最新 [2024年11月23日]Cisco 300-615試験練習でテストの素晴らしい結果を出そう
あなたのキャリアーを稼いで飛躍せよCisco 300-615
Cisco 300-615試験は、ネットワーキングの分野で優れている専門家にとって重要な認定試験です。この認定は、複雑なデータセンターのインフラストラクチャの問題のトラブルシューティングにおいて、候補者の知識とスキルをテストするように設計されています。認定プログラムは世界的に認識されており、個人が業界の専門家として認識を得るのに役立ちます。
Cisco 300-615試験の候補者は、ネットワークプロトコル、仮想化、ストレージ、およびサーバーテクノロジーを含むデータセンターインフラストラクチャテクノロジーについて確固たる理解を持っている必要があります。また、データセンター環境で複雑な問題をトラブルシューティングする経験があり、Ciscoのデータセンターインフラストラクチャソリューションに精通している必要があります。
質問 # 38
Refer to the exhibit.
An engineer is performing a health check on ACI. Which statement about interface Ethernet 1/11 is true?
- A. "out-of-service" indicates that no service graph is in use for this interface.
- B. The interface is working correctly and fully operational, but it is not in use.
- C. The interface policy is misconfigured.
- D. "out-of-service" is the default interface status in ACI.
正解：C
質問 # 39
Refer to the exhibit.
- A. Use a browser that supports keys of 2048 bits.
- B. Configure a corporate certificate authority for the certificate.
- C. Include a private key with the certificate.
- D. Add a 1536-bit key to the APIC GUI.
正解：A
質問 # 40
Refer to the exhibit.
The EEM script is applied in the default VDC to collect the outputs during high CPU utilization on the Cisco Nexus 7000 Series Switch for all VDCs. Which configuration set must be added to the script to fix the issue?
- A. switch(config-apple)# event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli enable switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution
- B. switch(config-apple)# event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli config t switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution
- C. switch(config-apple)# event snmp 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli config t switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution
- D. switch(config-apple)# event snmp 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli enable switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution
正解：A
解説：
Need exact snap shot to confirm the following.
The selection of is due to
SNMP command has the key word "oid".
The command "switchto vdc Core" show run in "enable" mode, not "config t" mode.
質問 # 41
An engineer must place a Cisco UCS B-Series Server in a single server pool in Cisco UCS Manager.
The engineer creates a qualification policy, but the server is still seen in multiple pools.
Which two actions resolve the issue? (Choose two.)
- A. Set the storage capacity qualifier inside the Server Poo. Policy Qualification.
- B. Set the number of vNICs qualifier inside the Server Pool Policy.
- C. Select the Server Pool Policy Qualification from the qualification drop-down menu in the Server Pool Policy
- D. Select the Server Pool Policy from the qualification drop-down menu in the Server Pool Policy Qualification
- E. Set the operating system qualifier inside the Server Pool Policy Qualification
正解：C、E
質問 # 42
Refer to the exhibit.
The connection between a Cisco Nexus 5548UP switch and a Cisco MDS switch fails to initialize. What is the cause of the issue?
- A. The interface is in an incorrect mode.
- B. Trunk mode must be activated.
- C. The SFP is unsupported.
- D. VSAN 1 is suspended.
正解：B
質問 # 43
Refer to the exhibit. A certificate is implemented on the security configuration on the Cisco ACI controller. A customer receives a "Connection Not Secure" error in a browser every time the customer logs in to the Cisco APIC GUI. Which action resolves the issue?
- A. Include a private key with the certificate.
- B. Configure a corporate certificate authority for the certificate.
- C. Use a browser that supports keys of 2048 bits.
- D. Add a 1536-bit key to the APIC GUI.
正解：A
質問 # 44
Refer to the exhibit.
A new Cisco Nexus 5548 Switch connects to a network. SAN switching is configured on the switch. The switch fc2/10 NP uplink is shown in the exhibit. Which action ensures that fc2/10 is in an up state?
