[2025年02月26日]300-410究極な学習ガイド
究極なガイドで準備300-410認定試験CCNP Enterpriseは2025年更新
Cisco 300-410 試験は、企業ネットワークで高度なルーティングとサービスを実装するプロフェッショナルのスキルと知識を検証する認定試験です。ネットワークエンジニアやアーキテクトのスキルを強化したい人々にとって、最も人気のある試験の1つです。
質問 # 70
Refer to the exhibit.
Refer to the exhibit An enterprise operations team must monitor all application server traffic in the data center The team finds that traffic coming from the hub site from R3 and R6 rs monitored successfully but traffic destined to the application server is not monitored Which action resolves the issue?
- A.
- B.
- C.
- D.
正解：A
質問 # 71
Which configuration adds an IPv4 interface to an OSPFv3 process in OSPFv3 address family configuration?
- A. Router(config-if)#ospfv3 1 ipv4 area 0
- B. router ospfv3 1
address-family ipv4 - C. Router(config-router)#ospfv3 1 ipv4 area 0
- D. router ospfv3 1
address-family ipv4 unicast
正解：D
解説：
Section: Layer 3 Technologies
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_ospf/configuration/xe-3s/iro-xe-3s-book/ ip6-route-ospfv3-add-fam-xe.html
質問 # 72
Refer to the exhibit.
A network administrator has developed a Python script on the local Linux machine and is trying to transfer it to the router. However, the transfer fails. Which action resolves this issue?
- A. The SSH service must be enabled with the crypto key generate rsa command.
- B. The SCP service must be enabled with the ip scp server enable command.
- C. The SSH access must be allowed on the VTY lines using the transport input ssh command.
- D. The Python interpreter must first be enabled with the guestshell enable command.
正解：B
解説：
Explanation
The error "Administratively disabled" means we need to enable SCP on the router with the command:
Router(config)#ip scp server enable
質問 # 73
Refer to the exhibit.
The Math and Science departments connect through the corporate. IT router but users in the Math department must not be able to reach the Science department and vice versa Which configuration accomplishes this task?
- A. vrf definition Science
address-family ipv4
!
interface E 0/2
vrf forwarding Science
ip address 192.168.1.1 255.255.255.0
no shut
!
interface E 0/3
vrf forwarding Science
ip address 192.168.2.1 - B. vrf definition Science
address-family ipv4
!
interface E 0/2
ip address 192.168.1.1 255.255.255.0
vrf forwarding Science
no shut
!
interface E 0/3
ip address 192.168.2.1 255.255.255.0
vrf forwarding Science
no shut - C. vrf definition Science
address-family ipv4
!
interface E 0/2
ip address 192.168.1.1 255.255.255.0
no shut
!
interface E 0/3
ip address 192.168.2.1 255.255.255.0
no shut - D. vrf definition Science
interface E 0/2
ip address 192.168.1.1 255.255.255.0
no shut
interface E 0/3
ip address 192.168.2.1 255.255.255.0
no shut
正解：A
質問 # 74
Refer to the exhibits.
Phase-3 tunnels cannot be established between spoke-to-spoke in DMVPN. Which two commands are missing? (Choose two.)
- A. The ip nhrp shortcut command is missing on the spoke routers.
- B. The ip nhrp redirect command is missing on the spoke routers.
- C. The ip nhrp redirect command is missing on the hub router.
- D. The ip nhrp shortcut command is missing on the hub router.
- E. The ip nhrp map command is missing on the hub router.
正解：A、C
質問 # 75
Refer to the exhibit.
A network administrator is discovering a Cisco Catalyst 9300 and a Cisco WLC 3504 in Cisco DNA Center.
The Catalyst 9300 is added successfully However the WLC is showing [ error "uncontactable" when the administrator tries to add it in Cisco DNA Center. Which action discovers WLC in Cisco DNA Center successfully?
- A. Add the WLC 3504 under the hierarchy of the Catalyst 9300 connected devices.
- B. Copy the .pern file from the Cisco DNA Center on the USB and upload it to the WLC 3504.
- C. Delete the WLC 3504 from Cisco DNA Center and add it to Cisco DNA Center again.
- D. Copy the .cert file from the Cisco DNA Center on the USB and upload it to the WLC 3504.
正解：B
解説：
Explanation
https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-ce
質問 # 76
Refer to the exhibit.
- A.
- B.
- C.
- D.
正解：A
質問 # 77
Refer to the exhibit.
Which configuration denies Telnet traffic to router 2 from 198A:0:200C::1/64?
- A. Ipv6 access-list-Deny_Telnet sequence 10 deny tcp host 198A:0:200C::1/64 host
201A:0:205C::1/64 eq telnet
! int Gi0/0
6 / 39
Ipv6 traffic-filter Deny_Telnet in
! - B. Ipv6 access-list-Deny_Telnet sequence 10 deny tcp host 198A:0:200C::1/64 host
201A:0:205C::1/64 ! int Gi0/0
Ipv6 traffic-filter Deny_Telnet in
! - C. Ipv6 access-list-Deny_Telnet sequence 10 deny tcp host 198A:0:200C::1/64 host
201A:0:205C::1/64 eq telnet
! int Gi0/0
Ipv6 access-map Deny_Telnet in
! - D. Ipv6 access-list-Deny_Telnet sequence 10 deny tcp host 198A:0:200C::1/64 host
201A:0:205C::1/64 ! int Gi0/0
Ipv6 access-map Deny_Telnet in
!
