2023年11月 HP HPE6-A75実際の問題とブレーン問題集 [Q12-Q35]

2023年11月 HP HPE6-A75実際の問題とブレーン問題集

HPE6-A75合格させる問題集でHP24時間で試験合格できます

HP HPE6-A75（Aruba Certified Edge Professional）試験は、ネットワーク設計と構成に特化したITプロフェッショナル向けの認定試験です。この試験では、Aruba有線および無線ネットワークの設計、実装、および設定に関する候補者の知識とスキルが評価されます。この試験に合格することで、候補者は現代のネットワークの複雑な要求を満たすためにArubaソリューションを展開する専門知識を有することが証明されます。

質問 # 12
An AOS-Switch has type of service disabled on it globally. The administrator enters:
AOS-Switch(config)# interface 1 qos trust device aruba-ap
What is the effect of this command?

A. if interface 1 connects to an Aruba AP, it uses the incoming DSCP and a global DSCP map to prioritize traffic received on this interface
B. if the AOS-Switch is integrated with an Aruba Mobility Controller, it uses QoS settings send by the controller to prioritize traffic sent on interface 1
C. if the AOS-Switch is integrated with an Aruba Mobility Controller, it uses QoS settings sent by the controller to classify traffic received on interface 1
D. if interface connects to an Aruba AP, the switch marks all traffic received on the interface with a higher than default priority value

正解：B

質問 # 13
A company requires AOS-Switches at the campus core. The switches:
Will act as the default gateways for several campus VLANs
Must provide redundancy for their services and tolerate the loss of a link or an entire switch Must recover from the failure of one of the switches within a second or less VRRP and MSTP are proposed to meet these requirements. What is an issue with this proposal?

A. VRRP does not interoperate with MSTP.
B. VRRP provides routing redundancy but not default gateway redundancy.
C. VRRP takes longer than a second to fail over.
D. VRRP provides redundancy against lost links but not a failed switch.

正解：C

質問 # 14
Refer to the exhibit.

An administrator implements AP licensing on a Mobility Master (MM).
* Each campus is responsible to purchase its own AP licenses.
* There are 900 AP licenses deployed in the global pool
* There are three dedicated pools.
* From the global pool, 300 AP licenses are assigned to each dedicated pool.
Network engineers at CampusA want to deploy an additional 100 APs. Currently all of the AP licenses in CampusA and CampusB are allocated, but only 200 of the AP licenses m CampusC are allocated.
What can the administrator do to add capacity for CampusA in alignment with campus policies?

A. Add 100 more AP licenses and assign them to the CampusA pool.
B. Add 100 more AP licenses to the global pool.
C. Move 100 licenses from the CampusC pool to the global pool.
D. Allow CampusA to share from the CampusC pool.

正解：A

質問 # 15
A customer wants to implement Virtual IP redundancy, such that in case of a ClearPass server outage, 802.1x authentications will not be interrupted. The administrator has enabled a single Virtual IP address on two ClearPass servers.
Which statements accurately describe next steps? (Select two.)

A. A new Virtual IP address should be created for each NAD.
B. The NAD should be configured with the Virtual IP address for RADIUS authentications on the 802.1x network.
C. The primary node will respond to authentication requests sent to the Virtual IP address when the primary node is active.
D. The NAD should be configured with the primary node IP address for RADIUS authentication on the 802.1x network.
E. Both the primary and secondary nodes will respond to authentication requests sent to the Virtual IP address when the primary node is active.

正解：B、C

質問 # 16
Refer to the exhibits.

Refer to the exhibits. The network administrator enters the commands shown in Exhibit 2. What is the spanning tree status on Al and A2?

A. Both Al and A2 block traffic.
B. A1 towards traffic, and A2 blocks traffic.
C. A1 blocks traffic, and A2 forwards traffic.
D. Both A1 and A2 forward traffic

正解：D

質問 # 17
An administrator configures the MultiZone feature for a company network, where a mobility cluster is the primary zone and a standalone controller in the company's DMZ represents a secondary data zone. The administrator configures two AP Groups and respective VAPs for the zones on the Mobility Master (MM) in the primary zone. When the APs boot up and establish connections to both zones, the administrator notices that no data connections are established to the data zone.
What must the administrator do to fix this problem?

A. Create different AP groups and VAPs on the Mobility Master and standalone controllers, and associate the MultiZone APs to both groups.
B. Have the MultiZone APs initially boot from the standalone controller in the data zone.
C. Configure the same AP Groups and VAPs on the standalone controller, and associate the MultiZone APs to both groups.
D. Configure the same AP Group in the data zone as it is in the primary zone, and configure the VAPs in the data zone.

正解：A

質問 # 18
An administrator deploys Aruba Mobility Controller 7005s to a company's branch offices. The administrator wants to disable the console port to prevent unauthorized access to the controllers.
Which controller command should the administrator use to implement this policy?

A. console disable
B. no console enable
C. no mgmt-user console
D. mgmt-user console-block

正解：D

質問 # 19
Refer to the exhibit.

Based on the Attribute configuration shown, which statement accurately describes the status of attribute values?

A. Only the attribute value of company can be used in role mapping policies, not the other attributes.
B. Only the attribute values of title, telephoneNumber, and mail can be used in role mapping policies.
C. Only the attribute values of department and memberOf can be used in role mapping policies.
D. The attribute values of department, title, memberOf, telephoneNumber, and mail are directly applied as ClearPass.
E. The attribute values of department and memberOf are directly applied as ClearPass roles.

正解：E

質問 # 20
Refer to the exhibit.

The network administrator needs to set up BGP between the two company switches. Switch-1 and Switch-2. The BGP connection does not establish. Based on the exhibits, what does the administrator need to do to fix the issue?