- A. Configure the BB_credit buffers on the upstream switch that connects the port.
- B. Configure the admin port type E on the upstream switch that connects the port.
- C. Replace the SFP port module in fc2/10.
- D. Enable NPIV on the upstream switch that connects the port.
正解：D
質問 # 45
An engineer configures FCoE between a set of ESXi hosts and a Cisco Nexus 5000 Series Switch. The Converged Network Adapter of the host fails to receive the response from the Cisco Nexus device. Also, the VFC interface is in a down state and the FIP adapter fails to receive
802.1q tagged frames. The host interface is configured for VLAN trunking. Which action resolves the issue?
- A. Activate the reception of Xoff pause frames from the server
- B. Enable the active STP port state on the bound Ethernet interface
- C. Set the bound Ethernet trunk interface to non-FCoE native VLAN
- D. Configure the UF link as a spanning-tree edge port
正解：D
質問 # 46
Refer to the exhibit. A network engineer configures OSPF protocol between two Cisco Nexus
7000 Series Switches. The OSPF neighbors fail to synchronize OSPF databases. Which action resolves the issue?
- A. Match the OSPF area between the two devices.
- B. Configure the IP addresses of the interface in the same subnet.
- C. Set the same MTU values on both sides of the link.
- D. Change the OSPF area type to 2 on n7k-1.
正解：C
質問 # 47
A vPC Type-1 inconsistency between two vPC peers in a VXLAN EVPN setup is discovered.
Which two actions need to be attempted to resolve the issue? (Choose two.)
- A. Set a different secondary IP addresses on NVE source-interface.
- B. Set a different distributed gateway virtual MAC address.
- C. Set a different primary IP addresses on NVE source-interface.
- D. Configure the same VNI to multicast group maping.
- E. Configure the NVE interfaces to be Up on both switches.
正解：C、D
解説：
VNI to multicast group mapping must be the same and different primary IP addresses on the NVE source interfaces are required.
https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2018/pdf/LTRDCT-3161.pdf (page 33)
質問 # 48
Refer to the exhibit.
An engineer is troubleshooting why user1, user2, and user3 from group STORAGE- ADMINISTRATOR in Microsoft Active Directory cannot log in to the Cisco MDS SSH CLI. Which action resolves the issue?
- A. Include specific users into MDS role configuration.
- B. Configure SSH logins on Cisco MDS switch.
- C. Configure the role name to match the group name on Microsoft Active Directory.
- D. Integrate Cisco MDS with Microsoft Active Directory.
正解：C
質問 # 49
Refer to the exhibit.
Sw1 and Sw2 are two Cisco Nexus 9000 Series Switches that run Cisco NX-OS. They are VTEPs in the same vPC domain. Which statement describes what happens in this scenario?
- A. Sw1 and switch 2 perform the VxLAN multicast encapsulation and decapsulation for all traffic associated with the VxLAN VNIs, depending on the hashing.
- B. Sw1 drops all traffic because there is no (S, G) OIF list to encapsulate VXLAN multicast packets and send them out to the underlay network through the uplink interfaces.
- C. Sw2 did not send an IP PIM register to the rendezvous point for the multicast group of the VXLAN VNI.
- D. Sw1 performs the VxLAN multicast encapsulation and decapsulation for all traffic associated with the VxLAN VNIs.
正解：D
質問 # 50
Refer to the exhibit.
An engineer monitors a Cisco UCS server logs and discovers a blade discovery issue. Which procedure resolves the issue?
- A. 1. Verify the server power module.
2. Decommission the faulty module.
3. Insert a new power module.
4. Recommission the new module. - B. 1. Verify that server platform power is failed
2. Resolve the platform power issue.
3. Reboot the server.
4. Recommission the server. - C. 1. Verify that the power on self-test operation is failed.
2. Verify that the server firmware is corrupted.
3. Decommission the server firmware
4. Recommission the server with new firmware. - D. 1. Verify the FSM status on the server.
2. Decommission the impacted server.
3. Reset the slot where the server is located.
4. Recommission the server.
正解：D
質問 # 51
Refer to the exhibit. UCS-1 fails to connect to the storage array. Which action resolves the issue?
