[2024年08月最新リリース]1z0-996-22試験問題はあなたをパスさせる
Oracle 1z0-996-22試験基本問題とアンサー
Oracle 1z0-996-22試験は、Oracle Utilities Customer Cloud Service 2022の実装に関連するさまざまなトピックをカバーしています。これらのトピックには、システムアーキテクチャ、データ移行、構成、カスタマイズ、および統合が含まれます。候補者は、これらのトピックについて深い理解を持ち、その知識を実世界のシナリオに適用できることが期待されています。さらに、試験では、Oracle Utilities Customer Cloud Serviceに関連するトラブルシューティングおよび問題解決能力を測定します。
Oracle 1z0-996-22試験は、Oracle Utilities Customer Cloud Service 2022 Implementationの認定を求めるプロフェッショナル向けに設計されています。この試験は、候補者がOracle Utilities Customer Cloud Service 2022を実装するための知識とスキルをテストすることを意図しています。この試験は、顧客管理、請求書発行、回収、およびメーター読み取りなど、幅広いトピックをカバーしています。この試験に合格することで、候補者が専門的な設定でOracle Utilities Customer Cloud Service 2022を実装するために必要な専門知識を持っていることが証明されます。
質問 # 28
Critical validation rules verify the integrity of the initial measurement data (IMD). If an implementation needs to add new critical validations, where would you configure them?
- A. as new lifecycle algorithms on the IMD Seeder BO (D1-IMDSeeder)
- B. as options on the IMD Seeder BO (D1-IMDSeeder)
- C. in the pre-processing algorithm of the IMD Seeder BO (Dl-IMDSeeder)
- D. in the schema of the IMD Seeder BO (D1-IMDSeeder)
- E. in the validation algorithm on the IMD Seeder BO (D1-IMDSeeder)
正解：C
質問 # 29
What happens when a device's measuring components are reconfigured (a new measuring component will be read) at a service point?
- A. The original installation event is updated with the "removal" (expire old device configuration).
- B. A device with a new configuration type is created.
- C. A device with a new configuration type is created. Moreover, a new installation event is created to 'install" (new device configuration).
- D. A new installation event is created to "install" (new device configuration).
- E. The original installation event is updated with the "removal" (expire old device configuration) and a new installation event is created to "install" (new device configuration).
正解：E
質問 # 30
Which three initial measurement data (IMD) exception categories are available when you execute VEE rules?
(Choose three.)
- A. Information
- B. Issue
- C. Terminate
- D. Complete
- E. Low
正解：A、B、E
解説：
Initial measurement data (IMD) exception categories are the groupings of exceptions for an IMD based on their functional similarity1. They provide a way to define VEE exceptions in a distinct enough way to understand the root issue that was generated from the VEE rule. The following are the three IMD exception categories that are available when you execute VEE rules:
Issue: This category indicates that there is a problem with the IMD that needs to be resolved before it can be used for further processing. For example, an IMD might have an issue exception if it has a missing or invalid identifier, a missing or invalid date/time, a missing or invalid UOM, or a missing or invalid status2.
Low: This category indicates that the IMD value is lower than expected based on the previous values or the configured thresholds. For example, an IMD might have a low exception if it has a negative consumption, a zero consumption, a low consumption, or a low demand2.
Information: This category indicates that the IMD value is valid but has some additional information that might be useful for analysis or reporting. For example, an IMD might have an information exception if it has a rollover, a reset, a leap year adjustment, or a daylight saving time adjustment2. References:
1: Understanding Exception Types
2: Configuring Exception Types
質問 # 31
What determines an Account's Balance?
- A. the logic defined in a plug-in spot on the Installations Option
- B. the sum of all the Financial Transactions linked directly to theservice agreements related to the account
- C. the sum of all the balances recorded in the "Balance Due" field on each serviceagreement related to the account
- D. the sum of all the Financial Transactions linked directly to the account
- E. the amount recorded in the "Balance Due" field on an account
正解：D
解説：
An account's balance is the total amount of money that the account owes or is owed by the utility1. An account's balance is determined by the sum of all the financial transactions linked directly to the account2. Financial transactions are records of monetary events that affect an account, such as charges, payments, adjustments, or refunds3. Financial transactions can be linked to an account directly or indirectly through a service agreement. However, only the financial transactions that are linked directly to the account are used to calculate the account's balance2. Therefore, the correct answer is E. the sum of all the Financial Transactions linked directly to the account. References:
About Accounts
About Account Balances
About Financial Transactions
[Understanding Financial Transaction Linkage]
質問 # 32
Your implementation requires an installation of two types of devices:
Electric Smart Meter
Gas Manual Meter
Which two Device Type attributes are required to identify these device types? (Choose two.)
