本日更新の2025年03月試験エンジンとPDF 300-410テスト無料！
究極のガイド準備300-410正確なPDF解答
Cisco 300-410（Cisco Enterprise Advanced Routing and Servicesの実装）認定試験は、高度なルーティングテクノロジーとサービスの知識とスキルを検証したいネットワークの専門家にとって挑戦的で報酬のある認証です。認定試験は、複雑なエンタープライズネットワークインフラストラクチャを構成およびトラブルシューティングする候補者の能力をテストするように設計されており、成功した候補者には、Cisco認定スペシャリスト - エンタープライズアドバンスインフラストラクチャ実装認証が授与されます。認定試験は、エンタープライズネットワーキングでキャリアを進めたいネットワークの専門家にとって不可欠な資格であり、継続的な学習と専門能力開発へのコミットメントを示しています。
Cisco 300-410試験は、ネットワーキングテクノロジーとエンタープライズネットワークの実装と管理の経験を強く理解している専門家を対象としています。候補者は、OSPF、EIGRP、BGPなどのルーティングプロトコル、およびNAT、DHCP、VPNなどのネットワークサービスを構成およびトラブルシューティングする機能を確実に理解する必要があります。さらに、候補者は、ネットワーク自動化ツールとテクニックの経験、および高度に利用可能でスケーラブルなネットワークソリューションを設計および実装する機能を備えている必要があります。 Cisco 300-410試験に合格することは、エンタープライズネットワーキングでのキャリアを促進しようとしているIT専門家にとって貴重な成果です。
質問 # 320
A network engineer needs to verify IP SLA operations on an interface that shows on indication of excessive traffic.
Which command should the engineer use to complete this action?
- A. show frequency
- B. show threshold
- C. show reachability
- D. show track
正解：D
質問 # 321
White working with software images, an engineer observes that Cisco DNA Center cannot upload its software image directly from the device. Why is the image not uploading?
- A. The device must be resynced to Cisco DNA Center
- B. The software image for the device is in install mode.
- C. The device has lost connectivity to Cisco DNA Center.
- D. The software image for the device is in bundle mode
正解：B
解説：
When a device is in Install Mode, Cisco DNA Center is unable to upload its software image directly from the device. When a device is in install mode, you must first manually upload the software image to the Cisco DNA Center repository before marking the image as golden.
Reference: https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network- automation-and-management/dna-center/1-
3/user_guide/b_cisco_dna_center_ug_1_3/b_cisco_dna_center_ug_1_3_chapter_0100.html
質問 # 322
A company is expanding business by opening 35 branches over the Internet. A network engineer must configure DMVPN at the branch routers to connect with the hub router and allow NHRP to add spoke routers securely to the multicast NHRP mappings automatically Which configuration meets this requirement at the hub router?
A)
B)
C)
D)
- A. Option B
- B. Option A
- C. Option C
- D. Option D
正解：C
質問 # 323
The summary route is not shown in the RouterB routing table after this below configuration on Router_A
.
Which Router_A configuration resolves the issue by advertising the summary route to Router B?
- A. Option A
- B. Option C
- C. Option B
- D. Option D
正解：C
質問 # 324
Refer to the exhibit.
After redistribution is enabled between the routing protocols; PC2, PC3, and PC4 cannot reach PC1. Which action can the engineer take to solve the issue so that all the PCs are reachable?
- A. Set the administrative distance 100 under the RIP process on R2.
- B. Filter the prefix 10.1.1.0/24 when redistributed from RIP to EIGRP.
- C. Filter the prefix 10.1.1.0/24 when redistributed from OSPF to EIGRP.
- D. Redistribute the directly connected interfaces on R2.
正解：C
質問 # 325
Refer to the exhibit.
R5 should not receive any routes originated in the EIGRP domain. Which set of configuration changes removes the EIGRP routes from the R5 routing table to fix the issue?
- A. R2
route-map E20 deny 20
R4
route-map O2R deny 10
match tag 111
!
router rip
redistribute ospf 1 route-map O2R metric 1 - B. R4
route-map O2R deny 10
match tag 111
!
router rip
redistribute ospf 1 route-map O2R metric 1 - C. R4
route-map O2R deny 10
match tag 111
route-map O2R permit 20
!
router rip
redistribute ospf 1 route-map O2R metric 1 - D. R4
route-map O2R permit 10
match tag 111
route-map O2R deny 20
!
router rip
redistribute ospf 1 route-map O2R metric 1
正解：C
解説：
In this question, routes from EIGRP domain are redistributed into OSPF (with tag 111) then RIPv2 but without any filtering so R5 learns all routes from both EIGRP and OSPF domain. If we only want R5 to learn routes from OSPF domain then we must filter out routes with tag 111 and permit other routes.
The line "route-map O2R permit 20" is important to allow other routes because of the implicit deny all at the end of each route-map.
質問 # 326
Refer to the exhibit.
An engineer is troubleshooting a failed Telnet session from PC to the DHCP server. Which action resolves the issue?
- A. Remove sequence 30 and add it back to the IPv6 traffic filter as sequence 5.
- B. Remove sequence 20 for sequence 40 in the access list to allow Telnet.
- C. Remove sequence 20 and add it back to the IPv6 traffic filter as sequence 5.
- D. Remove sequence 10 to add the PC source IP address and add it back as sequence 10.
正解：D
質問 # 327
Drag and drop the actions from the left into the correct order on the right to configure a policy to avoid following packet forwarding based on the normal routing path.
