[2025年05月27日] あなたを合格させるNS0-516無料最新問題集でNetwork Appliance練習テスト
無料でゲット！高評価Network Appliance NS0-516試験問題集を今すぐダウンロード！
この認証試験は、NetApp E-Series SANソリューションを扱うIT専門家、ストレージ管理者、システムエンジニア、コンサルタントに最適です。試験は、これらのソリューションで使用されるハードウェア、ソフトウェア、プロトコルを含むNetApp E-Series SANソリューションの理解をテストするように設計されています。
Network Appliance NS0-516（NetApp Implementation Engineer SAN Specialist E-Series（NCIE））試験は、NetApp E-Seriesストレージソリューションを設計、実装、管理するスキルを検証したいストレージの専門家向けに設計された認定試験です。この試験は、NetApp E-Seriesストレージシステムを使用したSANの設計、実装、管理に関する候補者の知識をテストします。この認定は、SAN環境でNetAppストレージシステムを実装および管理した経験のある個人向けに設計されています。この認定は、エンタープライズレベルのストレージインフラストラクチャを管理するスキルを証明したい人に最適です。
ネットワークアプライアンスNS0-516試験は、NetAppが認める特定のベンダー向け認定試験です。この認定は、NetApp E-Seriesストレージシステムを使用してSANソリューションを設計、展開、管理するITプロフェッショナルを対象としています。この認定試験は、SANの実装と管理の分野でキャリアを進めたいITプロフェッショナルに最適です。
質問 # 34
A customer needs to add an EF280 with FC into its existing Brocade fabric but the FC ports in the SANtricity System Manager are showing the FC ports as down and the LED on the FC HIC is amber.
Which three tasks does the installer need to complete to solve this problem? (Choose three.)
- A. Verify that the switch zone has the WWPNs for the EF280 and Server HBAs
- B. Verify that the ports are enabled on the switch
- C. Verify that the cables are plugged into the switch
- D. Verify that the EF280s management port is up
- E. Verify that the server HBA has the boot BIOS enabled
正解：A、B、C
解説：
* Verify Switch Port Status:
* Step:Check the status of the FC ports on the Brocade switch.
* Reason:The ports need to be enabled for communication.
質問 # 35
Which three factors should you consider before you install an E2860 in a data center? (Choose three)
- A. heat dissipation
- B. ambient temperatures
- C. fire suppression capacity
- D. electromagnetic interference
- E. current draw
正解：A、B、E
質問 # 36
A customer has launched a data analytics initiative and has been transferring old data into the new data lake. The customer has discovered some data read errors during the transfer process.
In this scenario, how should the customer have avoided these data integrity issues?
- A. by turning on erasure coding
- B. by turning on cyclic redundancy checks (CRCs)
- C. by deploying secure-capable drives
- D. by ensuring that data assurance and media scan are always activated
正解：D
質問 # 37
Which three documents should be provided to the customer after the e-Series installation is complete?
(choose three.)
- A. a b a document with IMT pages that show the supported host configuration and fabric switches in the solution
- B. a document showing the cabinet layout with cabling information and IP addresses being used
- C. a document showing user IDs and passwords for all deployed devices
- D. a document showing available power on the UPS with no equipment connected
- E. a document showing how much space is available for system expansion
正解：A、B、C
質問 # 38
Your AutoSupport does not automatically send reports to NetApp's ActiveIQ tool.
In this scenario, how do you access the data that would have been sent using the AutoSupport feature?
- A. Access the event log by using SANtricity System Manager
- B. Use SANtricity Unified Manager to collect the support data remotely
- C. Ask NetApp Support to help you to access the data by using special support tools
- D. Use SANtricity System Manager to manually collect the support data
正解：D
解説：
* Explanation:
* When AutoSupport is not automatically sending reports to NetApp's ActiveIQ tool, you can manually collect the support data using SANtricity System Manager.
* The manual collection involves generating a support bundle that includes all necessary logs and system information.
* This data can then be reviewed locally or sent to NetApp support for analysis if needed.
質問 # 39
Which three connection types would be used between the host and the storage array in a switched environment? (Choose three.) Note: Answers to this question are not verified by our experts, please study yourself and select the appropriate answers.
Contribute: Please send the correct answers with reference text/link on [email protected] to get up to 50% cashback.
- A. USB-C
- B. InfiniBand
- C. Fibre Channel
- D. Ethernet
- E. direct attach
正解：A、B、C
質問 # 40
Which expansion shelf and E-Series model pairing is correct?
- A. DE5600 and E2712
- B. DE5600 and E5612
- C. DE5600 and E5660
- D. DE5600 and E2724
正解：D
質問 # 41
What is the maximum number of FC host interface cards used per NetApp EF600 storage array?
