[2023年11月] 最新のCheckPoint 156-835テスト問題集とオンライン試験エンジン [Q30-Q49]

Share

[2023年11月] 最新のCheckPoint 156-835テスト問題集とオンライン試験エンジン

CheckPoint 156-835問題を提供していますCCME問題集と完璧な解答付き

質問 # 30
One single Appliance supports 1M concurrent connections. How many concurrent connections will support Security Group of 2 Appliances?

  • A. 500K
  • B. 4M
  • C. 2M
  • D. 1M

正解:C

解説:
One single Appliance supports 1M concurrent connections, so a Security Group of 2 Appliances will support 2M concurrent connections.
https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk91380 How to troubleshoot Gaia Portal (WebUI)
https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk91380
https://downloads.checkpoint.com/dc/download.htm?ID=103853
VSX R81 Administration Guide
https://downloads.checkpoint.com/dc/download.htm?ID=103853
https://sc1.checkpoint.com/documents/Jumbo_HFA/R81.10/R81.10/R81.10-List-of-all-Resolved-Issues.htm List of All Resolved Issues and New Features
https://sc1.checkpoint.com/documents/Jumbo_HFA/R81.10/R81.10/R81.10-List-of-all-Resolved-Issues.htm


質問 # 31
What command will be used for updating fwkern.conf file on all Appliances within Security Group?

  • A. g_update_kernel
  • B. g_all update_conf_file
  • C. g_update_conf_file
  • D. vi

正解:B


質問 # 32
Which command will be used in order to restart Orchestrator service only?

  • A. orchd restart
  • B. cpstop; cpstart
  • C. reboot
  • D. service orchestrator restart

正解:D


質問 # 33
What is the Iterator process?

  • A. Iterator is the process that simulates distribution in case of Appliance failure
  • B. Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance failure
  • C. Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance recovery
  • D. Iterator is the process that follow Appliance recovery and simulates what was a distribution if recovered Appliance was alive

正解:D

解説:
Iterator is the process that follows Appliance recovery and simulates what was a distribution if recovered Appliance was alive. The Iterator process runs on the Security Management Server and simulates the distribution of the Security Gateways if the recovered Appliance was alive. This helps ensure that the network remains secure and the traffic flow is optimized.


質問 # 34
What is the maximum amount of Appliances within the same Security Group?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

正解:D


質問 # 35
What does the lldpctl command do?

  • A. Discover orchestrators
  • B. Show all devices discovered by LLDP protocol on all ports
  • C. Show all devices discovered by LLDP protocol on uplink ports
  • D. Show all devices discovered by LLDP protocol on downlink ports

正解:B


質問 # 36
What cannot be learned from the output of lldpctl?

  • A. Distribution mode
  • B. Orchestrator's IP
  • C. Serial number of Appliance
  • D. Appliance model

正解:A


質問 # 37
What is the purpose of RJ-45 connectors located at the front panel of the Orchestrator MHO-170?

  • A. Reserved for internal purposes. Not in use
  • B. Out-of-band interface for access to Orchestrator itself and Serial Console connector
  • C. Two Out-of-band interfaces for access to Orchestrator itself
  • D. 1Gbps connectivity for Security Groups

正解:B


質問 # 38
Which file on Appliance includes information about Security Group?

  • A. /etc/chassisdb.json
  • B. /etc/distutiljson
  • C. /etc/smodb.json
  • D. /etc/sgdb.json

正解:D


質問 # 39
What is the minimal requirement for a Security Group?

  • A. 1 Appliance and 1 administrator with Multi-Domain admin permissions
  • B. 1 Appliance and 1 management port
  • C. 2 Appliances and 2 ports
  • D. None, it may be empty.

正解:B


質問 # 40
What command should be used for collecting diagnostic information about the orchestrator?

  • A. asg pert -v
  • B. orch_info
  • C. cpview
  • D. cpinfo

正解:B


質問 # 41
What cannot be a reason for "Failed to get remote orchestrator interfaces" error message, when clicking on "Orchestrator" in WebUI?

  • A. Remote orchestrator has no empty interfaces
  • B. One orchestrator only, but Orchestrator amount is 2 or no Sync in between orchestrators
  • C. Single orchestrator environment, but configured Orchestrator amount is 2
  • D. No Sync between orchestrators

正解:A


質問 # 42
What does the command'g_all' do?

  • A. Bring up all Appliances
  • B. It's followed by other command and execute it on all Appliances connected to Orchestrator
  • C. It's followed by other command and execute it on all active Appliances within Security Group
  • D. Switches all Appliances to Global mode

正解:C


質問 # 43
There are two 10Gbps dual-port NIC installed on a 6800 appliance. Which interfaces should be connected to Orchestrator 1 for downlinks' intra-orchestrator redundancy when using two Orchestrators?

  • A. Port 1 in Slot 2 and Port 2 in Slot 1
  • B. Any pair of available ports
  • C. Port 1 in Slot 1 and Port 2 in Slot 1
  • D. Port 1 in Slot 1 and Port 1 in Slot 2

正解:D


質問 # 44
What cannot be a reason for DETACHED status of Appliance when running asg monitor command?

  • A. Appliance reboots
  • B. Appliance is a member of Security Group, but currently disconnected
  • C. Appliance installed with R80.20
  • D. There's an issue with Downlink cable

正解:C


質問 # 45
What is the purpose of Management ports located on the Rear Panel of the Orchestrator MHO-140?

  • A. Additional ports used as uplinks.
  • B. 1Gbps connectivity for Security Groups.
  • C. Out-of-band interfaces for access to Orchestrator itself.
  • D. Reserved for internal purposes. Not in use.

正解:C


質問 # 46
Where should sx_api_ports_dump,py command be ran?

  • A. Management server
  • B. Orchestrator
  • C. Security Group
  • D. SMO Appliance

正解:B


質問 # 47
What is the default Distribution mode?

  • A. User
  • B. Network
  • C. Manual-General
  • D. Auto-topology

正解:C


質問 # 48
In case of VSX: What is the right command to see overall performance details of all Appliances within the Security Group and all Virtual Systems?

  • A. asg pert -v -p
  • B. asg pert -v
  • C. asg pert -vs all -v -vv
  • D. asg pert -vs enabled -p

正解:C


質問 # 49
......

2023年最新の156-835テスト解説(更新されたのは66問があります):https://jp.fast2test.com/156-835-premium-file.html

信頼され続ける156-835試験のコツがあるPDF試験材料:https://drive.google.com/open?id=17mGOpwGN5gHa41eZM2Q1_V84vVKxOJAS


弊社を連絡する

我々は12時間以内ですべてのお問い合わせを答えます。

我々の働いている時間: ( GMT 0:00-15:00 )
月曜日から土曜日まで

サポート: 現在連絡 

English Deutsch 繁体中文 한국어