合格させる1z0-996-22ブレーン問題集で更新されたのは認定サンプル問題
オンライン1z0-996-22テストブレーン問題集とテストエンジン
Oracle 1z0-996-22試験は、Oracle Utilities Customer Cloud Serviceで働く専門家の知識やスキルを検証するための認定試験であり、Oracle Utilities Customer Cloud Serviceの実装と展開に関連するさまざまなトピックをカバーしています。
Oracle 1z0-996-22 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
| トピック 7 |
|
| トピック 8 |
|
質問 # 42
Which three are important Account concepts that must always be followed? (Choose three.)
- A. An Account can only reference one and only one person at one time.
- B. Accounts expire when there are no active contracts.
- C. Every Account has a unique, system-assigned Account ID.
- D. An Account references one or more persons.
- E. Bills are produced for an account and are sent to the account persons.
正解：A、C、E
質問 # 43
Using a base-supplied algorithm type, what is payment distribution priority typically determined by?
- A. Customer Class and Debt Age
- B. Payment Type + Debt Age
- C. Customer Class and Service Agreement Type
- D. Service Agreement Type's Priority and Debt Age
- E. Debt Age
正解：A
質問 # 44
Approval Profiles control which aspects of an Adjustment?
- A. information defaulted on an Adjustment
- B. whether the adjustment should appear on the customer's next bill
- C. control how adjustments are approved
- D. if an adjustment requires approval before it's frozen
- E. whether current and/or payoff balance are affected by the adjustment
正解：E
解説：
Reference:
%20Adjustment%20Approval.pdf
質問 # 45
What contains the details of how a bill was calculated and how it will be printed on a bill?
- A. Bill
- B. Service Agreement
- C. Calculation Rules
- D. Bill Segments
- E. Rate Schedule
正解：D
解説：
Bill segments are the entities that contain the details of how a bill was calculated and how it will be printed on a bill. A bill typically contains one bill segment for every active service agreement linked to its account. A bill segment contains information showing how the segment was calculated and how it should be printed on the customer's bill. The actions taken to create a bill segment are dependent on the service agreement's SA type.
For example, a service agreement that charges for metered service is produced as follows:
The system requests for the amount or usage consumed (or billing determinants) from Oracle Utilities Meter Data Management (e.g., the number of lamps, the number of gallons of water, the peak kW, etc.).
The service agreement's rate is applied to the amount consumed to calculate how much the customer owes for the service. A bill segment and a financial transaction are generated to reflect the results of this calculation. The system has different bill segment creation algorithms for different types of service agreements, such as deposits, adjustments, or flat fees. The bill segment type on the service agreement's SA type determines which algorithm to use. Bill segments are linked to the source information (e.g., service agreement, rate, meter read) and can be modified by changing the source information and regenerating the bill segment. References: Maintaining Bill Segments, Bill - Bill Segments
質問 # 46
What correctly describes the order in which algorithms, if plugged in, are executed when a bill changes from the "Pending" state to the "Complete" state?
- A. Service Agreement Type - Pre-Bill Completion; Customer Class - Pre-Bill Completion; Service Agreement Type - Bill Completion; Customer Class - Bill Completion; Service Agreement Type - Post-Bill Completion; Customer Class - Post-Bill Completion
- B. Customer Class - Pre-Bill Completion; Customer Class - Bill Completion; Service Agreement Type - Pre- Bill Completion; Service Agreement Type - Post-Bill Completion
- C. Customer Class - Pre-Bill Completion; Service Agreement Type - Pre-Bill Completion; Customer Class - Bill Completion; Service Agreement Type - Bill Completion; Customer Class - Post-Bill Completion
- D. Service Agreement Type - Pre-Bill Completion; Service Agreement Type - Bill Completion; Customer Class - Pre-Bill Completion; Customer Class - Bill Completion; Customer Class - Post-Bill Completion
- E. Service Agreement Type - Pre-Bill Completion; Customer Class - Pre-Bill Completion; Service Agreement Type - Bill Completion; Customer Class - Bill Completion; Customer Class - Post-Bill Completion
正解：E
質問 # 47
What Service Order activity types does theapplication include?
