HPE0-S60問題集でリアル試験問題でテストエンジン問題集でトレーニング [Q15-Q35]

HPE0-S60問題集でリアル試験問題でテストエンジン問題集でトレーニング

HP HPE0-S60テスト問題集とオンライン試験エンジン

質問 15
Your customer has an HPE Synergy platform deployed and managed using HPE OneView. The customer also has HPE Superdome Flex with RMC deployed They plan to deploy a second nPar and HPE Superdome Flex 280 They plan to manage new components using HPE OneView What must be done to achieve this goal?

A. The customer must use IL05 to add HPE Superdome Flex systems to HPE OneView
B. The customer has to add HPE Superdome Flex to the HPE OneView used to manage HPE Synergy
C. The customer should deploy an HPE OneView appliance for HPE Superdome Flex management
D. The customer must add a second Rack Management Controller for HPE Superdome Flex 280

正解: D

質問 16
You need to configure a RoCE network to enable lossless networking for HPE J2000 Flash Enclosure support Which interconnects are required to support this connection? (Select two.)

A. Brocade 32Gb Fibre Channel SAN Switch Module for HPE Synergy
B. HPE Virtual Connect SE 16Gb FC Module for HPE Synergy
C. HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy
D. Brocade 16Gb Fibfe Channel SAN Switch Module for HPE Synergy
E. HPE Virtual Connect SE 32Gb FC Module for HPE Synergy
F. HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy

正解: B,E

質問 17
Click the area within the iLO management interface that will allow you to access workload Advisor.

正解:

解説:

質問 18
You need to setup HPE Synergy frames after hardware components are discovered within HPE OneView.
Put the steps to achieve this goal into the coned order in the answer area on the right.

正解:

解説:

1 - Create a logical interconnect group with uplink sets.
2 - Create a logical enciosure.
3 - Create an enciosure group.
4 - Create server profile templates and server profiles.
5 - Define all required networks.

質問 19
Match each HPE OneView network type with its definition.

正解:

解説:

質問 20
Your customer is implementing an HPE Synergy solution based on three frames.
Click each of the ports that can be used to connect satellite modules.

正解:

解説:

質問 21
Your customer uses HPE OneView to manage their HPE Synergy environment. They plan to use it to manage a new set equipment that includes.
- 20 HPE ProLiant DL365 Gen10 Plus servers
- 20 HPE ProLiant DL380 Gen10 Plus servers
- 5 HPE Primera 650
- 5 HPE MSA 2062 Storage Array
Which statements about now OneView will work with this new equipment are true? (Select two)

A. HPE ProLiant DL380 Gen10 Plus servers have an HPE OneView license included
B. HPE ProLiant DL365 Gen10 Plus servers are not supported in HPE OneView
C. HPE MSA 2062 Storage Array is not supported in HPE OneView
D. HPE OneView replaces array management tools for both types of array
E. HPE Primera 650 can be managed using HPE OneView.

正解: A

質問 22
Your customer reports that they cannot deploy HPE Synergy compute nodes using HPE OneView for VMware vCenter Server (HPE OV4VC).
What should you check during troubleshooting process?

A. If an compute nodes are added to the vCenter Server
B. If HPE OneView credentials are added in vCenter Server
C. If vCenter Server is licensed in the HPE Oneview interface
D. If the HPE Oneview instance Is integrated with HPE OV4VC.

正解: A

質問 23
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.

正解:

解説:

質問 24
Your customer used to manage their HPE 3PAR arrays using HPE OneView Now they have replaced these arrays HPE Primera.
How does managing the new arrays compare to managing their old arrays?

A. HPE OneView offers additional functionalities for HPE Primera like CPG management
B. To manage HPE Primera using HPE OneView. a dedicated license is required
C. Management procedures and features are the same tor both types of the array
D. HPE OneView offers limited support tor HPE Primera because of the firmware differences

正解: A

質問 25
Your customer plans to setup an HPE Synergy solution based on SY480 Gen10 compute nodes with the following connectivity options - SAS connectivity installed in the first fabric - FC connectivity Installed In the second fabric - Ethernet connectivity installed in the third fabric.
Which statement regarding this setup is true?

A. Compute nodes must have a second CPU installed to access the second fabric.
B. Each compute node must have at least 768GB of memory installed
C. Each interconnect module in each fabric must be properly licensed in HPE OneView
D. Interconnect modules that provide SAS connectivity should be moved to the third fabric

正解: B

質問 26
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They also plan a vSAN deployment leveraging HPE D3940 Storage Modules and SSD drives The customer requested the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- Two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- An appropriate number of vSAN Standard licenses for each compute node
- One HPE O3940 Storage Module with 40 SSDs - All required cables and options Which statement about this request is true?

A. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drives.
B. vSphere Standard licenses should be replaced with Enterprise Plus licenses to enable vSAN
C. vSphere licenses should be added, as vSAN licenses do not replace vSphere licenses
D. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM

正解: B

質問 27
Your customer wants to compare HPE Superdome Flex with HPE Superdome Flex 280.
Which statement about these two systems is true?

A. Only HPE Superdome Flex supports 32 sockets and 48TB of memory
B. Only HPE Superdome Rex 280 can be managed using HPE OneView
C. Only HPE Superdome Flex 280 can support multiple nPars
D. Only HPE Superdome Flex supports HPE Persistent Memory

正解: B

質問 28
Your customer has the following HPE Synergy setup:
- 15 HPE Synergy 12000 frames with 50Gb connectivity to each server port
- 2 HPE Composer 2 modules
- 15 HPE D3940 Storage Modules, one per frame
- 2 HPE 12Gb SAS switches per frame
Which statement about this setup is true?

A. If properly cabled, any compute node can access any HPE D3490 storage module
B. The customer must create at least five logical enclosures for this setup.
C. To manage 15 frames, additional HPE Composers are required.
D. The customer can install up to 12 HPE Synergy 480 compute nodes per frame.

正解: B

質問 29
After deploying HPE Superdome Flex 280 you need to check Core Analysis Engine (CAE) Log.
Click the appropriate section in the HPE Superdome Flex 280 management interface that will allow you to complete this task.

正解:

解説:

質問 30
Your customer is trying to grow a VMware duster using HPE OneView for VMware vCenter Server. They get an error and cannot proceed Which tool should you use to troubleshoot the problem?

A. ILO interlace of a given HPE Synergy compute node to verify whether this node is registered within HPE Oneview.
B. HPE One View for VMware vCenter Server to verify if server profile template s property imported and registered
C. vCenter Server to verify if an OS Bund Plans property defined and has ESXi image uploaded
D. HPE OneView interface to import an existing cluster using the hypervisor cluster profile functionality.

正解: B

質問 31
Your customer has experience with utilization sampling for HPE Virtual Connect SE 100 Gb F32 Module for HPE Synergy. They have recently purchased HPE VC FC modules.
What must you be aware of regarding utilization sampling for the new modules?

A. Utilization sampling works the same way tor any type of HPE Synergy interconnect modules
B. For HPE VC FC modules, utilization sampling is always enabled and cannot be disabled
C. Utilization sampling for HPE VC FC modules must be enabled manually using CLI.
D. For HPE VC FC modules, utilization sampling can be enabled once appropriate license is applied

正解: C

質問 32
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?

A. If the D3940 module is imported in managed state that allows volume provisioning.
B. If there Is a logical interconnect created based on the 12Gb SAS switches.
C. If there is at least one ISCSI network configured that will provide access to the module.
D. If the D3940 storage module is property licensed through HPE OneView interface.

正解: A

質問 33
Which statement about the SY480 Gen10 Plus Compute Module is true?