[2024年12月] 確実合格する有効な方法VMware試験問題集で5V0-31.22試験学習ガイド
5V0-31.22問題集とVMware Cloud Foundation Specialist (v2)トレーニングコースでお客様の合格を楽にさせる学習合格試験問題！
VMware 5V0-31.22（VMware Cloud Foundationスペシャリスト（V2））認定試験は、クラウドコンピューティングでキャリアを築きたいITプロフェッショナルを対象とした専門的な認定プログラムです。この認定は、VMware Cloud Foundationに焦点を当て、クラウド環境の設計、構成、管理など、クラウドインフラストラクチャのあらゆる側面をカバーしています。
VMware Cloud Foundationプラットフォームは、組織がクラウドインフラストラクチャの展開と管理を合理化できるようにする統合されたSDDC（ソフトウェア定義データセンター）プラットフォームです。これは、コンピューティング、ストレージ、ネットワーキング、セキュリティのためのソフトウェア定義のサービスとインフラストラクチャコンポーネントの完全なセットを提供します。 VMware 5V0-31.22試験では、アーキテクチャ、展開、構成、管理など、VMware Cloud Foundationのすべての重要な側面をカバーしています。
質問 # 63
An architect is decommissioning a host from a VI Workload Domain and wants to reuse it in a VMware Cloud Foundation environment.
Which statement accurately describes this process?
- A. Use the decommission host workflow against a host with an unassigned state, and then run the commission host workflow.
- B. Use the decommission host workflow against a host with an assigned state, re-image the host, and then run the commission host workflow.
- C. Use the decommission host workflow against a host with an unassigned state, re-image the host, and then run the commission host workflow.
- D. Use the decommission host workflow against a host with an assigned state, and then run the commission host workflow.
正解：C
解説：
https://docs.vmware.com/en/VMware-Cloud-Foundation/5.0/vcf-admin/GUID-2C3E06BA-7B77-4F4B-958C-1BFCB3E9CBA7.html Removing hosts from the SDDC Manager inventory is called decommissioning. If you want to re-use a host in a different workload domain, you must decommission, re-image, and commission the host before adding it to the workload domain. The hosts that you want to decommission must not be assigned to a workload domain. If a host is assigned to a workload domain, you must remove it before you can decommission it. See Remove a Host from a vSphere Cluster in a Workload Domain.
Use the decommission host workflow against a host with an unassigned state, re-image the host, and then run the commission host workflow. According to the VMware Cloud Foundation documentation1, removing hosts from the SDDC Manager inventory is called decommissioning. If you want to re-use a host in a different workload domain, you must decommission, re-image, and commission the host before adding it to the workload domain. The hosts that you want to decommission must not be assigned to a workload domain. If a host is assigned to a workload domain, you must remove it before you can decommission it.
質問 # 64
A systems administrator is implementing stretched clusters in an environment with multiple Availability Zones (AZs). Which statement accurately describes this design?
- A. The Layer 3 gateway for the workload domain and Edge overlay networks must be highly available across the AZs.
- B. For VLANs that are stretched between AZs, configure load balancing in the Layer 3 gateway between AZs
- C. Layer 3 networks must be stretched between the AZs by the physical infrastructure
- D. If VLAN is stretched between AZ1 and AZ2, the Layer 3 network must also be stretched between the two AZs.
正解：D
解説：
https://docs.vmware.com/en/VMware-Cloud-Foundation/5.0/vcf-admin/GUID-A56D8E59-A549-4624-BC61-4A92710F9FA1.html
質問 # 65
Which license is required to enable Workload Management on VMware Cloud Foundation?
- A. VMware vSphere Enterprise Plus
- B. VMware vSphere Standard
- C. VMware vSphere Evaluation
- D. VMware Tanzu Basic
正解：D
解説：
A Tanzu Basic license is required to enable Workload Management on VMware Cloud Foundation. Once enabled, the Supervisor Cluster must be assigned a Tanzu license before the 60-day evaluation period expires. This license can be added to the license inventory of vSphere if a valid Tanzu Edition license is available.