- A. Start Service; Stop Service; Install Meter; Remove Meter; Exchange Meter; Move-In/Move-Out Service
- B. Start Service; Stop Service; Cut for Non-Payment; Reconnect Service for Payment; Exchange Meter; Move-In/Move-Out Service
- C. Enable Service; Disable Service; Cut for Non-Payment; Reconnect Service for Payment; Exchange Meter; Back-to-Back Service
- D. Enable Service; Disable Service; Install Meter; Remove Meter; Exchange Meter; Back-to-Back Service
正解：D
解説：
According to the Oracle Utilities Customer Cloud Service User Guides, the application includes the following service order activity types12:
Enable Service: This activity type is used to activate a service point or a device that is currently inactive or disabled.
Disable Service: This activity type is used to deactivate a service point or a device that is currently active or enabled.
Install Meter: This activity type is used to install a new meter at a service point or replace an existing meter with a different one.
Remove Meter: This activity type is used to remove a meter from a service point or replace it with a dummy device.
Exchange Meter: This activity type is used to exchange a meter with another meter of the same type at a service point.
Back-to-Back Service: This activity type is used to perform a series of service order activities in a single transaction, such as moving out a customer and moving in another customer at the same service point.
References: Understanding Service Order Field Activity Types, Understanding Service Order Activity Types, Oracle Utilities Customer Cloud Service - Get Started
質問 # 48
How many Tenders can a Payment Event have?
- A. one Tender for each form of Payment submitted
- B. one Tender per Payment Event
- C. no Tenders for Payment Events, only Payment Segments
- D. one Tender for eachaccount the payment is applied to
- E. no Tenders for Payment Events, only Payments
正解：A
解説：
A Payment Event is a record of a payment transaction that is received from a customer or a third party. A Payment Event can have one or more Tenders, which are the forms of payment that are used to make the payment transaction. For example, a customer can pay a bill using cash and a check, which are two different Tenders. A Tender can have one or more Payment Segments, which are the portions of the payment that are applied to specific accounts, service agreements, or financial transactions. For example, a check can be split into two Payment Segments, one for each account that the customer wants to pay. A Payment is a record of the application of a payment transaction to an account or a service agreement. A Payment can have one or more Payment Lines, which are the individual financial transactions that are created or updated by the payment. For example, a payment can create a credit financial transaction and update an open debit financial transaction.
The other options are not correct because they do not reflect the relationship between Payment Events, Tenders, Payment Segments, and Payments. References: Payment Events, Tenders, Payment Segments,
[Payments]
質問 # 49
A device has one or more measuring components that measure consumption, demand, or other values.
Which lists two attributesof a measuring component?
- A. Serial Number and Badge Number
- B. Manufacturer and Model
- C. Channel Multiplier and Channel ID
- D. Channel ID and Badge Number
- E. Model and Serial Number
正解：C
解説：
measuring component is a single point for which data will be received and stored in the system. A measuring component can be associated to a device, which can have one or more measuring components, or it can be
"virtual" or "stand-alone," meaning that it is not associated to a device. A measuring component can have various attributes that define its characteristics, such as the measuring component type, the device configuration, the VEE groups, and the scalar or interval class. Two of the attributes that are specific to a measuring component are:
Channel Multiplier: A channel multiplier is a value that is used to adjust the measurement data received from the device to the correct units of measure. For example, if the device measures consumption in cubic feet, but the system stores it in cubic meters, the channel multiplier is used to convert the units.
Channel ID: A channel ID is a unique identifier that is assigned to a measuring component by the device or the head end system. It is used to match the measurement data received from the device to the corresponding measuring component in the system.
The other options are not correct attributes of a measuring component, because:
Channel ID and Badge Number: A badge number is an attribute of a device, not a measuring component. It is a unique identifier that is assigned to a device by the manufacturer or the utility. It is used to track the device's history and location.
Serial Number and Badge Number: A serial number is also an attribute of a device, not a measuring component. It is a unique identifier that is assigned to a device by the manufacturer. It is used to identify the device's model and specifications.
Model and Serial Number: A model and a serial number are both attributes of a device, not a measuring component. They are used to identify the device's manufacturer and specifications.
Manufacturer and Model: A manufacturer and a model are also attributes of a device, not a measuring component. They are used to identify the device's brand and type.
References:
About Measuring Components
Measuring Components
質問 # 50
How should you configure the derived values that are relevant for a device?
