2023年最新の100%無料NSE7_SDW-6.4日常練習試験には82問があります
NSE7_SDW-6.4試験資料Fortinet学習ガイド
Fortinet NSE7_SDW-6.4は、ソフトウェア定義型広域ネットワーク（SD-WAN）の技術分野における個人の知識とスキルをテストするための試験です。この試験は、ネットワークセキュリティの専門家のスキルと知識を検証する包括的なセットであるFortinet Network Security Expert（NSE）認定プログラムの一部です。
Fortinet NSE7_SDW-6.4認定試験は、SD-WANソリューションの設計とトラブルシューティングの実践的な知識を評価するものです。認定プログラムは、SD-WAN接続のセキュリティと最適化、帯域幅の最適化、アプリケーションに適したルーティングの提供、ユーザーとネットワークのパフォーマンスの管理など、主要なトピックをカバーしています。試験は、SD-WANソリューションの展開と最適化のためのベストプラクティスを実装し、セキュリティ、信頼性、パフォーマンスを確保する能力に基づいています。
Fortinet NSE7_SDW-6.4認定試験は、ネットワークプロフェッショナルがSD-WAN技術のスキルと知識を向上させる絶好の機会です。この認定は、SD-WANに特化したネットワークエンジニア、アーキテクト、および管理者にとって理想的であり、試験に合格するには、SD-WAN技術に関する広範な知識と経験が必要です。また、この認定試験に合格することによって、候補者の専門知識が証明されます。
質問 # 46
What would best describe the SD-WAN traffic shaping mode that bases itself on a percentage of available bandwidth?
- A. Interface-based shaping mode
- B. Shared policy shaping mode
- C. Reverse policy shaping mode
- D. Per-IP shaping mode
正解：B
質問 # 47
What are two reasons why it is effective to implement the internet service database (ISDB) in an SD-WAN rule? (Choose two )
- A. The ISDB requires application control to maintain signatures and perform load-balancing.
- B. The ISDB is dynamically updated and reduces administrative overhead.
- C. The ISDB applies rules to traffic from specific sources, based on application type.
- D. The ISDB contains the IP addresses and port ranges of well-known destinations.
正解：B、D
質問 # 48
Which three parameters are available to configure SD-WAN rules? (Choose three.)
- A. Type of physical link connection
- B. Internet service database (ISDB) address object
- C. Application signatures
- D. Source and destination IP address
- E. URL categories
正解：B、C、D
解説：
SD-WAN 6.4.5 Guide Page 76.
質問 # 49
Refer to the exhibit.
Based on the exhibit, which two actions does FortiGate perform on traffic passing through the SD-WAN member port2? (Choose two.)
- A. FortiGate performs routing lookups for new sessions only after a route change.
- B. FortiGate marks the routing information on existing sessions as persistent.
- C. FortiGate flushes all routing information from the session table after a route change.
- D. FortiGate always blocks all traffic after a route change.
正解：A、B
質問 # 50
In the default SD-WAN minimum configuration, which two statements are correct when traffic matches the default implicit SD-WAN rule? (Choose two )
- A. Matched traffic failed RPF and was caught by the rule.
- B. The FIB lookup resolved interface was the SD-WAN member interface
- C. An absolute SD-WAN rule was defined and matched traffic
- D. Traffic has matched none of the FortiGate policy routes
正解：C、D
質問 # 51
Which three parameters are available to configure SD-WAN rules? (Choose three.)
- A. Internet service database (ISDB) address object
- B. Type of physical link connection
- C. Source and destination IP address
- D. URL categories
- E. Application signatures
正解：A、B、C
質問 # 52
Refer to the exhibit.
Which statement about the command route-tag in the SD-WAN rule is true?
- A. It enables the SD-WAN rule to load balance and assign traffic with a route tag
- B. It ensures route tags match the SD-WAN rule based on the rule order
- C. It uses route tags for a BGP community and assigns the SD-WAN rules with same tag.
- D. It tags each route and references the tag in the routing table.
正解：B
質問 # 53
Refer to the exhibit.
Which two statements about the status of the VPN tunnel are true? <Choose two )
- A. 100.64.3.1 is one of the remote IP address that comes through index interface 1.
