Supply Chain Planning Cloud 1z0-1066-22最新問題集で2023年10月18日
2023年最新の問題をマスター！Supply Chain Planning Cloud合格目指そう！1z0-1066-22リアル試験問題集！
質問 # 18
Which three statements are true about a drop ship validation organization? (Choose three.)
- A. It cannot be an item organization.
- B. It is not required in order to use drop shipments.
- C. It can be a Cost Organization.
- D. It is a proxy for the organization during the collections of drop ship sales orders and drop ship history.
- E. It is the source for organization-item attributes when creating drop ship planned orders.
- F. It can be an item organization.
正解：D、E、F
解説：
質問 # 19
Cost accounting captures costed transactions that are picked up by the cost processor. Which is not picked up by the cost processor?
- A. supplier invoices interfaced from Cloud Payables
- B. period close adjusting journal entries for Payroll
- C. invoices and revenue interfaced from Cloud Receivables
- D. shipping, receiving, and inventory transactions from manufacturing
正解：C
質問 # 20
As the planner, you have made some changes to a few of the specifications for items in your simulation sets. You would like to run one of your existing Demand and Supply Plans that contains this simulation set to see how these changes impact the plan.
Which option shows the steps you must complete in order to ensure that when you run your existing Demand and Supply plan, it contains your changes to the simulation set?
- A. When the Demand and Supply Plan is run, verify that 'Recalculate Safety Stock' is selected in the Details section.
- B. You are only able to update one item attribute at a time. Since you have changed multiple attributes, you will be unable to update and run this plan.
- C. No additional steps are necessary. Any plans that contain your simulation set will automatically be updated with the changes.
- D. When the Demand and Supply Plan is run, verify that 'Refresh with current data' is selected in the Details section.
正解：D
質問 # 21
Your client wants to create a supply plan that only considers sales order and disregards forecast demand within a specific demand horizon. What must you do to accomplish this?
- A. Manage Plans > Search and select supply plan > Supply tab > General tab > Advanced Options > Check 'Create time fence'
- B. Manage Plans > Search and select supply plan > Supply tab > General tab > Check Demand Time Fence Control
- C. Manage Plans > Search and select demand plan > Demand tab > General tab > Select 'Do no spread forecast'
- D. Manage Plans > Search and select supply plan > Supply tab > Organizations and Schedules tab > Remove all demand schedules
- E. Manage Plans > Search and select demand plan > Demand tab > General tab > Check Demand Time Fence Control
正解：B
質問 # 22
Each of your planners is responsible for a different geography and set of product lines, so each planner needs to see just their own set of data, analyses and dashboards.
How do you configure the application so each planner can have their own custom dashboard viewable only to themselves?
- A. Create private page layouts that are tailored to specific business needs.
- B. You cannot create custom dashboards by user.
- C. Create public page layouts that are tailored to specific business needs.
- D. Enable layout security checkbox in the Administer Planning Security
正解：A
質問 # 23
Which attribute or attributes can you maintain via the Maintain Supply Network Model task?
- A. For Interlocation Shipping Networks: Carrier. Mode of Transport, and Service Level
- B. For Organizations: Supply Past Due. Customer, and ABC Assignment Group
- C. For Customers. Suppliers, and Organizations: Time Zone
- D. For Carriers: Enabled
正解：C
質問 # 24
Which two statements are true regarding Planning Business Flows? (Choose two.)
- A. You can analyze and adjust data at any stage of the process.
- B. Planners can set up automatic release rules or release orders manually as part of the plan execution.
- C. Demand and Supply Planning have to be run in separate business flows.
- D. In automated plans, all release rules must be automatic.
- E. Inventory Planning cannot run in the Planning Business Flows.
正解：A、B
質問 # 25
You are viewing a drop shipment plan for your organization and you want to know which customer the purchase order will be shipped to. Where can you see that?
- A. You can see the supplier on the sales order, but not vice-versa.
- B. You need to first drill down to the sales order from the supply-demand link, then open the sales order to get the customer.
- C. It is not viewable at this time.
