2023年最新ののNutanix NCSE-Coreリアル試験問題集PDF
NCSE-Core試験問題集、NCSE-Core練習テスト問題
質問 # 106
A prospective customer wants to migrate database workloads to Nutanix. They are currently running these workloads on a 3-tier vSphere architecture made up of 5 hosts connected to a hybrid SAN over 10G iSCSI. The hosts each have 256G RAM and 2 Broadwell 2.8Ghz 12 core processors. The largest database VM is configured with 64G of memory. Some databases are fairly old and single threaded Current performance is deemed acceptable. Which configuration component is most important to maintain the customer experience on a new Nutanix cluster and minimize costs ?
- A. Make sure the cluster is all flash to speed up data access.
- B. Make sure the cluster uses similar speed processors regardless of generation
- C. Make sure the cluster uses 512G per host to protect NUMA boundaries.
- D. Make sure the cluster uses 25G nics to speed up the network
正解：C
質問 # 107
A customer intends to build out their VDI environment over a period of 18 months. They require a consistent user experience as the numbers grow.
What element of the Nutanix WebScale architecture would a systems engineer discuss with them?
- A. No single point of failure
- B. Nutan can run on multiple hardware vendor platforms
- C. All intelligence in software
- D. Linear performance with predictable scaling
正解：D
質問 # 108
A prospective customer is evaluating solutions to support a project. The systems engineer proposes a hybrid model as recommended by Sizer. The prospect is concerned about the performance of a hybrid configuration and is evaluating an all flash array. Which two Nutanix features should be discussed to address the concerns of the prospective customer? (Choose two)
- A. Acropolis Dynamic Scheduler
- B. AHV Turbo Mode
- C. Automatic Data Tiering
- D. Data Locality
正解：B、C
質問 # 109
An SE needs to size a new project that requires offsite backup but not remote disaster recovery. The prospect requires an RTO of 48 hours, RPO of 4 hours, and the ability to restore from the past 5days of backups. The prospect's data change rate is 1%.
How should the SE configure Sizer for this scenario?
- A. Option B
- B. Option C
- C. Option A
- D. Option D
正解：D
質問 # 110
A customer is conceded that IT will not be able to take advantage of Nutanix's frequent feature releases due to the man hour requirements of maintaining compliance with industry regulatory controls.
Which item should the SE discuss at the next customer visit with IT?
- A. Factory-installed self-encryption drives (SED)
- B. Security Configuration Management Automation (SCMA)
- C. Two-factor Authentication
- D. Data at Rest Encryption (Software)
正解：B
質問 # 111
An online retailer currently support over 200 separate PostgreSQL database instances, often with more than 10 copies of each individual database. Their Database Administrators have scripted much of the deployment process for creating dev/test copies, but their infrastructure team struggles to keep up with storage capacity demands. Which Nutanix product should the systems engineer position ?
- A. Karbon
- B. Calm
- C. Beam
- D. Era
正解：D
質問 # 112
A systems engineer provides a demo to a prospective customer who wants to be more hands on with Nutanix Which two resources can the customer leverage without support from a systems engineer or Nutanix? (Choose two)
- A. Test Drive
- B. Hosted POC (HPOC)
- C. Community Edition (CE)
- D. Foundation
正解：A、C
質問 # 113
A systems engineer is creating a configuration in Sizerfor a customer that is building an app for use as an ebooks repository.
The app requires the following twho workloads.
1. 50 generic web server VMs, each with 2 vCPUs on a 4:1 vCPU:CPU ratio, 8GB of RAM, and 100GB of storage each
2. A fileserver workload with 80TB of usable storage available, which contains mostly PDFs and pre- compressed data Any reduction in performance of the web servers must be avoided. After entering the workloads with default options, The Sizer oupouts the configuration shown in the exhibit.
Which adjustment does the systems engineer need to make to the scenario to meet the performance requirements?
- A. Switch to manual and change the CPUs of the node configuratin to dual 10 core model.
- B. Increse the vCPU:CPU ratio of the Webserver workload to 6:1
- C. Switch to manual sizing and increase the RAM of the node configuration to 384GB.