Reference:
A Tanzu Basic license is required to enable Workload Management on VMware Cloud Foundation. Once enabled, the Supervisor Cluster must be assigned a Tanzu license before the 60-day evaluation period expires. This license can be added to the license inventory of vSphere if a valid Tanzu Edition license is available.
https://docs.vmware.com/en/VMware-Cloud-Foundation/4.2/com.vmware.vcf.vxrail.admin.doc/GUID-E8D0A432-8573-4DF5-9330-A4FE15F74128.html
質問 # 66
An administrator is tasked with deploying a new VI Workload Domain into an existing VMware Cloud Foundation environment. Which three initial shared storage types are supported? (Choose three.)
- A. NFSv3
- B. NFSV4.1
- C. vVols
- D. vSAN
- E. SMB 3.0
- F. VMFS on iSCSI
正解：A、D、F
解説：
Explanation
This is because according to VMware documentation , these are three initial shared storage types that are supported for deploying a new VI Workload Domain into an existing VCF environment. You can also add other supported storage types after deploying the VI Workload Domain.
質問 # 67
During the design phase for a greenfield VMware Cloud Foundation (VCF) deployment, the following design decision has been agreed upon:
- Developer Ready Infrastructure needs to be deployed
The Infrastructure Architect is working with the client to fill the Planning and Preparation Workbook. The Option for 'Developer Ready Infrastructure using VMware Cloud Foundation' has been set to 'Deploy'. The 'Developer Ready Infrastructure using VMware Cloud Foundation' is displaying an error, and its Final Result is stating 'Excluded'.
Which option should be enabled in the Planning and Preparation Workbook to address this issue?
- A. Stretched Cluster for Management Domain
- B. Clustered Workspace ONE Access
- C. Stretched Cluster for Workload Domain
- D. Identity and Access Management for VMware Cloud Foundation
正解：D
質問 # 68
A systems administrator is tasked to configure MTUs for the VCF components and plans on using the recommended MTU size of the Management VLAN for the two Availability Zones in implementing the stretched cluster.
What is the recommended MTU size?
- A. 0
- B. 1
- C. 2
- D. 3
正解：A
解説：
https://docs.vmware.com/en/VMware-Cloud-Foundation/4.5/vcf-admin/GUID-A56D8E59-A549-
4624-BC61-4A92710F9FA1.html
質問 # 69
Which three options are valid use cases for multiple clusters in a workload domain? (Choose three.)
- A. Workload domain with multiple clusters in one rack
- B. One cluster stretching two workload domains
- C. Two clusters forming one stretched workload domain
- D. One stretched cluster across two regions and two workload domains
- E. Workload domain with multiple availability zones each containing clusters
- F. One cluster distributed across two racks and one workload domain
正解：A、C、E
解説：
These are valid use cases for multiple clusters in a workload domain according to VMware documentation. A workload domain with multiple availability zones each containing clusters can provide high availability and disaster recovery by distributing workloads across different physical locations within a region. A workload domain with multiple clusters in one rack can provide scalability and flexibility by allowing different configurations and policies for different clusters within a single logical unit. Two clusters forming one stretched workload domain can provide resiliency and fault tolerance by synchronizing data across two sites within a region.
質問 # 70
A systems administrator needs to apply a custom ESXi image to a host using VMware Imaging Appliance (VIA). Which statement is correct when preparing a host for imaging?
- A. Onboard NICs should be enabled on the server.
- B. VIA service does not support UEFI boot mode.
- C. VMware Cloud Builder appliance must be deployed in a tagged VLAN/Network.
- D. PXE Boot must be configured as the second boot option.
正解：A
解説：
This is because VIA service uses PXE boot to install ESXi on the servers, and it requires onboard NICs to be enabled and connected to an untagged VLAN/Network1.
According to VMware documentation on VMware Imaging Appliance, when preparing a host for imaging using VIA, it is recommended to enable the onboard NICs on the server. This enables the network adapter to participate in the boot sequence of the host to retrieve the image from the Imaging Appliance.
