最新 [2022年03月19日]Network Appliance NS0-516試験練習でテストの素晴らしい結果を出そう
あなたのキャリアーを稼いで飛躍せよNetwork Appliance NS0-516
質問 28
Identify this controller.
- A. E2700
- B. E5500
- C. E5600
- D. E5400
正解: D
質問 29
With a system cache block size of 32K, how much cache space per I/O is "lost" if incoming I/Os are all 48K writes? (Choose the best answer.)
- A. 24K
- B. 16K
- C. 8K
- D. 0 - no space is lost
- E. 4K
正解: B
質問 30
Which iSCSI setting would you change from its default value to increase the throughput of an iSCSI host port on a NetApp E-Series system?
- A. Time to Live (TTL)
- B. Challenge-Handshake Authentication Protocol (CHAP)
- C. maximum transmission unit (MTU)
- D. flow control
正解: C
質問 31
A customer is running several EF570 systems and uses the ability of the EF-Series systems to run two host protocols at the same time.
You are installing a new EF570 that uses the NVMe protocol for a high performance computing application. The controller on-board ports will not connect, but the HIC ports are working fine.
In this scenario, what is the problem?
- A. The switch ports are shut-down
- B. There is a cable fault preventing the on-board ports from connecting
- C. The on-board host ports are disabled
- D. The on-board ports have the wrong SFPs for the desired network protocol
正解: D
質問 32
An orphaned volume occurs during an asynchronous mirror implementation. You must recover the orphaned volume.
In this scenario, which statement is correct?
- A. Deactive the mirror consistency group that contains the orphan then re-enable the group
- B. Perform a role change on the orphan then re-create the mirroring relationship
- C. Remove the mirroring relationship on the orphan then re-create the mirroring relationship
- D. Suspend mirroring operations on the orphan then resume operations
正解: C
質問 33
Exhibit button.
Referring to the exhibit, what is the reason for the errors that are shown on port 5 on the switch of one of the fabrics?
- A. twisted cables, wrong plugs, or cable material
- B. protocol errors, encoding errors, or conversion errors
- C. wrong switch configuration
- D. faulty SFPs, cables, or patch panels
正解: B
質問 34
What file on a Windows management host server contains information about the storage system management connections?
- A. the event log
- B. mgmt.cfg
- C. EMWdata_vxx.bin
- D. AMWcfg_vxx.bin
正解: C
質問 35
Consult the ___________ to determine the current link status of a host port. (Choose the best answer.)
- A. Recovery Guru
- B. Storage Array Profile
- C. Real-time performance monitor
- D. Unreadable Sectorslog
正解: B
質問 36
When working on a customer's E-Series system to configure LDAP, you realize that you need to complete a Certificate Signing Request to receive a certificate.
In this scenario, when entering the information for the CSR, what information do you need from the controllers themselves? (Choose three.)
- A. the controller's common name
- B. the controller's alternate IP addresses
- C. the controller's alternate names
- D. the controller's serial number
- E. the controller's geographical location
正解: A,B,C
質問 37
What SANtricity package(s) must be installed on a Windows server when it is acting as both a data host and a storage management host?
- A. The client and agent
- B. The client
- C. The client, agent, and utilities
- D. The client, failover driver, and agent
正解: D
質問 38
Which interface is used to view and change the logical structure of a storage system? (Choose the best answer.)
- A. EMW
- B. Disk Manager
- C. VI
- D. Ldisk
- E. AMW
正解: E
質問 39
The ability of many E-Series controllers to hold an additional firmware image in reserve _________. (Choose the best answer.)
- A. is used to store a backup boot image
- B. is used for Support use only
- C. allows two firmware images to be used at the same time
- D. allows controller firmware to be downloaded immediately and activated at a later time
正解: C
質問 40
What would an E-Series system customer use to determine when a specific volume was deleted?
- A. Recovery Guru
- B. Event Log
- C. Storage Array Profile
- D. Online Help
正解: B
質問 41
What does a lit blue SAA LED indicate?
- A. It is safe to remove the component.
- B. The component has failed.
- C. The component is functioning normally.
- D. Power is turned on to the component.
正解: A
質問 42
With ALUA support, how does the storage system handle I/Os to the non-preferred path? (Choose the best answer.)
- A. They are accepted but maintained in cache with a special change log, and only processed after 5 minutes when volume ownership may be changed.
- B. They are shipped over to the owning controller to be managed, then returned through the non-preferred path after completion.
- C. They are rejected with a specific SCSI check condition.
- D. The controller handles them normally, updating both controllers' cache to maintain consistency, which is why ALUA requires cache mirroring to be enabled.
- E. The non-owning controller takes ownership of the volume in order to handle them, then restores ownership to the original controller.
正解: B
質問 43
What measurement refers to how much data can be handled in a given time period? (Choose the best answer.)
- A. Throughput
- B. Read modify write
- C. Parity
- D. I/O alignment
- E. IOPS
正解: A
質問 44
......
正真正銘のベスト資料NS0-516オンライン練習試験：https://jp.fast2test.com/NS0-516-premium-file.html
365日更新し続けるNS0-516最高の問題集はこちら：https://drive.google.com/open?id=1sa3v4rjTfNf1fPEn8SBh_TMYjhMDJ2G0