- D. It is visible in the drop ship analytics.
- E. You can see the customer on the supply in Supplies and Demand.
正解：B
質問 # 26
During a client implementation, it is determined that an external forecast will need to be imported into Planning Central for use as a Demand Schedule in a Supply Plan.
What three steps must be executed to enable the successful load of the External Forecast file? (Choose three.)
- A. Collect Legacy Data Process must be run from Planning.
- B. CSV file must be generated.
- C. Collect Planning Data Process must be run from Planning.
- D. Load Interface File for Import Process must be run.
- E. Flat File must be zipped.
正解：A、B、D
質問 # 27
The structure of the Plan Summary Layout is a predefined __________.
- A. Group of Reports
- B. Set of Infotiles
- C. Supply Demand Workbench
- D. Set of Exceptions
- E. Material Plan view
正解：B
質問 # 28
You ran a demand plan with the data refresh option "Do not refresh with current data." Identify two true statements. (Choose two.)
- A. Shipments history data will not be modified.
- B. Shipments forecast data will not be modified.
- C. Forecasting engine will run without advancing the plan date.
- D. Shipments history data will be updated.
- E. Forecasting engine will not run.
正解：A、C
質問 # 29
Which list of parameters is available for selection when you run the Start Backlog Planning scheduled process?
- A. Backlog Priority Rule. Organization. Category. Item. Customer
- B. Priority Rule. Organization. Demand Class, Item. Customer
- C. Demand Priority Rule. Organization. Demand Class. Item. Customer
- D. Demand Priority Rule. Organization. Category. Item, Customer
正解：D
質問 # 30
You have created several infotiles based on the client requirements. You now want to group them together for display. How do you accomplish this?
- A. First build them into an info set in Manage Infosets. Then open the info set on the plan by going to Open (choose area) > Choose info set.
- B. First build them into a planning measure in Manage Planning Measures. Then open the planning measure on the plan by going to Open (choose area) > Choose planning measure.
- C. First build them into a planning group in Manage Planning Groups. Then open the planning group on the plan by going to Open (choose area) > Choose planning group.
- D. First build them into a tile set in Manage Table, Graphs, and Analysis Sets. Then open the tile set on the plan by going to Open (choose area) > Choose tile set.
- E. No need to group them. Open them directly on the plan going to Open (choose area) > Choose Infotile.
正解：D
質問 # 31
When duplicating a supply plan, which parameters can you modify if Copy Type is "copy plan options only"?
- A. Name, Access. Owner, and Notes
- B. Name, Description. Access. Owner. Include Archive, and Notes
- C. Name, Description. Access. Supply Planning Mode, and Owner
- D. Name, Description. Access (but if the original plan was private, you can't edit the Users list), and Notes
正解：A
質問 # 32
A new product has no similar items on which to base a forecast. Which approach is a temporary solution for supply planning?
- A. Consider a simulation of the supply plan's calculated safety stock.
- B. Consider safety stock based on a days-of-cover calculation.
- C. There is no temporary solution.
- D. Use safety stock as demand, until enough shipment history is available.
正解：D
質問 # 33
As a new planner, you want to test simulation set functionality. You have created a simulation set named 'Test Simulation Set.' In this simulation set, you have already added Item 98573. You would like to change the item specification 'Fixed Order Quantity' to 10 within this simulation set.
Which sequence will allow you to accomplish this task?
- A. Select and open 'Test Simulation Set' > Search and select Item 98573 > Highlight item > Select 'Action' > Select 'Edit' > Find Fixed Order Quantity specification> under the 'Action' column select 'set value as' > under the 'Value' column enter 10
- B. Select and open 'Test Simulation Set' > Search and select Item 98573 > Highlight item > Select 'View' > Select 'Columns' > Check box next to Fixed Order Quantity specification> the 'Fixed Order Quantity' will now show on the Item 98573 line > Highlight line for Item 98573 and scroll right until you find 'Fixed Order Quantity' > Change value to 10
- C. Select and open 'Test Simulation Set' > Search and select Item 98573 > Highlight item > Select 'Action' > Select 'Edit' > Find Fixed Order Quantity specification> under the 'Action' column select 'reset to original' > under the 'Value' column enter 10
- D. Select and open 'Test Simulation Set' > Search and select Item 98573 > Highlight line for Item 98573 and scroll right until you find 'Fixed Order Quantity' > Change value to 10
正解：A
質問 # 34
Planners are complaining about getting too many exception messages, some of which have minima value for evaluating plan health.