- A. Configure the derived values on the Measuring Component for the measuring components to be defined on the device.
- B. Configure the derived values on the Measuring Component Type for the measuring components to be defined on the device.
- C. Configure the derived values on the Final Measurement Type for the measuring components to be defined on the device.
- D. Configure the derived values on the Device Type for the derived values to be defined on the device.
正解：C
質問 # 51
Which business object performs critical validations whenever initial measurements are loaded?
- A. D1-IMDSeeder
- B. D1-IMDRetry
- C. D1-GenericIMDMain
- D. D1-IMDPreVEE
- E. D1-IMDPeriod
正解：A
質問 # 52
How should you configure the derived values that are relevant for a device?
- A. Configure the derived values on the Measuring Component for the measuring components to be defined on the device.
- B. Configure the derived values on the DeviceType for the derived values to be defined on the device.
- C. Configure the derived values on the Final Measurement Type for the measuring components to be defined on the device.
- D. Configure the derived values on the Measuring Component Type for the measuring components to be defined on the device.
正解：D
解説：
Derived values are additional values that are calculated from the final measurement value using a derivation formula1. Derived values can be used for billing, reporting, analysis, or other purposes. Derived values are configured on the measuring component type, which defines the properties and behavior of a measuring component2. A measuring component is a part of a device that measures a service quantity, such as a register, a channel, or a sensor3. A device can have one or more measuring components of different types4. By configuring the derived values on the measuring component type, the system can apply the same derivation formula to all measuring components of that type, regardless of the device they belong to. This ensures consistency and accuracy of the derived values across devices. References:
1: About Final Measurements
2: Measuring Component Types
3: Measuring Components
4: Devices
質問 # 53
What determines an Account's Balance?
- A. the sum of all the balances recorded in the "Balance Due" field on each serviceagreement related to the account
- B. the sum of all the Financial Transactions linked directly to the account
- C. the amount recorded in the "Balance Due" field on an account
- D. the logic defined in a plug-in spot on the Installations Option
- E. the sum of all the Financial Transactions linked directly to theservice agreements related to the account
正解：B
解説：
An account's balance is the total amount of money that the account owes or is owed by the utility1. An account's balance is determined by the sum of all the financial transactions linked directly to the account2. Financial transactions are records of monetary events that affect an account, such as charges, payments, adjustments, or refunds3. Financial transactions can be linked to an account directly or indirectly through a service agreement. However, only the financial transactions that are linked directly to the account are used to calculate the account's balance2. Therefore, the correct answer is E. the sum of all the Financial Transactions linked directly to the account. References:
About Accounts
About Account Balances
About Financial Transactions
[Understanding Financial Transaction Linkage]
質問 # 54
Throughout its lifecycle, an asset's disposition changes as it is moved between locations and service statuses.
Which are valid asset dispositions?
- A. InReceipt; Installed; In Stores; Retired
- B. Receiving; Installed; Storage; Retired
- C. Receiving; In Field; Storage; Retired
- D. In Receipt; In Field; In Stores; Retired
正解：A
解説：
In Oracle Utilities Customer Cloud Service, the valid asset dispositions reflect the various stages an asset undergoes throughout its lifecycle. The correct answer, "C. In Receipt; Installed; In Stores; Retired", represents these stages. These dispositions indicate the status and location of assets as they move in and out of service or undergo maintenance or repair. For example, 'In Receipt' may indicate an asset newly received and not yet deployed, 'Installed' represents assets actively in use, 'In Stores' for assets held in storage, and 'Retired' for assets that are no longer in service.
References:
Oracle documentation on About Assets: About Assets.
Oracle documentation on Asset Locations: Asset Locations.
質問 # 55
Which statement supports usage transaction calculation?
- A. Bill determinants are derived from the final measurements of the measuring components or devices installed at the usage subscription's service points during the calculation period.
- B. Bill determinants are derived from the initial measurement data of the measuring componentsdevices installed at the usage subscription's service points during calculation period.
- C. Bill determinants are derived from the initial measurement data of the measuring components installed at the usage subscription's devices during the calculation period.
- D. Bill determinants are derived from the final measurements for only interval measuring components ordevices installed at the usage subscription's service points during the calculation period.
