最新のHPE0-S60試験問題集でHP試験にはトレーニングを提供しています
合格できるHP Delta - HPE Compute SolutionsのPDF問題集は最近更新された82問あります
HP HPE0-S60認定試験に備えるためには、候補者はHPEコンピュートソリューション技術とアーキテクチャの深い理解を持っている必要があります。また、HPEのトレーニングコース、練習問題、および学習資料を活用して、試験に備えることができます。HP HPE0-S60試験に合格することで、候補者はキャリアの機会を向上させ、潜在的な雇用主に対してHPEコンピュートソリューションの専門知識を証明することができます。
HP HPE0-S60（Delta - HPE Compute Solutions）試験は、HPEコンピューティングソリューションの分野におけるIT専門家の知識とスキルを検証する認定試験です。この試験は、すでにHPE ATP - Server Solutions V3認定を取得し、最新のHPEコンピューティングソリューションの知識を検証したい個人を対象としています。HPE0-S60試験はデルタ試験であり、HPE ATP - Server Solutions V3認定のリリース以降のHPEコンピューティングソリューションの新しいトピックと更新内容をカバーしています。
質問 # 11
Your customer plans to deploy VMware vSAN using D3940 Storage Modules.
Which statement about this solution is true?
- A. All drives in the D3940 storage modules must formulate a single logical drive with RAID5 configured
- B. To use the storage controller that will access D3940 storage modules, a second CPU must be installed.
- C. The 12Gb SAS modules required for D3940 connectivity can only be installed in the first fabric.
- D. For VMware vSAN deployment, all drives in the D3940 storage modules must be SSD drives.
正解：C
質問 # 12
Your customer has an HPE Synergy platform deployed and managed using HPE OneView. The customer also has HPE Superdome Flex with RMC deployed They plan to deploy a second nPar and HPE Superdome Flex 280 They plan to manage new components using HPE OneView What must be done to achieve this goal?
- A. The customer must add a second Rack Management Controller for HPE Superdome Flex 280
- B. The customer should deploy an HPE OneView appliance for HPE Superdome Flex management
- C. The customer must use IL05 to add HPE Superdome Flex systems to HPE OneView
- D. The customer has to add HPE Superdome Flex to the HPE OneView used to manage HPE Synergy
正解：A
質問 # 13
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?
- A. If the D3940 storage module is property licensed through HPE OneView interface.
- B. If there Is a logical interconnect created based on the 12Gb SAS switches.
- C. If there is at least one ISCSI network configured that will provide access to the module.
- D. If the D3940 module is imported in managed state that allows volume provisioning.
正解：D
質問 # 14
Your customer plans to setup an HPE Synergy solution based on SY480 Gen10 compute nodes with the following connectivity options - SAS connectivity installed in the first fabric - FC connectivity Installed In the second fabric - Ethernet connectivity installed in the third fabric.
Which statement regarding this setup is true?
- A. Each interconnect module in each fabric must be properly licensed in HPE OneView
- B. Interconnect modules that provide SAS connectivity should be moved to the third fabric
- C. Compute nodes must have a second CPU installed to access the second fabric.
- D. Each compute node must have at least 768GB of memory installed
正解：D
質問 # 15
Put the steps of the HPE infosight flow in the correct order.
正解：
解説：
1 - Observing
2 - Learning
3 - Predicting
4 - Recommending
5 - Acting
質問 # 16
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.
正解：
解説：
1 - Add vCenter Server to HPE OneView for VMware vCenter Server.
2 - Add HPE OneView credentials to the vCenter Server and create OS Deployment Plan.
3 - Upload HPE-friendly ESXi image.
4 - Deploy new ESXi systems using vCenter Server interface.
質問 # 17
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. To use interconnect bay set 3, all compute nodes must be half-height
- B. The master modules are located in the interconnect bays 2 and 5
- C. For the given downlink speed, the maximum number of frames is reached
- D. Both master modules are located in the same HPE S ynergy frame
正解：D
質問 # 18
Your customer experienced some problems caused by outdated HPE Superdome Flex firmware. Which update method should they use to avoid these issues in the future?