- D. Increse the RAM of the webserver workload to 10GB per VM.
正解：C
質問 # 114
Refer to the exhibit.
Assuming a prospect is currently using Thick Provisioned virtual disk, at a minimum, which two tabs should be evaluated in an RVTools report to determine required resources for sizing? (Choose two.)
- A. vNetwork
- B. vPartition
- C. vCluster
- D. vDisk
- E. vInfo
正解：B、E
質問 # 115
Where are Leap Availability Zones configured?
- A. Cloud Connect
- B. Controller VM
- C. Prism Element
- D. Prism Central
正解：D
解説：
Terminology
Availability Zone - it is represented by all resources (Nutanix Clusters) connected to Prism Central or Xi Leap Availability zone. Depends on the architecture, Availability zone can represent geographic territory, datacenter or server room in the datacenter. Protection policies - in protection policies you set up (RPO, Retention), rules to auto-apply policies to virtual machines
https://vmwaremine.com/2019/02/08/nutanix-leap-runbooks-part-1/#sthash.VwrzSzhQ.dpbs
質問 # 116
A systems engineer (SE) is gathering requirements to size a hybrid cluster to replace a prospect's existing IT test and development environment The prospective customer has indicated the cluster contains no business critical applications and has provided the aggregate vCPU and RAM requirements of the existing cluster.
Which two additional items does the SE require to size the cluster' (Choose two.)
- A. Existing Drive Count
- B. Storage Capacity
- C. Working Data Set
- D. Virtual Switch Configuration
正解：B、C
質問 # 117
Refer to the exhibit.
Using the Sizing Options shown, which two configurations are valid when using Sizer in Automatic mode?(Choose two.)
- A. 6x NX-165S-G5 (3x 48GB SSD per node)
- B. 3x NX-3060-G5 (2x 1920GB SSD per node) + 3x NX-3055G (4x960GBSSD per node)
- C. 6x NX-8150-G5 (4x 1920GB SSD + 20x 2TB HDD per node)
- D. 4x NX-1065-G5 (3x 3840GB SSDs per node) + 4x NX-6035CG5(6x3840GB SSD per node)
- E. 6x NX-3060-G6 (6x 1920GB SSDs per node)
正解：B、E
質問 # 118
An existing customer wants to upgrade their non-AHV hypervisor to the most recent version. The customer needs confirm that the hypervisor is supported on their AOS version. Where on the Support Portal is this information located?
- A. Upgrade Paths
- B. Field Advisories
- C. Compatibility Matrix
- D. EOL, Information
正解：A
質問 # 119
Refer to Exhibit.
An administrator increases the cluster RF to 3. The containers are not modified.
What will the new values in the data resiliency dashboard be for FAILURES TOLERABLE for the Zookeeper and Extent Groups components?
- A. Zookeeper = 2 and Extent Groups = 2
- B. Zookeeper = 2 and Extent Groups = 1
- C. Zookeeper = 1 and Extent Groups = 2
- D. Zookeeper = 1 and Extent Groups = 1
正解：C
質問 # 120
An SE is building a solution for a federal goverment prospect that u???
Which two items are required to deliver a solution that meens the ??? encryption (choose two)
- A. Self-Encrypting Drives
- B. A supported Key Management Server
- C. Nutanix Software Encryption
- D. Nutanix Acropolis Pro Licensing
正解：A、C
質問 # 121
......
Nutanix NCSE-Coreは、ITプロフェッショナルがNutanixソリューションの展開、管理、トラブルシューティングにおける知識とスキルを試験するための認定試験です。この試験は、Nutanixアーキテクチャに関する深い理解（ソフトウェアやハードウェアコンポーネントなど）を持ち、自信を持ってNutanixテクノロジーを実装および管理できる個人を対象としています。
PDF問題（2023年最新）実際のNutanix NCSE-Core試験問題：https://jp.fast2test.com/NCSE-Core-premium-file.html
問題集返金保証付きのNCSE-Core問題集には90%オフ：https://drive.google.com/open?id=1mfmayRAf37A8Gve7wVwHTb6aopK-HRvs