Here is the relevant quote from the documentation:
"To prepare the host, ensure that the onboard NICs are enabled on the server. During boot up, the server firmware detects the network adapter and adds it to the boot sequence list so that it can participate in network boot."
https://docs.vmware.com/en/VMware-Cloud-Foundation/4.5/vcf-deploy/GUID-735928E5-1DD7-44E5-BE32-E598230326AD.html
質問 # 71
An administrator is tasked with providing additional North-South throughput to the workloads hosted on overlay-backed networks in a VI Workload Domain stretched cluster. A two-node NSX Edge cluster was previously deployed through SDDC Manager before the cluster was stretched.
Which option is valid to add two nodes to the existing edge cluster while maintaining password rotation capability?
- A. Expand the existing NSX Edge cluster using SDDC Manager, and place the additional NSX Edge nodes on a different stretched Workload Domain cluster.
- B. Expand the existing NSX Edge cluster using SDDC Manager, and place the additional NSX Edge nodes on the same stretched Workload Domain cluster.
- C. Expand the existing NSX Edge cluster using NSX Manager, and import the additional nodes in SDDC Manager.
- D. Create a new NSX Edge cluster using SDDC Manager on the same stretched Workload Domain cluster.
正解：B
解説：
Explanation
According to VMware Cloud Foundation Specialist (v2) Exam , one of the objectives is to "Describe how to expand an existing NSX-T Edge cluster". The exam guide also states that"SDDC Manager provides a single point of management for password rotation" and that "password rotation must be performed through SDDC Manager".
質問 # 72
An administrator is tasked with preparing hosts for the deployment of a new Workload Domain in a VMware Cloud Foundation environment. The ESXi hosts have HBA cards that require the installation of a separate and the most recent VMware Installation Bundles (VIBs).
Which ESXi imaging method should the administrator use?
- A. VMware vSphere Lifecycle Manager Image
- B. VMware vSphere Auto Deploy
- C. VMware Imaging Appliance
- D. Download and burn the base ESXi Installer ISO Image to a DVD
正解：C
解説：
Preparing the ESXi hosts involves installing the correct version of ESXi and performing some basic configuration tasks. VMware Cloud Foundation supports two methods for preparing these ESXi hosts, either interactively or through the use of the VMware Imaging Appliance service (VIA) which is bundled within VMware Cloud Builder.
質問 # 73
Which order of steps should an administrator use to replace a failed host in a stretched cluster?
- A. 1. Remove the host using cluster APIs.
2. Decommission the failed host.
3. Add the newly commissioned host to the cluster using cluster APIs.
4. Commission the new host with the correct network. - B. 1.Decommission the failed host.
2. Remove the host using cluster APIs.
3. Add the newly commissioned host to the cluster using cluster APIs.
4. Commission the new host with the correct network. - C. 1. Remove the host using cluster APIs.
2. Decommission the failed host.
3. Commission the new host with the correct network.
4. Add the newly commissioned host to the cluster using cluster APIs. - D. 1. Decommission the failed host.
2. Remove the host using cluster APIs.
3. Commission the new host with the correct network.
4. Add the newly commissioned host to the cluster using cluster APIs.
正解：C
解説：
https://docs.vmware.com/en/VMware-Cloud-Foundation/4.5/vcf-admin/GUID-92FD3AEE-5B5F-
421C-B722-44AE0314D84E.html
質問 # 74
Which action(s) can a developer perform on Kubernetes storage classes that are mapped from the VM Storage Policies?
- A. Access Only
- B. Access and Modify
- C. Access, Create, and Delete
- D. Access, Modify, and Delete
正解：A
解説：
This is because according to VMware documentation3, developers can only access Kubernetes storage classes that are mapped from VM Storage Policies. They cannot modify or delete them.
質問 # 75
A VMware Cloud Foundation (VCF) architect is presented with a customer's requirements for an architecture that needs to achieve:
- Network high availability across workloads in two data center
locations.
- Maintain the least administrative overhead when performing day 2
operations.
- Decrease the RTO of both management plane and data plane when site-
wide failure occurs.
Which VCF design consideration should the architect recommend?