正解：A
質問 # 78
Refer to Exhibit.
Which two configurations allow clients to get dynamic ip addresses assigned?
- A. Configure access-list 100 permit udp any any eq 69 as the first line
- B. Configure access-list 100 permit udp any any eq 61 as the first line
- C. Configure access-list 100 permit udp any any eq 86 as the first line
- D. Configure access-list 100 permit udp any any eq 67 as the first line
- E. Configure access-list 100 permit udp any any eq 68 as the first line
正解：D、E
質問 # 79
Exhibit:
Bangkok is using ECMP to reach to the 192.168.5.0/24 network. The administrator must configure Bangkok in such a way that Telnet traffic from 192.168.3.0/24 and192.168.4.0/24 networks uses the HongKong router as the preferred router. Which set of configurations accomplishes this task?
- A. access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255
!
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.18.1.2
interface Ethernet0/3
ip policy route-map PBR1 - B. access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255
!
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.18.1.2
!
interface Ethernet0/1
ip policy route-map PBR1 - C. access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23 access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23
!
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.18.1.2
!
interface Ethernet0/3
ip policy route-map PBR1 - D. access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23 access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23
!
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.18.1.2
interface Ethernet0/1
ip policy route-map PBR1
正解：C
解説：
Explanation
We need to use Policy Based Routing (PBR) here on Bangkok router to match the traffic from 192.168.3.0/24
& 192.168.4.0/24 and "set ip next-hop" to HongKong router(172.18.1.2 in this case).
Note: Please notice that we have to apply the PBR on incoming interface e0/3 to receive traffic from
192.168.3.0/24 and 192.168.4.0/24.
質問 # 80
An engineer must establish a connection between two CE routers for two customers with overlapping IP addresses Customer_a is connected to interfaces Gig0/0, and Customer_b is connected to interfaces Gig0/1.
Routers CE1 and CE2 are configured as follows:
Drag and drop the code snippets from the right onto the boxes in the configuration to establish the needed connection. Snippets may be used more than once.
正解：
解説：
Explanation
質問 # 81
Refer to the exhibit. R5 should not receive any routes originated in the EIGRP domain.
Which set of configuration changes removes the EIGRP routes from the R5 routing table to fix the issue?
- A. R4
route-map O2R deny 10
match tag 111
!
router rip
redistribute ospf 1 route-map O2R metric 1 - B. R2
route-map E20 deny 20
R4
route-map O2R deny 10
match tag 111
!
router rip
redistribute ospf 1 route-map O2R metric 1 - C. R4
route-map O2R permit 10
match tag 111
route-map O2R deny 20
!
router rip
redistribute ospf 1 route-map O2R metric 1 - D. R4
route-map O2R deny 10
match tag 111
route-map O2R permit 20
!
router rip
redistribute ospf 1 route-map O2R metric 1
正解：D
質問 # 82
Drag and drop the DHCP messages from the left onto the correct uses on the right.
正解：
解説：
Reference:
DHCPINFORM: If a client has obtained a network address through some other means or has a manually configured IP address, a client workstation may use a DHCPINFORM request message to obtain other local configuration parameters, such as the domain name and Domain Name Servers (DNSs). DHCP servers receiving a DHCPINFORM message construct a DHCPACK message with any local configuration parameters appropriate for the client without allocating a new IP address. This DHCPACK will be sent unicast to the client.
DHCPNAK: If the selected server is unable to satisfy the DHCPREQUEST message, the DHCP server will respond with a DHCPNAK message. When the client receives a DHCPNAK message, or does not receive a response to a DHCPREQUEST message, the client restarts the configuration process by going into the Requesting state. The client will retransmit the DHCPREQUEST at least four times within 60 seconds before restarting the Initializing state.
DHCPACK: After the DHCP server receives the DHCPREQUEST, it acknowledges the request with a DHCPACK message, thus completing the initialization process.
DHCPDECLINE: The client receives the DHCPACK and will optionally perform a final check on the parameters. The client performs this procedure by sending Address Resolution Protocol (ARP) requests for the IP address provided in the DHCPACK. If the client detects that the address is already in use by receiving a reply to the ARP request, the client will send a DHCPDECLINE message to the server and restart the configuration process by going into the Requesting state.
https://www.cisco.com/c/en/us/support/docs/ip/dynamic-address-allocation-resolution/27470-100.html
質問 # 83
Refer to the exhibit. An engineer implements uRPF to increase security and stop incoming spoofed IP packets. Same asymmetrically routed packets are also blocked after the configuration.
Which command resolves the issue?
- A. ip verify unicast source reachable-via rx
- B. ip verify unicast reverse-path any
- C. ip verify unicast source reachable-via any
- D. ip verify unicast reverse-path
正解：C
質問 # 84
Refer to the exhibit.