正解：
解説：
質問 # 328
An engineer creates a Cisco DNA Center cluster with three nodes, but all the services are running on one host node.
Which action resolves this issue?
- A. Click the master host node with all the services and select services to be moved to other hosts
- B. Enable service distribution from the Systems 360 page.
- C. Restore the link on the switch interface that is connected to a cluster link on the Cisco DNA Center
- D. Click system updates, and upgrade to the latest version of Cisco DNA Center.
正解：B
質問 # 329
A network administrator cannot connect to a device via SSH. The line vty configuration is as follows:
Which action resolves this issue?
- A. Change the stopbits to 10.
- B. Increase the session timeout
- C. initialize the SSH key
- D. Configure the transport input SSH
正解：C
質問 # 330
Refer to the exhibit. A network administrator is trying to switch to the privileged EXEC level on R1 but failed. Which configuration resolves the issue?
- A. enable-password Cisco@123
- B. tacacs-server enable-password Cisco@123
- C. Enable password Cisco@123
- D. tacass server enable-password Cisco@123
正解：A
質問 # 331
The implementations group has been using the test bed to do a 'proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, and FHRP services, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.
Use the supported commands to isolated the cause of this fault and answer the following questions.
What is the solution to the fault condition?
- A. In Configuration mode, using the interface port-channel 13 command, then configure switchport trunk allowed vlan none followed by switchport trunk allowed vlan 20,200 commands.
- B. In Configuration mode, using the interface port-channel 13, port-channel 23, then configure switchport trunk none allowed vlan none followed by switchport trunk allowed vlan 10,200 commands.
- C. In Configuration mode, using the interface port-channel 23, port-channel, then configure switchport trunk allowed vlan none followed by switchport trunk allowed vlan 10,20,200 commands.
- D. In Configuration mode, using the interface port-channel 23 command, then configure switchport trunk allowed vlan none followed by switchport trunk allowed vlan 20,200 commands.
正解：B
解説：
We need to allow VLANs 10 and 200 on the trunks to restore full connectivity. This can be accomplished by issuing the "switchport trunk allowed vlan 10,200" command on the port channels used as trunks in DSW1.
Mixed Questions
Question Set 1
質問 # 332
Refer to the exhibit. An engineer must redistribute networks 192.168.10.0/24 and
192.168.20.0/24 into OSPF from EIGRP. Where the metric must be added when traversing through multiple hops to start an external route of 20. The engineer notices that the external metric is fixed and does not add at each hop. Which configuration resolves the issue?
- A. R1(config)#access-list 10 permit 192.168.10.0 0.0.0.255
(config)#access-list 10 permit 192.168.20.0 0.0.0.255 !
R1(config)#route-map RD permit 10
R1(config-route-map)#match ip address 10
R1(config-route-map)#set metric 20
R1(config-route-map)#set metric-type type-1 !
R1(config)#router ospf 10
R1(config-router)#redistribute eigrp 10 subnets route-map RD - B. R1(config)#access-list 10 permit 192.168.10.0 0.0.0.255
R1(config)#access-list 10 permit 192.168.20.0 0.0.0.255 !
R1(config)#route-map RD permit 10
R1(config-route-map)#match ip address 10
R1(config-route-map)#set metric 20
R1(config-route-map)#set metric-type type-2 !
R1(config)#router ospf 10
R1(config-router)#redistribute eigrp 10 subnets route-map RD - C. R2(config)#access-list 10 permit 192.168.10.0 0.0.0.255
R2(config)#access-list 10 permit 192.168.20.0 0.0.0.255 !
R2(config)#route-map RD permit 10
R2(config-route-map)#match ip address 10
R2(config-route-map)#set metric 20
R2(config-route-map)#set metric-type type-1 !
R2(config)#router ospf 10
R2(config-router)#redistribute eigrp 10 subnets route-map RD - D. R2(config)#access-list 10 permit 192.168.10.0 0.0.0.255
R2(config)#access-list 10 permit 192.168.20.0 0.0.0.255 !
R2(config)#route-map RD permit 10
R2(config-route-map)#match ip address 10
R2(config-route-map)#set metric 20
R2(config-route-map)#set metric-type type-2 !
R2(config)#router ospf 10
R2(confjg-router)#redistribute eigrp 10 subnets route-map RD
正解：C
質問 # 333
Refer to the exhibit.
A network administrator configured an IPv6 access list to allow TCP return frame only, but it is not working as expected. Which changes resolve this issue?
- A. Option B
- B. Option A
- C. Option C
- D. Option D
正解：C
解説：
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750/software/release/122_55_se/configuration/guid
質問 # 334
How is VPN routing information distributed in an MPLS network?
- A. It is controlled using of VPN target communities.
- B. The top level of the customer data packet directs it to the correct CE device
- C. It is controlled through the use of RD.
- D. It is established using VPN IPsec peers.
正解：B
質問 # 335
......
Cisco 300-410認定試験に合格する候補者は、高度なルーティングおよびサービス技術についての深い理解を獲得し、複雑な企業ネットワークを設計、実装、トラブルシューティングすることができます。この認定は、保持者が高度なルーティングおよびサービス技術を扱うために必要なスキルと知識を持っていることを証明するため、雇用主から高く評価されています。
合格させるCiscoはFast2test試験問題集：https://jp.fast2test.com/300-410-premium-file.html
完全版最新の300-410問題集で100%カバー率問題と解答があなたをリアル試験で合格させる：https://drive.google.com/open?id=1wrvEsW-rxaZ7dzaJtMrIPkK7aVkU1V9z