- A. 0
- B. 1
- C. 2
- D. 3
正解：C
質問 # 42
A customer needs to add an EF280 with FC into its existing Brocade fabric but the FC ports in the SANtricity System Manager are showing the FC ports as down and the LED on the FC HIC is amber.
Which three tasks does the installer need to complete to solve this problem? (Choose three.)
- A. Verify that the switch zone has the WWPNs for the EF280 and Server HBAs
- B. Verify that the ports are enabled on the switch
- C. Verify that the cables are plugged into the switch
- D. Verify that the EF280s management port is up
- E. Verify that the server HBA has the boot BIOS enabled
正解：A、B、C
質問 # 43
What measurement refers to the number of read/write requests that can be handled in a 1-second time period? (Choose the best answer.)
- A. Parity
- B. I/O alignment
- C. Throughput
- D. Read modify write
- E. IOPS
正解：E
質問 # 44
To enable one-way authentication in a new iSCSI Linux implementation, which three modifications should you make in the /etc/iscsi/iscsi.conf file on the Linux host? (Choose three.)
- A. the target username and password
- B. the initiator username and password
- C. CHAP
- D. sendtargets discovery
- E. iSCSI
正解：C、D
質問 # 45
If you have to replace the battery on a controller, you should put the controller into which state?
- A. suspend
- B. service mode
- C. quiesced
- D. lockdown
正解：B
質問 # 46
What does a lit blue SAA LED indicate?
- A. Power is turned on to the component.
- B. The component has failed.
- C. The component is functioning normally.
- D. It is safe to remove the component.
正解：D
質問 # 47
Exhibit:
Referring to the exhibit, a customer needs to verify the power draw for the uninterruptible power supply (UPS) that is supporting ten E2824 shelves in a cabinet connected to a 100/110 volts power source.
What is the power draw in amps for the UPS?
- A. 0
- B. 1
- C. 2
- D. 3
正解：B
質問 # 48
An administrator is asked to create an asynchronous mirroring environment that supports multiple mirroring relationships, each with different recovery point objectives (RPOs).
In this scenario, how does the administrator create this environment?
- A. The administrator creates multiple mirror consistency groups with the appropriate RPOs
- B. The administrator creates multiple mirror pairs, each with their own schedule and RPO
- C. The administrator creates a single consistency group with multiple RPOs
- D. The administrator creates a mirror group with the appropriate RPOs
正解：B
解説：
Explanation: To support multiple mirroring relationships, each with different recovery point objectives (RPOs), the administrator should create multiple mirror pairs. Each pair can be configured with its own schedule and RPO, allowing for tailored data protection strategies that meet specific needs.
Reference: NetApp SANtricity Storage Manager Configuration and Provisioning Guide.
質問 # 49
Barring a specific instruction from technical support or in the release notes, what software should be upgraded or installed first?
- A. Disk firmware
- B. SANtricity client
- C. Controller firmware
- D. ESM firmware
正解：B
質問 # 50
Which command will display which Brocade switches are connected into a fabric?
- A. switchshow
- B. configshow
- C. show fabric
- D. fabricshow
正解：D
質問 # 51
You help a customer diagnose a performance issue on an E-Series storage system. You decide to measure the amount of data that is being handled over the span of an hour.
In this scenario, what are you measuring?
- A. throughput
- B. I/O alignment
- C. IOPS
- D. parity
正解：C
質問 # 52
A customer has an E5760 array with a 30-drive Dynamic Disk Pool (DDP) that uses 800 GB SSD drives. The customer needs to expand the pool by one drive but has only a 1.6 TB SSD drive available.
In this scenario, what happens when the customer attempts to add the 1.6 TB drive to the existing pool?
- A. The pool is expanded by 1.6 TiB
- B. The pool is expanded by 1.6 TB
- C. An error occurs, and the add fails
- D. The pool is expanded by 800 GB
正解：B
解説：
Explanation
https://mysupport.netapp.com/NOW/public/eseries/sam_archive1150/GUID-8538272A-B802-49D9-9EA2-96C8
質問 # 53
Which alerting method would be configured using the SANtricity System Manager setup wizard?
- A. Web Services Proxy
- B. Email
- C. Syslog
- D. SNMP
正解：D
質問 # 54
......
一発合格の秘訣は無料でゲット！NS0-516Certified 試験エンジンPDF：https://jp.fast2test.com/NS0-516-premium-file.html
NS0-516試験問題集合格には最新なテスト問題集：https://drive.google.com/open?id=1sa3v4rjTfNf1fPEn8SBh_TMYjhMDJ2G0