- A. Service Type
- B. Device Business Object
- C. Manufacturer
- D. Valid Measuring Component Types
- E. Serial Number
正解：A、D
質問 # 33
Measuring components are either subtractive or consumptive.
Whichstatement correctly describes these two concepts?
- A. Subtractive measuring components are used to measure demand, whereas consumptive measuring components are used to measure how much was consumed since the previous reading.
- B. Subtractive measuring components are associated with deductive meters, whereas consumptive measuring components are not.
- C. A subtractive measuring component's consumption for a given period of time is the end measurement minus the start measurement. A consumptive measuring component's consumption is simply the measurement itself, and represents the consumption for the period of time since the previous measurement was taken.
- D. Subtractive measuring components are associated only with water service, whereas consumptive measuring components are for gas and electric services.
正解：C
解説：
According to the Oracle Utilities Customer Cloud Service User Guides, a subtractive measuring component is one that records the cumulative usage of a service point or a device over time1. A consumptive measuring component is one that records the usage of a service point or a device for a specific interval of time2. The difference between these two types of measuring components is how the consumption is calculated. For a subtractive measuring component, the consumption for a given period of time is the end measurement minus the start measurement1. For a consumptive measuring component, the consumption is simply the measurement itself, and represents the consumption for the period of time since the previous measurement was taken2. Subtractive and consumptive measuring components can be associated with any type of service, such as water, gas, or electric, and any type of meter, such as deductive or non-deductive12. References: About Measuring Components, Physical Measuring Components, [Oracle Utilities Customer Cloud Service - Get Started]
質問 # 34
What can cause a bill segment to have multiple bill calculation headers?
- A. multiple Scheduled Read Dates covered by the bill period
- B. proration at Calculation Rules level
- C. multiple Rate Version Calculation Group
- D. proration at Bill Factor level
- E. multiple service agreements being covered by a bill segment
正解：C
解説：
A bill segment is a grouping of charges and adjustments that are related to a specific service agreement or service point. A bill segment can have one or more bill calculation headers, which are the result of applying calculation groups to the bill segment. A bill calculation header can have one or more bill calculation lines, which are the individual charges and adjustments that appear on the bill. A bill segment can have multiple bill calculation headers when there are multiple Rate Version Calculation Groups applied to the bill segment. A Rate Version Calculation Group is a calculation group that contains the rules for calculating the charges based on the rate version assigned to the service agreement. A bill segment can have multiple rate versions if there is a rate change during the bill period, or if there are multiple service agreements with different rate versions covered by the bill segment. Each rate version will generate a separate bill calculation header within the bill segment. The other options are not correct because they do not cause multiple bill calculation headers within a bill segment. Multiple Scheduled Read Dates covered by the bill period will affect the usage quantity and the bill factor, but not the number of bill calculation headers. Proration at Bill Factor level or Calculation Rules level will affect the calculation of the charges and adjustments, but not the number of bill calculation headers.
Multiple service agreements being covered by a bill segment will affect the bill segment level, but not the bill calculation header level. References: Bill Segments, Bill Calculation Headers, Rate Version Calculation Groups
質問 # 35
Which major entities hold the key geographic, demographic, and financial information related to a customer who is financially responsible for a property?
- A. Account, Bill, Premise, Service Agreement, Service Port
- B. Account, Person, Premise, Service Agreement, Service Port
- C. Account, Bill, Customer Class, Premise, Service Agreement
- D. Account, Customer Class, Premise, Service Agreement, Service Port
- E. Account, Customer Class, Person, Premise, Service Agreement
正解：E
解説：
The major entities that hold the key geographic, demographic, and financial information related to a customer who is financially responsible for a property are:
Account: An account represents the financial relationship between a customer and the utility. It contains information such as the account number, account type, account status, billing cycle, payment plan, and balance.
Customer Class: A customer class is a grouping of customers based on common characteristics, such as residential, commercial, or industrial. It determines the default values for various attributes, such as rate schedules, service agreements, and billing options.
Person: A person is an individual who is associated with an account, such as the account holder, a contact, or a guarantor. It contains information such as the name, address, phone number, email, and identification number of the person.
Premise: A premise is a physical location where a utility service is provided. It contains information such as the premise number, premise type, premise status, address, coordinates, and service point.
