDC Manager to communicate with Active Directory servers across different networks.
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.vsan-planning.doc/GUID-AFF133BC-F4B6-4753-815F-20D3D752D898.html
質問 # 53
An administrator is tasked with changing the password of the SDDC Manager super user account in a newly installed VCF environment.
Which method must the administrator use to complete this task?
- A. 1 Log in to the SDDC manager Ul as a user with the ADMIN role
2. Go to Developer Center > API Explorer
3. Expand APIs for managing users.
4. Update password for root user. - B. 1 SSH in to the SDDC Manager VM using the vcf user account.
2. Switch to the root user
3. Enter the passwd admin command.
4. Enter and retype the new password. - C. 1 SSH in to the SDDC Manager VM using the vcf user account.
2. Switch to the root user.
3. Enter the passwd vcf command.
4. Enter and retype the new password. - D. 1 Log in to SDDC manager Ul as a user with the ADMIN role.
2. Go to Administration > Security > Password Management.
3. Select the SDDC Manager account from the component drop-down menu.
4. Click Rotate Now button.
正解：D
解説：
Explanation
To change the password of the SDDC Manager super user account, the administrator should follow these steps:
* Log in to the SDDC Manager UI as a user with the ADMIN role.
* Go to Administration > Security > Password Management.
* Select the SDDC Manager account from the component drop-down menu.
* Click Rotate Now button.
This is the recommended method for changing the password of the SDDC Manager super user account, as documented in the VMware Cloud Foundation Administration Guide:https://docs.vmware.com/en/VMware-Cloud-Foundation/index.html
質問 # 54
......
VMware 5V0-31.22（VMware Cloud Foundationスペシャリスト（V2））認定試験は、クラウドコンピューティングでキャリアを築きたいITプロフェッショナルを対象とした専門的な認定プログラムです。この認定は、VMware Cloud Foundationに焦点を当て、クラウド環境の設計、構成、管理など、クラウドインフラストラクチャのあらゆる側面をカバーしています。
2024年最新の実際にある検証済みの5V0-31.22問題集：https://jp.fast2test.com/5V0-31.22-premium-file.html
合格させる5V0-31.22試験で更新された118問題あります：https://drive.google.com/open?id=1Ki5UOuDEpHXUI-GXk0T3sjAGNshOy062