更新された2023年12月テストエンジン練習HPE6-A75問題集と練習試験合格させます
問題集お試しセットHPE6-A75テストエンジンで問題集トレーニングには72問あります
この試験は、ワイヤレスLANの設計、有線および無線の統合、ネットワークセキュリティ、ネットワーク管理、トラブルシューティングなど、幅広いトピックをカバーしています。また、ClearPass、AirWave、Mobility MasterなどのArubaの主要なテクノロジーに関する知識もテストされます。HP HPE6-A75試験に合格することは、受験者がArubaエッジソリューションを効果的に展開し、管理するために必要なスキルと知識を持っていることを示しています。この認定は、ITプロフェッショナルに高く評価され、業界全体で世界的に認められています。
質問 # 10
The administrator expects the AP to connect to a cluster, but the AP tails to connect. The administrator examines the configuration of an AP from apboot mode shown in the exhibit.
What can the administrator determine about the configuration of the AP?
- A. The AP is configured as a RAP to terminate on a stand-alone controller.
- B. The AP is configured to terminate on a Mobility Controller in a cluster.
- C. The AP is configured to terminate on a non-cluster Mobility Controller.
- D. The AP is configured as a RAP to terminate on a Mobility Master.
正解：C
解説：
The AP is configured to terminate on a non-cluster Mobility Controller.
The AP connects to cfg_lms=10.1.10.101.
質問 # 11
A customer wants to implement Virtual IP redundancy, such that in case of a ClearPass server outage, 802.1x authentications will not be interrupted. The administrator has enabled a single Virtual IP address on two ClearPass servers.
Which statements accurately describe next steps? (Select two.)
- A. Both the primary and secondary nodes will respond to authentication requests sent to the Virtual IP address when the primary node is active.
- B. The NAD should be configured with the primary node IP address for RADIUS authentication on the 802.1x network.
- C. The primary node will respond to authentication requests sent to the Virtual IP address when the primary node is active.
- D. The NAD should be configured with the Virtual IP address for RADIUS authentications on the 802.1x network.
- E. A new Virtual IP address should be created for each NAD.
正解：C、D
質問 # 12
An administrator wants to use Airwave to manually add devices on the network. Where should the administrator perform this action?
- A. in Devices
- B. in Device Setup
- C. in Groups
- D. in AMP Setup
正解：B
質問 # 13
Refer to the exhibit.
An AD user's department attribute is configured as *HR". The user connects on Monday using their Windows Laptop to a switch that belongs to the Device Group HQ.
Which role is assigned to the user in ClearPass?
- A. HR Local
- B. Remote Employee
- C. Executive
- D. Vendor
- E. iOS Device
正解：A、B
質問 # 14
Refer to the exhibit.
When configuring a Web Login Page in ClearPass Guest, the information shown is displayed. What is the Address field value 'securelogin.arubanetworks.com' used for?
- A. for ClearPass to send a TACACS+ request to the NAD
- B. for ClearPass to send a RADIUS request to the NAD
- C. for appending to the Web Login URL, after the page name.
- D. for appending to the Web Login URL, before the page name
- E. for the client to POST the user credentials to the NAD
正解：E
質問 # 15
Refer to the exhibit.
An AD user's department attribute is configured as *HR". The user connects on Monday using their Windows Laptop to a switch that belongs to the Device Group HQ. Which role is assigned to the user in ClearPass?
- A. HR Local
- B. Remote Employee
- C. Executive
- D. Vendor
- E. iOS Device
正解：A、B
質問 # 16
An administrator wants to implement bandwidth limits for guest users to restrict their Internet usage. On the Mobility Master (MM), where would the administrator define these limits?
- A. 802.1X policy
- B. User role
- C. Firewall policy
- D. AAA policy
正解：C
質問 # 17
An AOS-Switch needs to implement tunneled node in role-based mode. Aruba ClearPass is configured to assign users for which the traffic should be tunneled to a role named tunnel. The Aruba Mobility Controller should apply policies associated with the employees group to these users.
What is the correct user role configuration on the AOS-Switch for this scenario?
- A. one user role named tunnel with employees set as the secondary role in the tunneled-node- command redirect
- B. two user roles, one named tunnel that uses the tunneled-node-redirect command, and one named employees
- C. two user roles, one named employees that uses the tunneled-node-redirect command, and one named tunnel
- D. one user role named employees with tunnel set as the secondary role in the tunneled-node- command redirect
正解：D
質問 # 18
An administrator implements a standalone controller that runs ArubaOS 8.x. Which feature should the administrator configure to optimize the RF operation for the company's WLAN?
- A. ARM
- B. Clustering
- C. AirMatch
- D. Zones
正解：C
質問 # 19
Refer to the exhibit.
Switch-1 and Switch-2 connect on interface A23. The switches experience a connectivity issue. The network administrator sees that both switches show this interface as up. The administrator sees the output shown in the exhibit on Switch-1.
What is a typical issue that could cause this output?
- A. asymmetric routing introduced by a routing configuration error
- B. a hardware issue, such as a broken cable
- C. mismatched IP addresses on the VLAN for the link
- D. an issue with queuing, caused by mismatched QoS settings
正解：B
質問 # 20
Refer to the exhibit.
An employee connects a corporate laptop to the network and authenticates for the first time using EAP-TLS. Based on the Enforcement Policy configuration shown, which Enforcement Profile wilt be sent?