Service Agreement: A service agreement is a contract between a customer and the utility that defines the terms and conditions of the service, such as the service type, start date, end date, rate schedule, and billing frequency.
These entities are linked together in a hierarchical structure, as shown in the following diagram1:
References:
Oracle Utilities Customer Cloud Service Business User Guide, Chapter 2: Customer Information, Section 2.1: Understanding Customer Information
[Oracle Utilities Customer Cloud Service Administrative User Guide], Chapter 2: Configuring Customer Information, Section 2.1: Configuring Customer Information Entities
質問 # 36
What correctly describesthe possible causes of price proration?
- A. changes in Rate Schedule and Bill Factor only
- B. changes in Rate Version Calculation Group and Bill Factor only
- C. change in Bill Factor only
- D. change in Rate Schedule only
- E. change in Rate Version Calculation Group only
正解：B
解説：
A change in rate schedule does not cause price proration, but rather calculation period proration, which is a different process that splits the bill segment into sub-segments based on the effective dates of the rate versions. A change in bill factor alone does not cause price proration, unless it is associated with a calculation rule that also changes during the bill period.
Change in Rate Schedule only: A change in rate schedule does not cause price proration, but rather calculation period proration, which is a different process that splits the bill segment into sub-segments based on the effective dates of the rate versions.
References:
Effective Dates and Price Proration
Calculation Period Proration
Consumption Period Proration
質問 # 37
The base package usage transaction business object is represented by D2-UsageTransaction.The usage calculation engine or process drives the specifics of the usage to be calculated on this business object.
Based on this, which three configuration areas will have an impact on the usage calculation process? (Choose three.)
- A. VEE rule
- B. Factor Override
- C. TOU map
- D. Usage Rule
正解：A、C、D
解説：
Based on the information provided in the Oracle Utilities Customer Cloud Service documentation, the three configuration areas that impact the usage calculation process in the context of the D2-UsageTransaction business object are as follows:
VEE Rule (Validation, Estimation, and Editing Rule): The VEE rule is crucial in the usage calculation process as it involves the validation, estimation, and editing of meter data before it is used for billing and other purposes. This ensures the accuracy and reliability of the data used in the calculation.
TOU Map (Time of Use Mapping): Time of Use (TOU) mapping is significant in the usage calculation process, especially for customers on TOU rates. It involves mapping the consumption data to different time periods, which are often priced differently. This impacts the overall calculation of the usage cost.
Usage Calculation Rules: These rules define how usage is calculated based on various factors such as consumption data, rate schedules, and other relevant parameters. They are integral to determining the final usage charges.
These configuration areas are integral to the process of calculating usage, ensuring that the calculated data is accurate, corresponds to the appropriate time periods, and aligns with the specific billing rules and rates applicable to the customer.
質問 # 38
Which entity defines the type of collection process to start based on age of debt, amount of debt, and type of customer?
- A. Collection Class
- B. Collection Class Control
- C. Collection Process Template
- D. Debt Class
- E. Customer Class
正解：D
質問 # 39
A device has one or more measuring components that measure consumption, demand, or other values.
Which lists two attributes of a measuring component?
- A. Serial Number and Badge Number
- B. Channel Multiplier and Channel ID
- C. Model and Serial Number
- D. Manufacturer and Model
- E. Channel ID and Badge Number
正解：A
質問 # 40
Which two plug-in spots can call the rating functionality using base package-supplied algorithm types? (Choose two.)
- A. Billable Charge Template
- B. Bill Segment Type - Bill Segment Create
- C. Bill Segment Type - Bill Segment FT Creation
- D. Adjustment Type - Generate
- E. Adjustment Type - Adjustment FT Creation
正解：C、E
質問 # 41
Which three initial measurement data (IMD) exception categories are available when you execute VEE rules?
(Choose three.)
- A. Information
- B. Terminate
- C. Issue
- D. Low
- E. Complete
正解：A、B、C
質問 # 42
Usage transactions can contain date breaks. Which is used to supply date breaks?