- A. VCF with NSX-T Bridging
- B. VCF with NSX-T Multi-Site
- C. VCF with NSX-T Federation
- D. VCF with NSX-T L2-VPN
正解：C
解説：
https://blogs.vmware.com/cloud-foundation/2021/02/09/introducing-nsx-t-federation-support-in- vmware-cloud-foundation/
質問 # 76
Which license is required to enable Workload Management on VMware Cloud Foundation?
- A. VMware vSphere Enterprise Plus
- B. VMware vSphere Standard
- C. VMware vSphere Evaluation
- D. VMware Tanzu Basic
正解：D
解説：
https://docs.vmware.com/en/VMware-Cloud-Foundation/4.5/vcf-admin/GUID-E8D0A432-8573-
4DF5-9330-A4FE15F74128.html
質問 # 77
Which two options are only available when using vSphere Lifecycle Manager Images? (Choose two.)
- A. Upgrade VM Hardware Compatibility versions.
- B. Install and update third-party software on all ESXi hosts in a cluster.
- C. Check the hosts and clusters against the vSAN Hardware Compatibility List.
- D. Upgrade and patch ESXi hosts.
- E. Update the firmware of all ESXi hosts in a cluster.
正解：B、E
解説：
Explanation
This is because vSphere Lifecycle Manager images can include firmware updates and third-party software components that can be applied to all hosts in a cluster12. These options are only available when using vSphere Lifecycle Manager images, not when using vSphere Lifecycle Manager baselines2.
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere-lifecycle-manager.doc/GUID-9A11223
質問 # 78
A systems administrator is tasked to deploy VMware Cloud Foundation (VCF) and has already deployed the VMware Cloud Builder appliance.
What is the next step the systems administrator should take?
- A. Prepare and configure the ESXi hosts to be used in the deployment.
- B. Configure the Management Domain using custom certificates.
- C. Deploy the Management Domain using VMware Cloud Builder.
- D. Upload the Deployment Parameter Workbook.
正解：D
質問 # 79
Which two configurations are part of the VMware Cloud Builder validation process? (Choose two.)
- A. License key Validates format, validity, and expiry for ESX, vSAN, vCenter Server, NSX, vRealize Suite, and Log Insight license keys
- B. Passwords: Validates specified passwords Checks for minimum length, invalid characters, and format
- C. Availability configuration: Validates the access to the configured backup locations
- D. Certificates: Validates certificates for ESX, vCenter Server, and NSX
- E. Network configuration: Validates CIDR to IP address validity, IP addresses in use, gateways, invalid or missing VLANs. invalid or missing MTU, and network spec availability for all components
正解：B、E
解説：
See 'Figure 25. Configure Cloud Builder validation' at https://infohub.delltechnologies.com/l/dell-poweredge-mx-deployment-with-vmware-cloud-foundation-deployment-guide/vmware-cloud-builder-configuration-validation https://my-cloudy-world.com/2021/05/28/vmware-cloud-builder-bringup-validation-tasks/
質問 # 80
Which three options are valid use cases for multiple clusters in a workload domain? (Choose three.)
- A. Workload domain with multiple clusters in one rack
- B. One cluster stretching two workload domains
- C. Two clusters forming one stretched workload domain
- D. One stretched cluster across two regions and two workload domains
- E. Workload domain with multiple availability zones each containing clusters
- F. One cluster distributed across two racks and one workload domain
正解：A、C、E
解説：
https://docs.vmware.com/en/VMware-Validated-Design/5.1/sddc-architecture-and-design/GUID- B957A22C-C1A4-46EA-967D-EC5F4A3DF84F.html
質問 # 81
Which two use cases would require the creation of multiple clusters in a workload domain? (Choose two.)
- A. Different virtual machine workload types
- B. Different host CPU types
- C. Bare-Metal vs. virtual workloads
- D. Different application licensing models
- E. Different memory requirements
正解：A、B
解説：
This is because according to VMware documentation3, these are two use cases that would require the creation of multiple clusters in a workload domain. Different host CPU types may affect EVC compatibility and performance across clusters4. Bare-Metal vs. virtual workloads may have different storage and network requirements that need separate clusters5.
質問 # 82
An architect is designing overlay networking for multiple VMware Cloud Foundation VI workload domains. Each workload domain is composed of two clusters which reside within a single rack, and each rack hosts only a single workload domain. Workload domains are assigned to individual tenants.
