[2024年最新] 高合格率な最新無料156-835試験問題集アンサーを使おう
156-835知能問題集PDF！CheckPoint 156-835試験問セット
Check Point Certified Maestro Expertになるためには、156-835認定試験に合格する必要があります。この試験は、90分以内に90問の複数選択問題に回答する必要があります。合格するには、候補者は少なくとも70%の得点を獲得する必要があります。この試験は、IT認定試験を提供するリーディングプロバイダーであるPearson VUEによって運営されています。
質問 # 21
How many power supplies are presented on MHO-140?
- A. 1 with option for 2
- B. 0
- C. 1
- D. 2
正解：B
質問 # 22
What cannot be learned from the output of lldpctl?
- A. Distribution mode
- B. Orchestrator's IP
- C. Serial number of Appliance
- D. Appliance model
正解：A
質問 # 23
What is the throughput penalty of Security Group?
- A. Depends on the type of Appliance
- B. 1% per member
- C. 10% per Security Group with no relation to amount of members
- D. 5% per member
正解：B
質問 # 24
What will happen in case of NAT of the traffic passing through Management network?
- A. This traffic will not pass correction, since it will be dropped
- B. Since Management traffic is always going to SMO, it will take a care for Correction Layer and will re-distribute traffic to other Appliances
- C. This traffic will pass with no inspection
- D. Orchestrator will disable NAT and traffic will pass with no issue
正解：A
質問 # 25
One single Appliance supports 1M concurrent connections. How many concurrent connections will support Security Group of 2 Appliances?
- A. 1M
- B. 2M
- C. 4M
- D. 500K
正解：B
解説：
One single Appliance supports 1M concurrent connections, so a Security Group of 2 Appliances will support 2M concurrent connections.
https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk91380 How to troubleshoot Gaia Portal (WebUI)
https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk91380
https://downloads.checkpoint.com/dc/download.htm?ID=103853
VSX R81 Administration Guide
https://downloads.checkpoint.com/dc/download.htm?ID=103853
https://sc1.checkpoint.com/documents/Jumbo_HFA/R81.10/R81.10/R81.10-List-of-all-Resolved-Issues.htm List of All Resolved Issues and New Features
https://sc1.checkpoint.com/documents/Jumbo_HFA/R81.10/R81.10/R81.10-List-of-all-Resolved-Issues.htm
質問 # 26
For a VSX configuration - Which statement is wrong?
- A. All Virtual Systems exist on all Appliances
- B. All Virtual Systems exist on the SMO
- C. VSX configuration is the same on all Appliances within the same Security Group
- D. Each Appliance owns different Virtual Systems
正解：B
質問 # 27
What cannot be a reason for "Failed to get remote orchestrator interfaces" error message, when clicking on "Orchestrator" in WebUI?
- A. No Sync between orchestrators
- B. One orchestrator only, but Orchestrator amount is 2 or no Sync in between orchestrators
- C. Single orchestrator environment, but configured Orchestrator amount is 2
- D. Remote orchestrator has no empty interfaces
正解：D
質問 # 28
What kind of cluster Dual-Site can be compared to?
- A. Active-Standby only
- B. VSLS only
- C. Active-Standby or VSLS
- D. Active-Active
正解：D
質問 # 29
What is the minimal requirement for a Security Group?
- A. 1 Appliance and 1 management port
- B. 1 Appliance and 1 administrator with Multi-Domain admin permissions
- C. None, it may be empty.
- D. 2 Appliances and 2 ports
正解：A
質問 # 30
What is the purpose of Management ports located on the Rear Panel of the Orchestrator MHO-140?
- A. Out-of-band interfaces for access to Orchestrator itself.
- B. Reserved for internal purposes. Not in use.
- C. 1Gbps connectivity for Security Groups.
- D. Additional ports used as uplinks.
正解：A
質問 # 31
What is the default IP range of Sync network (with no increment)?
