[2022年01月29日]NS0-516PDFで最近更新された問題です集試験点数を伸ばそう
NS0-516完全版問題集には無料PDF問題で合格させる
質問 32
How many partitions are being used in this storage system?
- A. 0
- B. 1
- C. 2
- D. 3
正解: A
質問 33
What mechanism governs control of the E-Series storage premium features? (Choose the best answer.)
- A. key file obtained from vendor and passed to system via SANtricity
- B. online database requiring the controllers to access the internet to activate features
- C. simple password system
- D. small toggle switches on the controller boards inside the system
- E. special USB flash drive that must be inserted into the controllers
正解: A
質問 34
When you replace a component, why should you wait for the action to register in the storage manager?
- A. To ensure that the storage manager completes the component repair sleep cycle
- B. To ensure that the administrator has time to complete ESD procedures
- C. To ensure that the host OS completes SOD processing
- D. To ensure that the controller configuration database has a record of the change
正解: D
質問 35
Your company has an E-Series system connected to Cisco MDS switches. You are asked to provision a volume on a new Windows host, but the Windows host is unable to connect to the volume on the E-Series system. All other Windows hosts in the fabric are able to connect to their volumes.
In this scenario, which three actions should you perform to accomplish this task? (Choose three.)
- A. Obtain the WWPN for the Windows HBA
- B. Create a new virtual SAN (VSAN)
- C. Create a single-initiator zone with the host and E-Series system
- D. Add a zone to the active zoneset
- E. Restart the switches
正解: A,D,E
質問 36
You are helping a customer diagnose a performance issue on an E-Series storage system. You decide to measure the amount of data that is being handled over the span of an hour.
In this scenario, what are you measuring?
- A. parity
- B. throughput
- C. I/O alignment
- D. IOPS
正解: B
質問 37
Which interface is used to view and change the logical structure of a storage system? (Choose the best answer.)
- A. EMW
- B. Disk Manager
- C. VI
- D. Ldisk
- E. AMW
正解: E
質問 38
Which component of an E-Series storage system should always be upgraded first? (Choose the best answer.)
- A. Controller firmware
- B. Controller NVSRAM
- C. ESM firmware
- D. SANtricity management client
正解: A
質問 39
How many 32 Gb ports are on one FC host interface card (HIC) on the NetApp E2800, EF280, E5700, and EF570 systems?
- A. 0
- B. 1
- C. 2
- D. 3
正解: C
質問 40
Which iSCSI setting would you change from its default value to increase the throughput of an iSCSI host port on a NetApp E-Series system?
- A. Time to Live (TTL)
- B. Challenge-Handshake Authentication Protocol (CHAP)
- C. maximum transmission unit (MTU)
- D. flow control
正解: C
質問 41
What does a lit blue SAA LED indicate?
- A. It is safe to remove the component.
- B. The component has failed.
- C. The component is functioning normally.
- D. Power is turned on to the component.
正解: A
質問 42
A customer has launched a data analytics initiative and has been transferring old data into the new data lake. The customer has discovered some data read errors during the transfer process.
In this scenario, how should the customer have avoided these data integrity issues?
- A. by turning on cyclic redundancy checks (CRCs)
- B. by deploying secure-capable drives
- C. by ensuring that data assurance and media scan are always activated
- D. by turning on erasure coding
正解: C
質問 43
A customer has an E5760 array with a 30-drive dynamic disk Pool (DDP) that uses 800 GB SSD drives.
The customer needs to expand the pool by one drive but has only a 1.6 TB SSD drive available.
In this scenario, what happens when the customer attempts to add the 1.6 TB drive to the existing pool?
- A. The pool is expanded by 1.6 T
- B. Online Proctored Whiteboard
- C. The pool is expanded by 1.6 TiB
- D. The pool is expanded by 800 GB
正解: D
質問 44
A Snapshot group contains one repository for which associated objects?
- A. Consistency groups
- B. Snapshot volumes
- C. Base volume files
- D. Snapshot images
正解: D
質問 45
Schedules for AutoSupport's periodic collection of data can be changed in the ________. (Choose the best answer.)
- A. Major Event Log
- B. Enterprise Management Window
- C. Array Management Window
- D. NVSRAM
正解: B
質問 46
Which three methods can be used to increase the space available to clients? (Choose three.)
- A. Convert RAID-6 volume group to RAID-5
- B. Replace some HDD with SSD
- C. Fill empty drive slots in the array
- D. Increase volume segment size
- E. Create new volume groups from unconfigured capacity
正解: C,D,E
質問 47
Which three connection types would be used between the host and the storage array in a switched environment? (Choose three.) Note: Answers to this question are not verified by our experts, please study yourself and select the appropriate answers.
Contribute: Please send the correct answers with reference text/link on [email protected] to get up to 50% cashback.
- A. direct attach
- B. Fibre Channel
- C. InfiniBand
- D. USB-C
- E. Ethernet
正解: B,C,D
質問 48
What is the minimum number of drives needed to create a Dynamic Disk Pool?
- A. 0
- B. 1
- C. 2
- D. 3
正解: A
質問 49
......
100%更新されたのはNetwork Appliance NS0-516限定版PDF問題集：https://jp.fast2test.com/NS0-516-premium-file.html
無料NCIE SAN E-Series NS0-516公式認定ガイドPDFダウンロード：https://drive.google.com/open?id=1sa3v4rjTfNf1fPEn8SBh_TMYjhMDJ2G0