Which three solutions could reduce message clutter? (Choose three.)
- A. Go to Configure Exception Sets, create a new set with only the messages the planners care about, and then, set all supply plans to use this new exception set.
- B. Go to Configure Exceptions, and specify a threshold for various messages.
- C. Go to Configure Exception Sets, duplicate the currently used exception set, remove the undesired messages from the duplicate set. then assign the duplicate set to all plans.
- D. Go to Configure Exception Sets, and for the currently used exception set. specify a threshold for various messages.
正解：A、C、D
質問 # 35
How does the Demand Fulfillment view prioritize at-risk demands?
- A. Based on order value weighted by the number of compression days required to make the demand no longer at risk
- B. Based on the order value per customer weighted by the number of associated recommendations required to make the demand no longer at risk
- C. Based on the number of associated recommendations required to make the demand no longer at risk
- D. Based on order value weighted by the number of associated recommendations required to make the demand no longer at risk
正解：D
解説：
Review and Improve Your Demand Fulfillment
To improve the demand fulfillment of your plan, use the Demand Fulfillment table to review the at-risk demands in your plan and their related recommendations. You can take actions to accept recommendations from this page.
In the Demand Fulfillment UI, you can:
View prioritized at-risk demands based on order values weighted by the number of associated recommendations.
Take actions to accept or mark recommendations as complete.
Review summary information provided for the current demand fulfillment position of your plan to analyze the potential for improvement based on selected at-risk demands. The information also provides an understanding of the expected demand fulfillment position based on accepted and completed recommendations.
To review and improve your demand fulfillment:
In a Supply Planning, Planning Central, or Demand and Supply work area, select the Manage Plans task.
On the Manage Plans page, search for and open your plan.
In the Page Layout list, select Plan Summary.
Note that the tiles in the Plan Summary layout include a Demand at Risk in thousands tile.
In the Demand at Risk in thousands tile, click the Select Tile bar to review the Demand at Risk Summary data.
You can review the demand at risk data through a treemap view or a table view, the treemap view is the default. To switch to the table view, click the Show Table icon.
To review the demand at risk data:
Using the treemap: Click an area in the treemap. Typically, you want to start with the area that has the highest demand at risk value. From the Drill To actions, click Demand Fulfillment.
Using the table: Click the Show Table icon. In the Demand at Risk Summary table, click a cell. Typically, you want to start with the cell that has the highest demand at risk value. From the Drill To actions, click Demand Fulfillment.
The Demand Fulfillment UI shows the individual orders that are at-risk and their related recommendations.
Tip: You can open the Demand Fulfillment table directly without drilling from the Plan Summary. After you open a plan, click the Open button at the page level. In the Open Table, Graph, or Tile Set dialog box, search for and select the Demand Fulfillment table. In the Demand Fulfillment UI, you can search for at-risk demands by using the filter fields in the search panel.
質問 # 36
Which calendar is supported in the supply planning process but does not support bucketing by week?
- A. Gregorian
- B. Fiscal
- C. Lunisolar
- D. Julian
- E. Roman
正解：D
解説：
質問 # 37
......
完全版は2023年最新の1z0-1066-22試験問題集テストガイドはトレーニング専門Fast2test：https://jp.fast2test.com/1z0-1066-22-premium-file.html
合格準備1z0-1066-22にはFast2testが提供するあなたをOracle Planning and Collaboration Cloud 2022 Implementation Professional試験合格させます顕著練習問題：https://drive.google.com/open?id=1X4TqWzWyXr43_NzZau5iJSCg2Ickwg5z