- B. FortiGate created a single IPsec virtual interface that is shared by all clients.
- C. VPN static routes are prevented from populating the FortiGate routing table.
- D. There are separate virtual interfaces for each dial-up client.
正解：A、B
質問 # 54
Refer to exhibits.
Exhibit A.
Exhibit A shows the performance SLA exhibit B shows the SD-WAN diagnostics output Based on the exhibits, which statement is correct?
- A. SD-WAN member interfaces are affected by the SLA state of the inactive interface
- B. The SLA state of port1 is dead after five unanswered requests by the SLA servers.
- C. Both SD-WAN member interfaces have used separate SLA targets.
- D. Port1 became dead 1ecause no traffic was offload through the egress of port1.
正解：C
質問 # 55
Refer to the exhibit.
Which conclusion about the packet debug flow output is correct?
- A. The original traffic exceeded the maximum bandwidth of the outgoing interface, and the packet was dropped.
- B. The original traffic exceeded the maximum packets per second of the outgoing interface, and the packet was dropped.
- C. The original traffic exceeded the maximum bandwidth configured in the traffic shaper, and the packet was dropped.
- D. The reply traffic exceeded the maximum bandwidth configured in the traffic shaper, and the packet was dropped.
正解：C
質問 # 56
Refer to the exhibit.
Which two statements about the debug output are correct? (Choose two )
- A. FortiGate provides statistics and readings based on historical traffic logs.
- B. This traffic shaper drops traffic that exceeds the set limits.
- C. The debug output shows per-lP shaper values and real-time readings.
- D. Traffic being controlled by the traffic shaper is under 1 Kbps
正解：A、C
質問 # 57
Refer to the exhibit.
Which two statements about the status of the VPN tunnel are true? <Choose two )
- A. 100.64.3.1 is one of the remote IP address that comes through index interface 1.
- B. FortiGate created a single IPsec virtual interface that is shared by all clients.
- C. VPN static routes are prevented from populating the FortiGate routing table.
- D. There are separate virtual interfaces for each dial-up client.
正解：A、B
解説：
If net-device is disabled, FortiGate creates a single IPSEC virtual interface that is shared by all IPSEC clients connecting to the same dialup VPN. In this case, the tunnel-search setting determines how FortiGate learns the network behind each remote client.
質問 # 58
Which two statements about SLA targets and SD-WAN rules are true? (Choose two.)
- A. SLA targets are used only by SD-WAN rules that are configured with Lowest Cost (SLA) or Maximize Bandwidth (SLA) as strategy.
- B. When configuring an SD-WAN rule, you can select multiple SLA targets of the same performance SLA.
- C. Member metrics are measured only if an SLA target is configured.
- D. SD-WAN rules use SLA targets to check if the preferred members meet the SLA requirements.
正解：A、D
質問 # 59
Refer to the exhibit.
Which statement about the trace evaluation by FomGate is true?
- A. Packets exceeding the configured maximum concurrent connection limit are denied by the per-IP shaper.
- B. The packet exceeded the configured bandwidth and was dropped based on the priority configuration.
- C. The packet exceeded the configured maximum bandwidth and was dropped by the shared shaper.
- D. Packets exceeding the configured concurrent connection limit are dropped based on the priority
正解：A
解説：
configuration.
質問 # 60
Which diagnostic command can you use to show the SD-WAN rules interface information and state?
- A. diagnose sys virtual-wan-link route-tag-list
- B. diagnose sys virtual-wan-link member.
- C. diagnose sys virtual-wan-link neighbor.
- D. diagnose sys virtual-wan-link service
正解：D
質問 # 61
Refer to the exhibit.
Which statement about the trace evaluation by FortiGate is true?
- A. Packets exceeding the configured maximum concurrent connection limit are denied by the per-IP shaper.
- B. The packet exceeded the configured bandwidth and was dropped based on the priority configuration.
- C. The packet exceeded the configured maximum bandwidth and was dropped by the shared shaper.
- D. Packets exceeding the configured concurrent connection limit are dropped based on the priority
正解：C
解説：
configuration.
質問 # 62
Refer to exhibits.
Exhibit A shows the firewall policy and exhibit B shows the traffic shaping policy.