- A. RMC CLI to update I/O and HPE Persistent Memory firmware
- B. HPE OneView method for I/O firmware update procedure
- C. HPE OneView IT HPE Persistent Memory firmware must be updated.
- D. HPE SUM if HPE Persistent Memory firmware must be updated
正解：A
質問 # 19
In the past a customer experienced a networking issue where network ports went down and came back up in quick succession.
Which HPE Virtual Connect SE 100 GD F32 Module for HPE Synergy feature can be configured to disable such ports?
- A. Port flap protection
- B. Pause flood protection
- C. sFlow
- D. Storm control
正解：C
質問 # 20
The proposal consists of.
- 3 HPE Synergy 12000 frames
- 6 HPE Composer 2 modules
- 2 HPE Virtual Connect SE 100 GO F32 Module
- 4 HPE Synergy 50 GO interconnect Link Module
Which statements about this proposed design are true? (Select two.)
- A. HPE Synergy 50Gb ILMs must be replaced with HPE Virtual Connect SE 100 GO F32 modules
- B. The selected interconnect modules do not provide the requested WWN virtualization
- C. Remove 4 HPE Composer 2 modules from the design, as they are not required
- D. The current setup can support up to 18 HPE Synergy 480 Gen10 Plus compute modules
- E. FC upgrade licenses for HPE Virtual Connect SE 100 GbF32 Module must be added
正解：A、E
質問 # 21
You need to setup HPE Synergy frames after hardware components are discovered within HPE OneView.
Put the steps to achieve this goal into the coned order in the answer area on the right.
正解：
解説：
1 - Create a logical interconnect group with uplink sets.
2 - Create a logical enciosure.
3 - Create an enciosure group.
4 - Create server profile templates and server profiles.
5 - Define all required networks.
質問 # 22
Your customer wants to add dedicated Fibre Channel connectivity to the HPE Synergy frame running HPE Synergy 480 Gen10 compute modules, each with one CPU socket populated Currently they use two 12 Gb SAS switches and two HPE Virtual Connect SE 100Gb F32 Modules for HPE Synergy installed in third fabric.
What must be done to enable dedicated FC connectivity for this HPE Synergy frame?
- A. A second CPU must be installed for all HPE Synergy 480 Gen10 compute nodes.
- B. For VC-FC modules, all of server facing ports must be property licensed.
- C. SAS switches must be moved to second fabric and FC modules Installed in the first one.
- D. For Brocade switches, a logical interconnect group must be created in HPE OneView.
正解：C
質問 # 23
Your customer has 6 logical enclosures spanning 18 HPE Synergy frames. The customer needs to add one more logical enclosure based on 5 HPE Synergy frames How will this change impact the customer environment?
- A. The customer can add a new logical enclosure to the existing setup because the maximum number of logical enclosures in a single management ring is not reached.
- B. The customer has to create a new management ring for new logical enclosure because the maximum number of frames m a single management ring is reached.
- C. The customer has to expand the management ring capacity either by adding HPE Composer 2 modules or adding memory to reach 128GB per module.
- D. The customer can add a new logical enclosure to an existing setup once all required licenses are added lo HPE OneView and associated with the new frames.
正解：A
質問 # 24
After deploying HPE Superdome Flex 280 you need to check Core Analysis Engine (CAE) Log.
Click the appropriate section in the HPE Superdome Flex 280 management interface that will allow you to complete this task.
正解：
解説：
質問 # 25
Your customer manages an HPE Synergy platform using HPE OneView 5.6. To leverage new functionalities, the customer wants to update HPE OneView to version 61 Which statement about this update process is true?
- A. To update to 6,1, the customer has to first update to 6 0, which is a milestone edition.
- B. The customer must check the HPE Composer version, as 61 is supported only with HPE Composer2.
- C. Before updating to 6,1, customer should increase memory size on the HPE Composer.