- A. the Deferred MonitorCalculation Algorithm
- B. the requesting system or user input
- C. the Usage Subscription BO
- D. the Usage Subscription Type
正解：B
解説：
According to the Oracle Utilities Customer Cloud Service User Guides, date breaks are used to break up a usage period into sub-periods based on the dates on which rate changes took place for the service point1. Date breaks are supplied by the requesting system or user input when they request a usage transaction1. The requesting system or user input can specify the date range for the usage transaction, which is referred to as the calculation period1. The usage calculation engine then segregates the usage into multiple usage periods based on the date breaks1. The other options are not used to supply date breaks. The Deferred Monitor Calculation Algorithm is used to determine whether a usage transaction should be deferred or calculated immediately2. The Usage Subscription Type is used to define the characteristics and rules of a usage subscription, such as the usage calculation group, the meter exchange option, and the usage subscription algorithm3. The Usage Subscription BO is used to store the information about a usage subscription, such as the service point, the usage group, the usage calculation group, and the usage transactions4. References: About Usage Transactions, Deferred Monitor Calculation Algorithm, Usage Subscription Type, Usage Subscription BO, Oracle Utilities Customer Cloud Service - Get Started
質問 # 43
At what stage in the initial measurement data (IMD) import process will the application of meter multipliers be performed?
- A. Prepare for VEE
- B. Critical Validation
- C. VEE
- D. post-VEE
正解：B
質問 # 44
Which three statements are correct for Adjustment Types? (Choose three.)
- A. They control the valid Adjustment Profiles that adjustment types can belong to.
- B. They control how adjustments appear on bills.
- C. They control the valid Service Agreement Types that adjustments can be linked to.
- D. They control whether a rate is to be called to calculate an adjustment amount.
- E. They can default an Adjustment Amount to adjustments.
正解：B、D、E
解説：
Adjustment Types in the Oracle Utilities Customer Cloud Service play a significant role in managing financial transactions, particularly adjustments. Here's a breakdown of the correct statements:
They can default an Adjustment Amount to adjustments (Option A): Adjustment Types can have predefined adjustment amounts. When an adjustment type is selected, the predefined amount can automatically be set as the adjustment amount.
They control how adjustments appear on bills (Option B): The appearance of adjustments on bills, including how they are described and categorized, is governed by the Adjustment Types. This includes the presentation and grouping of these adjustments in the billing statements.
They control whether a rate is to be called to calculate an adjustment amount (Option C): Adjustment Types can determine whether a specific rate needs to be invoked for the calculation of the adjustment amount. This aspect is crucial when the adjustment amount depends on particular rate calculations.
Options D and E, pertaining to the control over Service Agreement Types and Adjustment Profiles, are not directly controlled by Adjustment Types. Instead, these aspects are managed by different configurations within the Oracle Utilities Customer Cloud Service.
References:
Oracle documentation on Designing And Defining Adjustment Types: Designing And Defining Adjustment Types.
Oracle documentation on Setting Up Adjustment Types: Setting Up Adjustment Types.
Oracle documentation on Adjustment Types: Adjustment Types.
質問 # 45
A usage subscription must exist before usage transactions can be calculated for a specific service point.
Where do you configure the usage recipient?
- A. in the Usage Rule Type
- B. in the Usage Subscription Type
- C. in the Measuring Component Type
- D. in the Service Point Type
- E. in the Device Type
正解：B
解説：
A usage subscription defines the relationship between a service point and a usage recipient, such as a service provider or a billing system1. A usage subscription must exist before usage transactions can be calculated for a specific service point2. The usage recipient is configured in the usage subscription type, which is a template for creating usage subscriptions3. The usage subscription type specifies the default usage recipient, the usage rule type, the usage subscription status, and other attributes for the usage subscriptions of that type3. References:
1: Usage Subscriptions
2: Usage Transactions
3: Usage Subscription Types
質問 # 46
How many devices can be installed at a service point at an instance in time?
- A. one for each measuring component
- B. up to three devices
- C. exactly one device
- D. one for each service type
正解：C
解説：
According to the Oracle Utilities Customer Cloud Service User Guide1, service points are physical locations at which a company supplies service and are used to store information describing the type of service supplied and how it is measured. Devices are installed at service points, and the relationship between individual service points and devices can change over time. However, a service point may only have one device. If multiple devices at a service point are required, a parent and child service point relationship must be defined to create a hierarchy of service points. On each service point, users can specify a parent service point. This feature can be used to link multiple devices to a single market service point ID or to represent different service types or measuring components at a service point. References: Oracle Utilities Customer Cloud Service - Get Started, About Service Points, Oracle Utilities Operational Device Cloud Service - Get Started
質問 # 47
......
2024年最新のリアルな無料Oracle 1z0-996-22試験問題集問題と解答：https://jp.fast2test.com/1z0-996-22-premium-file.html
1z0-996-22練習テストエンジン購入前に試そう70試験問題：https://drive.google.com/open?id=1imNFkwzJZ5kGqLdsB71iMxcjei53WM4M