A. Enable the multihop option for the neighbor on each of the switches.
B. Enable BGP on the interfaces that the switches use to reach each other.
C. Enter the network command for 10.0.0.0/24 in the router BGP mode on each switch.
D. Set the update source for the neighbor to the local loopback interface on each switch.

正解：D

質問 # 21
Which ArubaOS CLl command can an administrator execute to determine if AP load balancing is enabled in a cluster?

A. show switches
B. show lc-cluster group-membership
C. show aaa cluster essid
D. show ap active

正解：B

質問 # 22
Refer to the exhibit.

Based on the configuration of the Enforcement Profiles In the Onboard Authorization service shown, which Onboarding action will occur?

A. After logging in on the Onboard web login page, the device will be disconnected form and reconnected to the network before Onboard begins.
B. The device will be disconnected from the network after Onboarding so that an EAP-TLS authentication is not performed.
C. The device's onboard authorization request will be denied.
D. The device will be disconnected after post-Onboarding EAP-TLS authentication, so a second EAP-TLS authentication is performed.
E. The device will be disconnected from and reconnected to the network after Onboarding is completed.

正解：E

質問 # 23
An administrator configures an ArubaOS-Switch for per -user tunneled node. Which protocols does the switch use to establish and maintain a connection with the Aruba Mobility Controller (MO? (Select two.)

A. SSL
B. GRE
C. IPSec
D. PAPI

正解：B、D

質問 # 24
Refer to the exhibit.

The network administrator wants to reduce failover time If a switch link m VIAN 100 goes down.
What should the administrator do?

A. Configure graceful restart on all of the OSPF routing devices on VLAN 100.
B. Configure echo mode BFD on VLAN 100 on all OSPF routing devices on VLAN 100.
C. Lower the hello timer only on the BDR of VLAN 100.
D. Lower the dead timer on the BDR of VLAN 100.

正解：B

質問 # 25
Refer to the exhibit.

A known unicast packet is received from Switch-1 on the standby and must be forwarded to Switch-2. How does the VSF fabric decide which port in the aggregated (ink should forward the packet?

A. The standby selects the port on the designated forwarder for the aggregation.
B. The standby uses its own port in the link aggregation to forward the fabric.
C. The standby uses the typical load sharing algorithm, and it might select either its port or the commander's port.
D. The standby sends the packet to the commander over a VSF link, and the commander decides the correct port.

正解：B

質問 # 26
Refer to the exhibit.

The network administrator needs to set up BGP between the two company switches. Switch-1 and Switch-2. The BGP connection does not establish. Based on the exhibits, what does the administrator need to do to fix the issue?

A. Enable the multihop option for the neighbor on each of the switches.
B. Enable BGP on the interfaces that the switches use to reach each other.
C. Enter the network command for 10.0.0.0/24 in the router BGP mode on each switch.
D. Set the update source for the neighbor to the local loopback interface on each switch.

正解：D

質問 # 27
An administrator creates service-based policies for AirGroup on the Mobility Master (MM). The administrator can define location-based policy limits based on which information?

A. AP names, AP groups, and AP Fully Qualified Location Names (FQLNs)
B. AP Fully Qualified Location Names (FQLNs) and controller Fully Qualified Domain Names (FQDNs)
C. AP names, AP groups, controller names, and controller groups
D. Controller names, controller groups, and controller Fully Qualified Domain Names (FQDNs)

正解：A

質問 # 28
Refer to the exhibit.

A. mike
B. john
C. Employee
D. We can't know this from the screenshot above.

正解：D

解説：
The role field in the local user repository is not the role derived from role maping.

質問 # 29
An administrator wants to implement bandwidth limits for guest users to restrict their Internet usage. On the Mobility Master (MM), where would the administrator define these limits?

A. 802.1X policy
B. User role
C. Firewall policy
D. AAA policy

正解：C

質問 # 30
Refer to the exhibit.

An Enforcement Profile has been created in the Policy Manager as shown. Which action will ClearPass take based on this Enforcement Profile?

A. ClearPass will count down 600 seconds and send a RADIUS CoA message to the user to end the user's session after this time is up.
B. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Accept packet to the User and the user's session will be terminated after 600 seconds.
C. ClearPass will count down 600 seconds and send a RADIUS CoA message to the NAD to end the user's session after this time is up.
D. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Request packet to the NAD and the NAD will end the user's session after 600 seconds.
E. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Accept packet to the NAD and the NAD will end the user's session after 600 seconds.

正解：E

質問 # 31
Refer to the exhibit.

Traffic between the servers m Area l takes a less optimal path rather than the link associated with VLAN l OOO, subnet 10.0.0.0/30. Based on the exhibits, why is this the case?

A. OSPF routing switches choose the best intra-area routes based on Area 1 links only.
B. Switch-1 and Switch-2 cannot achieve adjacency on VLAN 1000 due to mismatches.
C. The link between Switch-1 and Switch-2 has gone down.
D. The metric on the VLAN 1000 interface is too low.

正解：A

質問 # 32
An administrator deploys an AP at a branch office. The branch office has a private WAN circuit that provides connectivity to a corporate office controller. An Ethernet port on the AP is connected to a network storage device that contains sensitive information. The administrator is concerned about sending this traffic in clear-text across the private WAN circuit.
What can the administrator do to prevent this problem?

A. Enable IPSec encryption on the AP's wired ports.
B. Convert the campus AP into a RAP.
C. Redirect the wired port traffic to an AP-to-controller GRE tunnel.
D. Enable AP encryption for wired ports.

正解：A

質問 # 33
Refer to the exhibit.

An AD user's department attribute is configured as *HR". The user connects on Monday using their Windows Laptop to a switch that belongs to the Device Group HQ. Which role is assigned to the user in ClearPass?