In which circumstance does the BGP neighbor remain in the idle condition?
- A. if prefixes are not received from the BGP peer
- B. if a prefix list is applied on the inbound direction
- C. if prefixes exceed the maximum limit
- D. if prefixes reach the maximum limit
正解：D
解説：
Explanation
https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/25160-bgp-maximum-prefix.html#
質問 # 85 
Refer to the exhibit. A network administrator configured an IPv6 access list to allow TCP return traffic only, but it is not working as expected. Which changes resolve this issue?
- A. ipv6 access-list inbound
permit tcp any any syn
deny ipv6 any any log
!
interface gi0/0
ipv6 traffic-filter inbound in - B. ipv6 access-list inbound
permit tcp any any established
deny ipv6 any any log
!
interface gi0/0
ipv6 traffic-filter inbound out - C. ipv6 access-list inbound
permit tcp any any syn
deny ipv6 any any log
!
interface gi0/0
ipv6 traffic-filter inbound out - D. ipv6 access-list inbound
permit tcp any any established
deny ipv6 any any log
!
interface gi0/0
ipv6 traffic-filter inbound in
正解：D
質問 # 86
Which of the following correctly describes the concept of split horizon with IP routing? (Choose two.)
- A. Split horizon is a valid routing loop prevention mechanism
- B. Split horizon is used to filter customer routes in an ISP network.
- C. Split horizon is not applicable to EIGRP networks
- D. When enabled, split horizons informs the router to not advertise routes back out the same interface from where that route was originally received.
- E. Split horizons cannot be disabled on WAN interfaces
正解：A、D
質問 # 87
Refer to the exhibit.
After redistribution is enabled between the routing protocols; PC2, PC3, and PC4 cannot reach PC1. Which action can the engineer take to solve the issue so that all the PCs are reachable?
- A. Redistribute the directly connected interfaces on R2.
- B. Filter the prefix 10.1.1.0/24 when redistributed from RIP to EIGRP.
- C. Set the administrative distance 100 under the RIP process on R2.
- D. Filter the prefix 10.1.1.0/24 when redistributed from OSPF to EIGRP.
正解：C
質問 # 88
An engineer configured access list NON-CISCO in a policy to influence routes
What are the two effects of this route map configuration? (Choose two.)
- A. Packets are evaluated by sequence 10.
- B. Packets are not evaluated by sequence 10.
- C. Packets are dropped by the access list.
- D. Packets are forwarded using normal route lookup.
- E. Packets are forwarded to the default gateway.
正解：A、E
質問 # 89
A company is looking to implement VPN between their Head Quarter and over 100+ Branch Offices. They are looking for a solution that:
1. Reduces deployment complexity
2. Simplifies branch communications
3. Offers branch to branch connectivity.
4. Is cost effective
5. Offers strong encryption
Select the best option from the below options that you would recommend to implement.
- A. MPLS
- B. DMVPN
- C. IPSEC
- D. GRE
正解：B
質問 # 90
The network administrator configured R1 to authenticate Telnet connections based on Cisco ISE using TACACS+. ISE has been configured with an IP address of 192.168.1.5 and with a network device pointing toward R1(192.168.1.1) with a shared secret password of Cisco123.
The administrator cannot authenticate to R1 based on ISE. Which configuration fixes the issue?
- A. line vty 0 4
login authentication telnet - B. ip tacacs-server host 192.168.1.5 key Cisco123
- C. tacacs-server host 192.168.1.5 key Cisco123
- D. line vty 0 4
login authentication TAC-SERV
正解：A
解説：
Explanation
The last command "aaa authentication login telnet group TAC-SERV" created the method list name telnet so we need to assign it to line vty.
Reference: https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/200208- Configure-ISE-2-0-IOS-TACACS-Authentic.html
質問 # 91
Refer to the exhibit.
An engineer is troubleshooting BGP on a device but discovers that the clock on the device does not correspond to the time stamp of the log entries. Which action ensures consistency between the two times?
- A. Configure the logging clock synchronize command in global configuration mode.
- B. Configure the service timestamps log datetime localtime command in global configuration mode.
- C. Make sure that the clock on the device is synchronized with an NTP server.
- D. Configure the service timestamps log uptime command in global configuration mode.
正解：D
解説：
Explanation
https://community.cisco.com/t5/networking-documents/router-log-timestamp-entries-are-different-from-the-syste
質問 # 92
......
Cisco 300-410試験は、Cisco Certified Specialist -Enterprise Advanced Infrastructure実装認証の一部であり、エンタープライズネットワークで高度なルーティングテクノロジーとサービスを実装するスキルを検証したいITプロフェッショナル向けに設計されています。この試験では、高度なルーティングプロトコル、サービス品質（QOS）、仮想プライベートネットワーク（VPNS）、ネットワーク自動化など、エンタープライズルーティングとサービスに関連する幅広いトピックをカバーしています。
CCNP Enterprise基礎問題300-410試験練習問題集：https://jp.fast2test.com/300-410-premium-file.html
リアル300-410問題集でCisco明確な解答を試そう：https://drive.google.com/open?id=1r22EN5ItOwvQtswIdaeGaoEszCrpFCtL