[2024年11月15日] 更新されたNS0-184試験PDF問題集にはFast2test合格保証付き
あなたを合格させるNetwork Appliance試験にはNS0-184試験問題集
質問 # 11
A customer has a current AFF ASA A700 cluster and they want to expand the cluster by adding a second AFF ASA A700 HA pair.
In this scenario, which step would be required to accomplish this task?
- A. The customer will need to create a separate cluster for the second AFF ASA A700 pair.
- B. Install a BES-53248 cluster switch and convert the AFF ASA A700 from a switchless to switch cluster.
- C. Install a Brocade FC switch and create zoning between the original cluster and the new cluster.
- D. Enable ALUA between the two HA pairs to allow cluster backend traffic.
正解：B
質問 # 12
You are planning to install a new ONTAP 9.7 All SAN Array (ASA) into your existing data center.
In this scenario, which cluster configuration is allowed with ASA controllers?
- A. ASA controllers can only be installed as a standalone HA pair.
- B. Add the ASA controllers to an existing 4-node cluster with NAS licenses.
- C. ASA controllers can only be added to clusters that have existing SAN licenses.
- D. Add the ASA controllers to an existing 10-node cluster.
正解：C
質問 # 13
You are installing a new AFF A400 cluster and need to access the cluster management LIF from a remote subnet with the fully qualified domain name (FQDN) a400.lab.netapp.com.
In this scenario, which two network components must be configured to log in to ONTAP System Manager from the remote subnet? (Choose two.)
- A. route
- B. DNS
- C. NTP
- D. VLAN
正解：A、B
質問 # 14
Your customer wants to know more about the network configuration within the cluster.
In this scenario, which statement is correct about a LIF?
- A. A LIF is a port that provides physical connections.
- B. A LIF separates network domains to access cluster data.
- C. A LIF is an IP address or a WWPN that is associated with a port.
- D. A LIF is created within a broadcast domain and contains a pool of IP address.
正解：C
質問 # 15
You need to install a cluster with a FAS2720 HA pair and a FAS8300 HA pair.
Which NetApp tool will verify which cluster interconnect switches support this configuration?
- A. Interoperability Matrix Tool (IMT)
- B. mysupport.netapp.com site
- C. Active IQ Config Advisor
- D. Hardware Universe (HWU)
正解：D
質問 # 16
You are installing a 4-node AFF A400 cluster and are asked to create a custom security message before and after user login.
Which two security features are used to perform this task? (Choose two.)
- A. AutoSupport
- B. banner
- C. EMS
- D. motd
正解：A、B
質問 # 17
An ONTAP cluster is installed at a secure site. The array has no access to the Internet but is managed 24/7 by onsite engineers. The customer requires that when hardware failures occur, the failures are reported to the NetApp Support team as quickly as possible.
In this scenario, which two tasks should be performed during the project hand-off procedure to satisfy the customer's requirement? (Choose two.)
- A. Ensure that the onsite engineers receive EMS alerts when hardware issues occur.
- B. Educate the onsite engineer about how to manually log support calls.
- C. Educate the onsite engineers about invoking the AutoSupport tool from ONTAP System Manager.
- D. Ensure that Active IQ Config Advisor is installed.
正解：A、C
質問 # 18
Click the Exhibit button.
After installation of a new ONTAP cluster, you experience a problem. You successfully create a support case on the NetApp Support site. The customer asks you how to view the status of the case.
Referring to the exhibit, which two steps would allow the customer to accomplish this task? (Choose two.)
- A. Open My Cases, and select Create a Case.
- B. Open https://support.netapp.com, using the customer credentials.
- C. Open https://support.netapp.com, using the partner credentials.
- D. Open My Cases, and select the 41747189 case number.
正解：B、D
質問 # 19
You are installing an AFF A700 system with two disk shelves using ADPv2. After setting up the cluster, you realize that one drive shelf was powered off and that the drives have not been assigned to any of the nodes.
In this scenario, which two resources will help you find a solution? (Choose two.)
- A. Active IQ Config Advisor
- B. NetApp Documentation Center
- C. NetApp Knowledge Base
- D. Active IQ Digital Advisor
正解：A、C
質問 # 20
You are deploying an 8-node AFF A700 by using BES-53248 cluster switches. During the installation, you notice that ports higher than 16 are not coming online. You verify that the additional licenses are installed.
Which two additional steps must be taken to bring the additional ports online? (Choose two.)
- A. Reload the RCF file
- B. Re-enable each port
- C. Reload the firmware
- D. Reload the switch
正解：A、D
質問 # 21
A customer wants to enable SnapMirror Synchronous across their environment. The customer must ensure that SnapMirror Synchronous will work across the environment.
In this scenario, which two statements are true? (Choose two.)
- A. A SnapMirror Synchronous license is required on the source cluster.
- B. A SnapMirror license is required on both the source cluster and the destination cluster.