The traffic shaping policy is being applied to all outbound traffic; however, inbound traffic is not being evaluated by the shaping policy.
Based on the exhibits, what configuration change must be made in which policy so that traffic shaping can be applied to inbound traffic?
- A. A new firewall policy must be created and SD-WAN must be selected as the incoming interface.
- B. The guaranteed-10mbps option must be selected as the reverse shaper option.
- C. The reverse shaper option must be enabled and a traffic shaper must be selected
- D. The guaranteed-10mbps option must be selected as the per-IP shaper option
正解：B
質問 # 63
Which statement about using BGP routes in SD-WAN is true?
- A. Learned routes can be used as dynamic destinations in SD-WAN rules.
- B. Dynamic routing protocols can be used only with non-encrypted traffic.
- C. Adding static routes must be enabled on all ADVPN interfaces.
- D. VPN topologies must be form using only BGP dynamic routing with SD-WAN.
正解：A
解説：
Explanation/Reference:
https://www.fortinetguru.com/2019/09/using-bgp-tags-with-sd-wan-rules-fortios-6-2/#:~:text=SD%2DWAN%
20rules%20can%20use,to%20the%20customer's%20data%20center.
質問 # 64
Refer to the exhibit.
Which statement about the command route-tag in the SD-WAN rule is true?
- A. It enables the SD-WAN rule to load balance and assign traffic with a route tag
- B. It ensures route tags match the SD-WAN rule based on the rule order
- C. It tags each route and references the tag in the routing table.
- D. It uses route tags for a BGP community and assigns the SD-WAN rules with same tag.
正解：D
解説：
SD-WAN 6.4.5 Guide Page 226.
質問 # 65
Refer to the exhibit.
Based on the output, which two conclusions are true? (Choose two.)
- A. There is more than one SD-WAN rule configured.
- B. The all_rules rule represents the implicit SD-WAN rule.
- C. Entry 1 (id=1) is a regular policy route.
- D. The SD-WAN rules takes precedence over regular policy routes.
正解：A、C
質問 # 66
Refer to the exhibit.
Based on the exhibit, which status description is correct?
- A. Traffic matching the SD-WAN rule is steered through port2.
- B. Port1 is dead because it does not meet the SLA target.
- C. Port2 is alive because its packet loss is lower than 10%.
- D. The SD-WAN members are monitored by different performance SLAs.
正解：A
質問 # 67
What are two roles that SD-WAN orchestrator plays when it works with FortiManager? (Choose two )
- A. It acts as a hub FortiGate with an SD-WAN interface enabled and managed along with other FortiGate devices by FortiManager.
- B. It configures and monitors SD-WAN networks on FortiGate devices that are managed by FortiManager.
- C. It acts as an application that is released and signed by Fortinet to run as a part of management extensions on FortiManager.
- D. It acts as a standalone device to assist FortiManager to manage SD-WAN interfaces on the managed FortiGate devices.
正解：B、C
解説：
SD-WAN 6.4 Guide Page 158.
質問 # 68
Which feature enables SD-WAN to combine IPsec VPN dynamic shortcut tunnels between spokes and a static tunnel to the hub?
- A. SSLVPN
- B. OCVPN
- C. ADVPN
- D. GRE
正解：C
質問 # 69
When attempting to establish an IPsec tunnel to FortiGate, all remote users match the FIRST_VPN IPsec VPN. This includes remote users that want to connect to the SECOND_VPN IPsec VPN. Which two configuration changes must you make on both IPsec VPNs so that remote users can connect to their intended IPsec VPN? (Choose two.)
- A. Configure a unique peer ID.
- B. Configure different Diffie Hellman groups.
- C. Change the IKE mode to aggressive.
- D. Configure different proposals.
正解：A、C
解説：
https://kb.fortinet.com/kb/documentLink.do?externalID=10114
質問 # 70
......
有効な問題最新版を試そうNSE7_SDW-6.4テスト解釈NSE7_SDW-6.4有効な試験ガイド：https://jp.fast2test.com/NSE7_SDW-6.4-premium-file.html
NSE7_SDW-6.4実際の問題解答PDFは100%カバー率でリアル試験問題：https://drive.google.com/open?id=1z_p2PV6tpBWEgSx4RIn_GECgHHz_VIrM