The following requirements must be met in the design.
- Tenants require the capability to manage their own NSX-T networking.
- Each VI workload domain compute cluster must have its own Tier-0
gateway for traffic separation.
- No additional hardware costs can be incurred.
Which design meets these customer requirements?
- A. Create separate NSX-T Manager clusters for each workload domain, and then deploy an NSX-T Bare Metal Edge cluster in each rack.
- B. Use a shared NSX-T Manager cluster between workload domains, and then deploy an NSX-T VM Edge cluster in each compute cluster.
- C. Use a shared NSX-T Manager cluster between workload domains, and then deploy an NSX-T Bare Metal Edge cluster to host multiple Tier-0 VRFs.
- D. Create separate NSX-T Manager clusters for each workload domain, and then deploy an NSX-T VM Edge cluster in each VI workload domain.
正解：D
質問 # 83
An administrator wants to scale an existing VMware Cloud Foundation (VCF) environment by adding a new VI Workload Domain. Which two storage options can be used for the new VI Workload Domain? (Choose two.)
- A. iSCSI principal storage with SMB supplemental storage
- B. vSAN principal storage with SMB supplemental storage
- C. vVOL principal storage with SCSI supplemental storage
- D. vSAN principal storage with NFS supplemental storage
- E. vSAN principal storage with VMFS on FC supplemental storage
正解：D、E
解説：
This is because according to VMware documentation, these are some of the storage options that can be used for a new VI Workload Domain:
vSAN principal storage with VMFS on FC supplemental storage: You can use vSAN as your primary storage platform and add VMFS on FC as an additional storage option.
vSAN principal storage with NFS supplemental storage: You can use vSAN as your primary storage platform and add NFS as an additional storage option.
https://infohub.delltechnologies.com/l/dell-storage-with-vmware-cloud-foundation-1/principal-and-supplemental-storage-for-workload-domains-1
質問 # 84
What is a valid procedure to replace an expired vSAN license in a VMware Cloud Foundation environment?
- A. 1. Add a new vSAN license to the SDDC Manager.
2. Reassign the vSAN license to the cluster in the SDDC Manager.
3. Remove the expired vSAN license from the SDDC Manager. - B. 1. Add a new vSAN license to the SDDC Manager and vCenter Server.
2. Reassign the vSAN license to the cluster in the vCenter Server.
3. Remove the expired vSAN license from the SDDC Manager and vCenter Server. - C. 1. Add a new vSAN license to the SDDC Manager.
2. Connect to SDDC Manager via SSH, and then restart Domain Manager using systemctl restart domainmanager.
3. Verify in the SDDC Manager whether a new vSAN license has been assigned to the cluster. - D. 1. Add a new vSAN license to the vCenter Server.
2. Connect to SDDC Manager via SSH, and then restart Lifecycle Management using systemctl restart lcm.
3. Verify in the vCenter Server whether a new vSAN license has been assigned to the cluster.
正解：B
解説：
https://my-cloudy-world.com/2022/06/28/updating-a-vsan-license-in-vmware-cloud-foundation/
質問 # 85
......
VMware Cloud Foundationスペシャリスト（V2）認定試験は、VMware Cloud Foundation環境を展開および管理する機能について候補者をテストします。 VMware Cloud Foundation環境の計画と設計、SDDCマネージャーの展開と構成、VSPhereのセットアップと構成、VSANのセットアップと構成、NSX-Tの設定と構成、VMware Cloud Foundation環境の管理などのトピックをカバーしています。この試験に合格すると、完全なVMware Cloud Foundation環境を実装および管理するために必要なスキルが検証され、クラウドコンピューティングのキャリアを促進しようとするIT専門家にとって貴重な認定となります。
リアル試験問題と解答VMware 5V0-31.22問題集はここに：https://drive.google.com/open?id=1Ki5UOuDEpHXUI-GXk0T3sjAGNshOy062
最新 [2024年12月] 効果的な学習法で試験合格できる5V0-31.22：https://jp.fast2test.com/5V0-31.22-premium-file.html