- C. A SnapMirror license is not required on both the source cluster and the destination cluster.
- D. A SnapMirror Synchronous license is required on both the source and destination clusters.
正解：C、D
質問 # 22
Click the Exhibit button.
During an ONTAP cluster handover procedure, your customer asks how to identify and solve issues that might occur on the newly deployed array.
Referring to the exhibit, which two widgets would the customer use to help with these issues? (Choose two.)
- A. Contracts and Warranties
- B. ASE Corner
- C. Active IQ
- D. Guide Me
正解：A、D
質問 # 23
You have installed a new 2-node FAS9000 cluster with two external shelves. You want to make sure that each node has two paths to each disk in the shelves.
How do you verify your configuration?
- A. Use the storage disk option show command.
- B. Use the sysconfig command.
- C. Use the disk show -fields initiator command.
- D. Use the storage show disk -p command.
正解：C
質問 # 24
You are setting up a new AFF A400 that will serve iSCSI LUNs. You will have four iSCSI SVMs that each need to connect to an Internet Storage Name Service (iSNS) for discovery and management purposes.
In this scenario, which network interface is needed for each SVM to register with the name service?
- A. SVM data LIF
- B. node management LIF
- C. intercluster LIF
- D. SVM management LIF
正解：C
質問 # 25
You want to add an AFF A400 HA pair to an existing cluster.
In this scenario, which LIF type is required?
- A. data
- B. node-mgmt
- C. intercluster
- D. cluster-mgmt
正解：C
質問 # 26
You are preparing for the installation of a new ONTAP 9.8 cluster and need to get the preinstallation information from the customer.
In this scenario, which NetApp tool would you use to create a configuration spreadsheet template for the deployment?
- A. Active IQ Unified Manager
- B. ConfigBuilder
- C. Interoperability Matrix Tool
- D. Active IQ Config Advisor
正解：C
質問 # 27
You have an AFF All SAN Array (ASA) cluster that is running ONTAP 9.7. The cluster is configured for Active Directory domain controller access using a domain tunnel.
In this scenario, which two licenses are enabled on the cluster? (Choose two.)
- A. NVMe
- B. CIFS
- C. FCP
- D. iSCSI
正解：B、C
質問 # 28
You completed an ONTAP cluster deployment as a reseller engineer. During the knowledge transfer process to the customer, they ask for proof that the array has correct multi-path HA cabling deployed and that the array is error free.
Which documentation output would you present to the customer to satisfy this requirement?
- A. Active IQ Unified Manager output
- B. Active IQ OneCollect output
- C. Config Advisor output
- D. NetAppDocs output
正解：C
質問 # 29
A customer is creating a new SVM to host iSCSI LUNs for a Hyper-V cluster. You need to successfully map the new LUNs and make them visible to the Hyper-V cluster.
In this scenario, which host information is required to accomplish this task?
- A. WWPNs
- B. host names
- C. WWNNs
- D. IQNs
正解：B
質問 # 30
You use the system health subsystem show command to troubleshoot your newly installed ONTAP cluster.
In this scenario, which two health outputs would this command show you? (Choose two.)
- A. shelf connectivity
- B. node CPU utilization
- C. cluster switch cabling
- D. data switch cabling
正解：A、B
質問 # 31
You have just racked a new 6-node switched cluster with ONTAP 9.7. You need to configure the cluster switches.
In this scenario, which two elements would be used to complete the configuration? (Choose two.)
- A. SSH
- B. SFP+ port
- C. serial port
- D. rlogin
正解：A、C
質問 # 32
An administrator issued the cluster setup command and configured a 2-node ONTAP 9.8 cluster.
In this scenario, which tool would the administrator use to validate the configuration?
- A. NetAppDocs
- B. Active IQ Upgrade Advisor
- C. Interoperability Matrix Tool
- D. Active IQ Config Advisor
正解：A
質問 # 33
You want to enable secure communication with the SP or BMC through CA-signed certificates.
Which two certificate types must be installed in this scenario? (Choose two.)
- A. ONTAP certificate
- B. cluster certificate
- C. root CA certificate
- D. server certificate
正解：C、D
質問 # 34
You are expanding an existing cluster that uses BES-53248 cluster interconnect switches. You connected the new controllers to ports 0/17 through 0/20. However, you are unable to join the new nodes to the cluster.
Which action must be taken to solve the problem?
- A. Reboot the controllers.
- B. Install the CSHM configuration file.
- C. Install the reference configuration file.
- D. Install the license file.
正解：C
質問 # 35
......
最新でリアルなNS0-184試験問題集解答：https://jp.fast2test.com/NS0-184-premium-file.html
NS0-184試験問題集でNetwork Appliance練習テスト問題：https://drive.google.com/open?id=1_xqFu2CgNvHpPcjbDhw19UwC1dW80OUh