- A. Implement N-Port Mirtualization on N9K-1.
- B. Set the FI-A mode to FC End Host mode.
- C. Enable N9K-1 mode to N-Port ID Virtualization.
- D. Configure N-Port ID Virtualization on FI-A.
正解：C
質問 # 52
You have an ACI environment with three APICs, two spine switches, and four-leaf switches. You wipe and reboot all APICs first then leaf and spine switches one-by-one and successfully go through the Initial Setuo dialogue on the APIC 1 CIMC KVM console. When you log in to the APIC1 WebGUI, you notice that you do not see any directly connected leaf switches being discovered under Fabric > Inventory > Fabric Membership.
What is the cause of the issue?
- A. The leaf nodes were not erased properly, which caused a fabric parameters mismatch with the APIC1.
- B. Rebooting the APICs and the leaf and spine switches after wiping them is not required.
- C. You forgot to enter the TEP Pool value during the Initial Setup dialogue on APIC1.
- D. The same Fabric Name value should be used before after wiping all devices.
正解：C
質問 # 53
Refer to the exhibit. The fault was raised after a port that belongs to a Cisco UCS chassis I/O module was connected to port 31 of the fabric interconnect. Which action resolves the fault?
- A. Recommission the chassis.
- B. Change chassis discovery policy action to 1 link.
- C. Acknowledge the affected server.
- D. Reconfigure the port as a server port.
正解：D
質問 # 54
Refer to the exhibit.
vPC between switch1 and switch2 is not working. Which two actions are needed to fix the problem? (Choose two.)
- A. Activate VLANs on the vPC.
- B. Configure vPC peer link and vPC peer keepalive correctly.
- C. Configure IP address on the interface.
- D. Configure one of the switches as primary for the vPC.
- E. Match vPC domain ID between the two devices.
正解：A、E
質問 # 55
Refer to the exhibit.
An engineer is troubleshooting why user1, user2, and user3 from group STORAGE- ADMINISTRATOR in Microsoft Active Directory cannot log in to the Cisco MDS SSH CLI. Which action resolves the issue?
- A. Include specific users into MDS role configuration.
- B. Configure SSH logins on Cisco MDS switch.
- C. Configure the role name to match the group name on Microsoft Active Directory.
- D. Integrate Cisco MDS with Microsoft Active Directory.
正解：C
質問 # 56
Refer to the exhibit.
The EEM script is applied in the default VDC to collect the outputs during high CPU utilization on the Cisco Nexus 7000 Series Switch for all VDCs. Which configuration set must be added to the script to fix the issue?
- A. switch(config-apple)# event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli enable switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution
- B. switch(config-apple)# event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli config t switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution
- C. switch(config-apple)# event snmp 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli config t switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution
- D. switch(config-apple)# event snmp 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli enable switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution
正解：A
解説：
Explanation
Need exact snap shot to confirm the following.
The selection of is due to
* SNMP command has the key word "oid".
* The command "switchto vdc Core" show run in "enable" mode, not "config t" mode.
質問 # 57
......
Cisco 300-615認定を獲得することは、データセンターのインフラストラクチャのトラブルシューティングとキャリアを促進する専門知識を実証する素晴らしい方法です。この認定は世界的に認識されており、雇用主によって高く評価されています。試験に合格するには、献身と努力が必要ですが、報酬は努力する価値があります。
正真正銘のベスト資料300-615オンライン練習試験：https://jp.fast2test.com/300-615-premium-file.html
365日更新し続ける300-615最高の問題集はこちら：https://drive.google.com/open?id=1KoOQX0TKqxNTCskkB0iYY7g0bcVpv5pK