- A. 192.0.2.0
- B. The same as Management network
- C. 192.168.1.0
- D. 198.51.100.0
正解：A
質問 # 32
What type of cluster can a Security Group can be compared to?
- A. Active / Standby
- B. Active / Backup
- C. VSLS
- D. Load Sharing Active /Active
正解：D
質問 # 33
There is a Security group of 10 Appliances and all of them are up and running. How many Appliances within a Security Group keep the same connection in its connection table in case of NAT?
- A. 0
- B. All 10
- C. 1
- D. Between 2 and 4
正解：D
質問 # 34
There are two 10Gbps dual-port NIC installed on a 6800 appliance. Which interfaces should be connected to Orchestrator 1 for downlinks' intra-orchestrator redundancy when using two Orchestrators?
- A. Port 1 in Slot 1 and Port 1 in Slot 2
- B. Port 1 in Slot 1 and Port 2 in Slot 1
- C. Any pair of available ports
- D. Port 1 in Slot 2 and Port 2 in Slot 1
正解：B
質問 # 35
Which command will be used in order to restart Orchestrator service only?
- A. cpstop; cpstart
- B. reboot
- C. service orchestrator restart
- D. orchd restart
正解：C
質問 # 36
What cannot be learned from the output of asg perf -v -p command?
- A. Real-time throughput
- B. Average CPU usage on Appliances
- C. Per-path distribution
- D. Average CPU usage on Orchestrators
正解：D
質問 # 37
What cannot be learned from the output of asg monitor command?
- A. Security Policy status
- B. Port status
- C. Appliances cluster status
- D. Uptime
正解：B
質問 # 38
What cannot be a reason for DETACHED status of Appliance when running asg monitor command?
- A. There's an issue with Downlink cable
- B. Appliance reboots
- C. Appliance is a member of Security Group, but currently disconnected
- D. Appliance installed with R80.20
正解：D
質問 # 39
Which command will be used in order to restart Orchestrator service only?
- A. cpstop; cpstart
- B. reboot
- C. service orchestrator restart
- D. orchd restart
正解：D
解説：
Page 313 from the training manual:
- Restart the service:
orchd restart
- Restart the service without confirmation
service orchd restart
質問 # 40
In case of Correction, where is information about Owner stored?
- A. In Correction table of Target Appliance
- B. In Correction tables of all Appliances participating in Correction Layer flow
- C. In Connection table of Target Appliances
- D. In Connection tables of all Appliances participating in Correction Layer flow
正解：D
質問 # 41
What kinds of transceivers are supported on Orchestrator MHO-170?
- A. SFP+, SFP28. QSFP
- B. SFP. QSFP, QSFP28
- C. SFP. SFP+. SFP28
- D. QSFP. QSFP28
正解：D
質問 # 42
What is the purpose of g_tcpdump command?
- A. Collects traffic dump from Sync network
- B. Collects traffic dump from all Active Appliances within Security Group
- C. Collects traffic dump from CIN network
- D. The same as tcpdump, just on Scalable Platform
正解：B
質問 # 43
......
Check Point Certified Maestro Expert認定資格を取得することで、ITプロフェッショナルには様々なキャリアの機会が提供されます。この認定を持つことで、複雑なセキュリティネットワークを管理する専門知識をアピールし、ポテンシャルエンプロイヤーに自己アピールすることができます。また、Check Point Certified Maestro Expert認定資格は、世界的に認められているため、世界中で認定プロフェッショナルとして活躍することができます。全体的に、この認定はネットワークセキュリティと管理のキャリアを進めたいと考えるITプロフェッショナルにとって、大変価値のある投資です。
CheckPoint 156-835問題集PDFを使ってベストオプションを目指そう：https://jp.fast2test.com/156-835-premium-file.html
2024年最新の156-835サンプル問題は頼もしい156-835テストエンジン：https://drive.google.com/open?id=17mGOpwGN5gHa41eZM2Q1_V84vVKxOJAS