- A. Onboard Pre-Provisioning - Aruba
- B. Onboard Post-Provisioning - Aruba
- C. Onboard Device Repository
- D. Deny Access Profile
正解：A
質問 # 21
An administrator configures the MultiZone feature for a company network, where a mobility cluster is the primary zone and a standalone controller in the company's DMZ represents a secondary data zone. The administrator configures two AP Groups and respective VAPs for the zones on the Mobility Master (MM) in the primary zone. When the APs boot up and establish connections to both zones, the administrator notices that no data connections are established to the data zone.
What must the administrator do to fix this problem?
- A. Create different AP groups and VAPs on the Mobility Master and standalone controllers, and associate the MultiZone APs to both groups.
- B. Configure the same AP Group in the data zone as it is in the primary zone, and configure the VAPs in the data zone.
- C. Configure the same AP Groups and VAPs on the standalone controller, and associate the MultiZone APs to both groups.
- D. Have the MultiZone APs initially boot from the standalone controller in the data zone.
正解：A
質問 # 22
Which technologies can prevent split brain in a VSF fabric that includes Aruba 2930F switches?
- A. LLDP MAD or VLAN MAD
- B. ARP MAD or OOBM MAD
- C. VLAN MAD or ARP MAD
- D. OOBM MAD or LLDP MAD
正解：A
質問 # 23
Refer to the exhibit.
An employee connects a corporate laptop to the network and authenticates for the first time using EAP-TLS. Based on the Enforcement Policy configuration shown, which Enforcement Profile wilt be sent?
- A. Onboard Pre-Provisioning - Aruba
- B. Onboard Post-Provisioning - Aruba
- C. Onboard Device Repository
- D. Deny Access Profile
正解：A
質問 # 24
A company requires AOS-Switches at the campus core. The switches:
Will act as the default gateways for several campus VLANs
Must provide redundancy for their services and tolerate the loss of a link or an entire switch Must recover from the failure of one of the switches within a second or less VRRP and MSTP are proposed to meet these requirements. What is an issue with this proposal?
- A. VRRP takes longer than a second to fail over.
- B. VRRP does not interoperate with MSTP.
- C. VRRP provides redundancy against lost links but not a failed switch.
- D. VRRP provides routing redundancy but not default gateway redundancy.
正解：A
質問 # 25
An administrator configures an ArubaOS-Switch for per -user tunneled node. Which protocols does the switch use to establish and maintain a connection with the Aruba Mobility Controller (MO? (Select two.)
- A. IPSec
- B. SSL
- C. GRE
- D. PAPI
正解：C、D
質問 # 26
Refer to the exhibit.
A company has attempted to implement OSPF without success. The devices in Area I need to be able to reach Area 2. Routes should be aggregated for advertisement in other areas. What must be changed to meet these requirements?
- A. Change Area 3 to Area 0; remove Area 1 from Switch-2 and Area 2 from Switch-1.
- B. Add Area 1 and Area 2 on VIAN 100 on both Switch-1 and Switch-2. Remove Area 3.
- C. Add the 10.2.0.0/16 range on Swttch-1 and the 10.1.0.0/16 range on Switch-2.
- D. Move the 10.1.0.0/16 range to Area 2 on Switch-1 and the 10.2.0.0/16rangetoArea 1 onSwitch-2.
正解：A
質問 # 27
An administrator supports a cluster of four Aruba Mobility Controllers (MCs) with management addresses of 10.1.100.101, 10.1.100.102, 10.1.100.103, and 10.1.202.181. The administrator accesses an AP associated with this cluster, reboots it and accesses apboot mode. The administrator executes the printenv command. Which AP parameter contains the IP addresses of the cluster members that the AP should use to connect to the cluster?
- A. Master_ip
- B. Cfg_lms
- C. Noodelist
- D. Servername
正解：C
質問 # 28
Which protocol do Mobility Controllers (MCs) use to detect a failed Mobility Master (MM)?
- A. IPSec
- B. SNMP
- C. VRRP
- D. PAPI
正解：B
質問 # 29
Refer to the exhibit.
The network administrator needs to set up BGP between the two company switches. Switch-1 and Switch-2. The BGP connection does not establish. Based on the exhibits, what does the administrator need to do to fix the issue?
- A. Enable the multihop option for the neighbor on each of the switches.
- B. Set the update source for the neighbor to the local loopback interface on each switch.
- C. Enable BGP on the interfaces that the switches use to reach each other.
- D. Enter the network command for 10.0.0.0/24 in the router BGP mode on each switch.
正解：B
質問 # 30
Refer to the exhibit.
Based on the Attribute configuration shown, which statement accurately describes the status of attribute values?
- A. The attribute values of department, title, memberOf, telephoneNumber, and mail are directly applied as ClearPass.
- B. Only the attribute value of company can be used in role mapping policies, not the other attributes.
- C. Only the attribute values of title, telephoneNumber, and mail can be used in role mapping policies.
- D. Only the attribute values of department and memberOf can be used in role mapping policies.
- E. The attribute values of department and memberOf are directly applied as ClearPass roles.
正解：E
質問 # 31
......
HP HPE6-A75問題集カバー率リアル試験問題：https://jp.fast2test.com/HPE6-A75-premium-file.html