[2023年更新]早速ゲットしてトップランクのCheckPoint 156-835試験問題集 [Q14-Q35]

Share

[2023年更新]早速ゲットしてトップランクのCheckPoint 156-835試験問題集

パスする秘訣は156-835をゲットして認証された試験エンジンPDF


Check Point Certified Maestro Expert認定資格を取得することで、ITプロフェッショナルには様々なキャリアの機会が提供されます。この認定を持つことで、複雑なセキュリティネットワークを管理する専門知識をアピールし、ポテンシャルエンプロイヤーに自己アピールすることができます。また、Check Point Certified Maestro Expert認定資格は、世界的に認められているため、世界中で認定プロフェッショナルとして活躍することができます。全体的に、この認定はネットワークセキュリティと管理のキャリアを進めたいと考えるITプロフェッショナルにとって、大変価値のある投資です。


この試験は、組織がセキュリティ管理システムを拡張できるネットワーク管理ソリューションであるCheck Point Maestroを設計、展開、管理、トラブルシューティングする能力を測定します。また、ネットワーク仮想化、自動化、オーケストレーション、さらに脅威防止、クラウドセキュリティ、モバイルセキュリティなどの高度なセキュリティコンセプトにも触れます。

 

質問 # 14
Complete the sentence: When using a Break-out cable...

  • A. All tails of the break-out cable must represent uplinks
  • B. Each tail of the break-out cable represent an independent port
  • C. All tails of the break-out cable must represent downlinks
  • D. All tails of the break-out cable must represent the same type of ports

正解:B


質問 # 15
There is a Security group of 10 Appliances and all of them are up and running. How many Appliances within a Security Group keep the same connection in its connection table in case of NAT?

  • A. All 10
  • B. 0
  • C. Between 2 and 4
  • D. 1

正解:C


質問 # 16
What cannot be learned from the output of lldpctl?

  • A. Appliance model
  • B. Orchestrator's IP
  • C. Distribution mode
  • D. Serial number of Appliance

正解:C


質問 # 17
Splitter cannot be used __________.

  • A. To connect single port on orchestrator to the same Appliance
  • B. To connect single port on orchestrator to multiple Appliances
  • C. To connect single port on Appliance to multiple ports on the orchestrator
  • D. To connect single port on orchestrator to multiple port on external switch

正解:C


質問 # 18
On MHO-170 - In default configuration, what are GAIA names of Security Group Management ports?

  • A. eth1-Mgmt1 and eth1-Mgmt2
  • B. eth1-Mgmt1 and eth1-Mgmt3
  • C. eth1-Mgmt3 and eth1-Mgmt4
  • D. eth1-Mgmt1 and eth2-Mgmt1

正解:B


質問 # 19
What is the maximum amount of Appliances within the same Security Group?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

正解:C


質問 # 20
For a VSX configuration - Which statement is wrong?

  • A. All Virtual Systems exist on the SMO
  • B. Each Appliance owns different Virtual Systems
  • C. VSX configuration is the same on all Appliances within the same Security Group
  • D. All Virtual Systems exist on all Appliances

正解:A


質問 # 21
There's a 23800 appliance with quad NIC in slot 5. What would be the name of port 3 on this NIC?

  • A. ethsBP-05
  • B. ethsBP3-05
  • C. ethsBP5-03
  • D. ethBP3-05

正解:C


質問 # 22
What cannot be learned from the output of asg monitor command?

  • A. Port status
  • B. Appliances cluster status
  • C. Security Policy status
  • D. Uptime

正解:A


質問 # 23
What is the default Distribution mode?

  • A. Network
  • B. User
  • C. Auto-topology
  • D. Manual-General

正解:D


質問 # 24
What is a downlink interface used for?

  • A. To connect in between Orchestrators
  • B. To connect appliances to customer's infrastructure
  • C. To connect appliances to Orchestrators
  • D. To connect Orchestrators to customer's infrastructure

正解:C


質問 # 25
Orchestrator should be defined in SmartConsole as:

  • A. Host
  • B. Security Gateway
  • C. Orchestrator is not defined in SmartConsole
  • D. Check Point host

正解:C


質問 # 26
What is the Iterator process?

  • A. Iterator is the process that simulates distribution in case of Appliance failure
  • B. Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance recovery
  • C. Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance failure
  • D. Iterator is the process that follow Appliance recovery and simulates what was a distribution if recovered Appliance was alive

正解:C


質問 # 27
What is the minimal amount of cables needed in order to connect an Appliance to an Orchestrator?

  • A. Three cables: uplink, downlink, SYNC
  • B. Four cables: uplink, downlink, SYNC and Management
  • C. Two cables: one uplink and one downlink
  • D. One Downlink cable only

正解:D


質問 # 28
Which command will be used in order to restart Orchestrator service only?

  • A. cpstop; cpstart
  • B. reboot
  • C. orchd restart
  • D. service orchestrator restart

正解:C

解説:
Page 313 from the training manual:
- Restart the service:
orchd restart
- Restart the service without confirmation
service orchd restart


質問 # 29
What cannot be a reason for DETACHED status of Appliance when running asg monitor command?

  • A. There's an issue with Downlink cable
  • B. Appliance reboots
  • C. Appliance is a member of Security Group, but currently disconnected
  • D. Appliance installed with R80.20

正解:D


質問 # 30
What is the purpose of g_tcpdump command?

  • A. The same as tcpdump, just on Scalable Platform
  • B. Collects traffic dump from CIN network
  • C. Collects traffic dump from Sync network
  • D. Collects traffic dump from all Active Appliances within Security Group

正解:D


質問 # 31
What does the lldpctl command do?

  • A. Show all devices discovered by LLDP protocol on uplink ports
  • B. Show all devices discovered by LLDP protocol on downlink ports
  • C. Discover orchestrators
  • D. Show all devices discovered by LLDP protocol on all ports

正解:D


質問 # 32
Which is a valid requirement for a supported Maestro appliance?

  • A. At least one 10GBps line card
  • B. 10GBps and 40Gbps or 100Gbps card with double-VLAN and LLDP support
  • C. Line card with double-VLAN and LLDP support
  • D. Nothing special as Maestro supports any Check Point appliance

正解:B


質問 # 33
When running ifconfig command on an Appliance, there are interfaces shown in the list: ethl-Sync and eth2-Sync. What is the purpose of these interfaces?

  • A. These interfaces are bond members (slaves) of Sync Bond
  • B. These interfaces are not in use. Security GW module use Sync interface for synchronization
  • C. These interfaces represent physical Sync interface at the front panel of appliance
  • D. These interfaces can be used as backup for Sync interface

正解:C


質問 # 34
For a VSX configuration - Which statement is wrong?

  • A. Each Appliance owns different Virtual Systems
  • B. VSX configuration is the same on all Appliances within the same Security Group
  • C. All Virtual Systems exist on all Appliances
  • D. All Virtual Systems exist on the SMO

正解:C


質問 # 35
......

156-835試験問題は練習は2023年最新の66問題:https://jp.fast2test.com/156-835-premium-file.html

156-835試験問題集パスと最新テスト問題集:https://drive.google.com/open?id=17mGOpwGN5gHa41eZM2Q1_V84vVKxOJAS


弊社を連絡する

我々は12時間以内ですべてのお問い合わせを答えます。

我々の働いている時間: ( GMT 0:00-15:00 )
月曜日から土曜日まで

サポート: 現在連絡 

English Deutsch 繁体中文 한국어