- D. The customer can update directly to 6,1, but HPE OneView downtime will be longer.
正解：B
質問 # 26
Your customer has the following HPE Synergy setup
- 3 HPE Synergy 12000 Frames
- 4 HPE Virtual Connect SE 100 Gb F32 Modules
- 2 HPE Synergy 50 GO Interconnect Link Modules
- 36 HPE Synergy 480 Gen10 Plus compute modules
- 2 HPE Composer 2 modules
Which statement about this setup is true?
- A. To manage all frames, the customer must buy two additional HPE Composer 2 modules
- B. To use all compute nodes, the customer must create at least two logical enclosures
- C. The customer must buy 36 HPE OneView Advanced licenses to manage compute modules
- D. The customer can add one D3940 storage Module to each of the frames
正解：C
質問 # 27
You plan to configure a Link Aggregation Group (LAG) for two connections within a server profile for a compute node running an ESXI system.
What is required from the VMware side to enable LAG?
- A. Virtual Distributed Switch
- B. Dedicated VMKernel port
- C. vSphere Standard license
- D. Load balancing cluster
正解：B
質問 # 28
What is a restriction of using a RoCE network?
- A. It does not support smart link and private network features.
- B. It does not support Private VLAN and Multicast VLAN.
- C. it is not supported with HPE Virtual Connect SE 40 GD F8 Module for HPE Synergy.
- D. It is by default configured as an untagged network and cannot be a part of a network set.
正解：D
質問 # 29
Your customer plans to expand an existing nPar based on a single HPE Superdome Flex chassis. Which statement about workload availability during expansion is true?
- A. Powered nPar can be expanded only if HPE Superdome Flex 280 is used
- B. Powered nPar can be expanded if it does not use HPE Persistent Memory
- C. Online expansion is available only if RMC is used for management.
- D. HPE Superdome Flex does not support expansion of powered on nPars
正解：A
質問 # 30
Match HPE SimpliVity term with the definition.
正解：
解説：
質問 # 31
Which compute node parameters are captured within server hardware type?
- A. Mezzanine card configuration
- B. Number of the CPUs
- C. Size of the memory Installed
- D. installed operating system
正解：D
質問 # 32
A logical interconnect group can span on multiple HPE Synergy frames for which interconnect type?
- A. Brocade 32GB Fibre Channel Switch Module for HPE Synergy
- B. HPE virtual Connect SE 32 Gb FC Module for Synergy
- C. HPE Synergy 12 Gb SAS Connection Module
- D. HPE Virtual Connect SE 100 Gb F32 Module tor Synergy
正解：D
質問 # 33
Your customer plans to use HPE Primera to boot HPE Synergy compute nodes. They currently have two HPE Virtual Connect SE 100Gb F32 Module for Synergy modules installed in the frame. The customer wants to use FC as a storage access protocol What must be done to complete this task?
- A. FC connectivity on the modules should be enabled through the service console by disabling FCoE.
- B. Enter both modules into a maintenance mode, then enable FC connectivity through CLI
- C. Add FC upgrade licenses in HPE OneView that will enable FC connectivity for the modules
- D. Enable FC primary and secondary boot on the modules through the HPE OneView interface
正解：A
質問 # 34
......
HPE ATP - Server Solutions V4 資格認定は世界的に認められ、IT専門家の履歴書にとって貴重な追加要素となります。それは、保有者がHPEコンピュートソリューションに熟練しており、HPEサーバーおよびソフトウェア定義ソリューションを実装および管理できることを示しています。また、この資格認定は、HPE Master ASE - Server Solutions Architect V4などのより高度な資格認定の前提条件でもあります。
更新されたテストエンジン練習HPE0-S60問題集と練習試験で使おう：https://jp.fast2test.com/HPE0-S60-premium-file.html
問題集お試しセットHPE0-S60テストエンジン問題集トレーニングには82問あります：https://drive.google.com/open?id=12EtrhVXJ6MFH7jqWUCim9ptYzJCXM6_H