正解：A
解説：
Usage transactions are the results of usage calculations that derive usage quantities (bill determinants) from the measurements of the measuring components or devices installed at the usage subscription's service points1. Usage transactions can be calculated from either initial measurement data (IMD) or final measurement data (FMD), depending on the usage calculation rules defined in the usage calculation group referenced on the usage subscription2. However, the statement that supports usage transaction calculation is the one that refers to the final measurements, as they are the most accurate and complete data available for billing purposes3. Therefore, the correct answer is C. Bill determinants are derived from the final measurements of the measuring components or devices installed at the usage subscription's service points during the calculation period. References:
About Usage Calculation
Understanding Usage Calculation Groups
About Final Measurement Data
質問 # 56
Which three statements are true in relation to a Payment Arrangement Request? (Choose three.)
- A. examines the Account's eligibility for Payment Arrangement
- B. creates the Payment Arrangement Service Agreement
- C. determines if the Payment Arrangement Request requires approval
- D. calculates delinquent amount for Service Agreements eligible for Payment Arrangement
- E. ensures creation of either Pay Plan or Payment Arrangement
正解：A、B、C
質問 # 57
Measuring components are either subtractive or consumptive.
Whichstatement correctly describes these two concepts?
- A. A subtractive measuring component's consumption for a given period of time is the end measurement minus the start measurement. A consumptive measuring component's consumption is simply the measurement itself, and represents the consumption for the period of time since the previous measurement was taken.
- B. Subtractive measuring components are associated with deductive meters, whereas consumptive measuring components are not.
- C. Subtractive measuring components are associated only with water service, whereas consumptive measuring components are for gas and electric services.
- D. Subtractive measuring components are used to measure demand, whereas consumptive measuring components are used to measure how much was consumed since the previous reading.
正解：A
解説：
According to the Oracle Utilities Customer Cloud Service User Guides, a subtractive measuring component is one that records the cumulative usage of a service point or a device over time1. A consumptive measuring component is one that records the usage of a service point or a device for a specific interval of time2. The difference between these two types of measuring components is how the consumption is calculated. For a subtractive measuring component, the consumption for a given period of time is the end measurement minus the start measurement1. For a consumptive measuring component, the consumption is simply the measurement itself, and represents the consumption for the period of time since the previous measurement was taken2. Subtractive and consumptive measuring components can be associated with any type of service, such as water, gas, or electric, and any type of meter, such as deductive or non-deductive12. References: About Measuring Components, Physical Measuring Components, [Oracle Utilities Customer Cloud Service - Get Started]
質問 # 58
As part of the service order processing, the algorithm D1-CNSPINSDV (Connect SP and/or Install Device) determines if a specificactivity needs to be created based on the state of the service point.
Based on the status of the service point, what can this algorithm create?
- A. Service Point
- B. Device Configuration
- C. Device
- D. Smart Meter Command
正解：D
解説：
The algorithm D1-CNSPINSDV (Connect SP and/or Install Device) is used to create a device and/or a device configuration when a service point is connected or disconnected. The algorithm checks the status of the service point and the device configuration type to determine if a device or a device configuration needs to be created.
For example, if the service point is connected and the device configuration type is Install, the algorithm will create a device and a device configuration. If the service point is disconnected and the device configuration type is Remove, the algorithm will create a device configuration only. References: Oracle Utilities Customer Cloud Service Service Order Configuration Guide, Oracle Utilities Customer Cloud Service Service Order User Guide, Oracle Utilities Customer Cloud Service Algorithms Configuration Guide
質問 # 59
......
Oracle 1z0-996-22試験は、Oracle Utilities Customer Cloud Serviceの実装においてキャリアを進めたいプロフェッショナルにとって必要不可欠な認証です。この認定は、候補者がOracle Utilities Customer Cloud Serviceソリューションを展開、構成、管理する能力と知識を検証します。この認定は候補者に競争力を与え、急速に成長しているクラウドベースのユーティリティ業界で新しいキャリアの機会を開くことができます。
リアルOracle 1z0-996-22試験問題集には正解70問題と解答があります：https://jp.fast2test.com/1z0-996-22-premium-file.html
Oracle 1z0-996-22認定のリアル2024年最新の模擬試験：https://drive.google.com/open?id=1imNFkwzJZ5kGqLdsB71iMxcjei53WM4M