ベスト良質なJuniper JN0-104試験問題Fast2testリアル練習試験 [2023]
重要な試験問題でJunos, Associate (JNCIA-Junos)一発合格
質問 # 44
What are two benefits of a modular operating system? (Choose two.)
- A. It enables CPU scheduling strictly using kernel system calls.
- B. Each module runs in its own protected memory space.
- C. A malfunction in one module causes a full system shutdown.
- D. It enables the independent restart of each module as necessary.
正解:B、D
質問 # 45
How does the PFE determine how to forward transit traffic?
- A. The PFE uses the forwarding table provided by the RE.
- B. The PFE uses the routing table provided by the
- C. The PFE performs a destination lookup based on its own routing table.
- D. The PFE determines network destinations itself based on the RE's routing table.
正解:A
質問 # 46
Which CLI mode allows you to make configuration changes?
- A. configuration mode
- B. enable mode
- C. shell mode
- D. operational mode
正解:A
質問 # 47
Which statement about the show chassis hardware Command is correct?
- A. The command provides a list of all current hardware utilization statistics and operational status
- B. The command provides a list of supported hardware components and environmental thresholds.
- C. The command provides a list of installed hardware components, including serial numbers and model numbers.
- D. The command provides 2 list of supported hardware components and their current operating status
正解:C
質問 # 48
Click the Exhibit button
You are connecting to a new device in your network and are presented with the information and prompt shown in the exhibit Which three steps must be carried out to edit the configuration on this device? (Choose three.)
- A. Type cli at the > prompt
- B. Log in using the root user with the root 123 password.
- C. Type cli at the = prompt
- D. Log in using the root user with no password.
- E. Type configure at the > prompt.
正解:D、E
質問 # 49
You are asked to configure your Junos device to automatically archive your configuration upon commit.
Which two methods are supported by the Junos OS? (Choose two.)
- A. SCP
- B. RCP
- C. HTTP
- D. FTP
正解:A、D
質問 # 50
Referring to the Exhibit.
What information is provided about the route to 192.168.47.0/24? Choose Two
- A. There are two active route to 192.168.47.0/24
- B. There are two next-hops available to 192.168.47.0/24
- C. There is a single next-hop available to 192.168.47.0/24
- D. There is a single active route to 192.168.47.0/24
正解:B、D
質問 # 51
You have been assigned the 66.96.130.0/24 network and need to segment it into at least 60 subnets.
Which network mask meets this requirement?
- A. /28
- B. /29
- C. /27
- D. /30
正解:D
質問 # 52
Which two statements are correct regarding default protocol preference values?
- A. OSPF's preference value is lower than BGP.
- B. OSPF has a single preference value for both internal and external routes.
- C. Direct, local, and static routes have the same preference value.
- D. RIP is preferred over OSPF external routes.
正解:A、D
質問 # 53
You must configure the 2bfc:0000:0000:beet.0217:cbff:0000:5c85 IPv6 address on your device.
In this scenario, which three addresses are correct? (Choose three.)
- A. 2BFC::BEEF:0217CBFF:0:5C85
- B. 2bfc:0:beef:0217:cbff:0:5c85
- C. 2bfc::beef:217:cbff:0:5c85
- D. 2bfc:0:0:beef:0217:cbff:0:5c85
- E. 2BFC::BEEF:217:CBFF::5C85
正解:A、C、D
質問 # 54
Which of these commands can be used to configure an IP address on an interface? (Choose two)
- A. set interfaces ge-0/0/0.0 address 192.168.1.1/24
- B. set interfaces ge-0/0/0 unit 0 family inet address 192.168.1.1/24
- C. set interfaces ge-0/0/0.0 family inet address 192.168.1.1/24
- D. set interfaces ge-0/0/0 address 192.168.1.1/24
正解:B、C
質問 # 55
Exhibit:
You notice traffic destined to 172.31.17.0/24 is traversing an OSPF path rather than BGP Path.
What is causing this behavior?
- A. The 172.31.17.0/24 BGP route is missing a valid default next hop
- B. The 172.31.17.0/24 route does not have a valid BGP entry
- C. The 172.31.17.0/24 BGP has a higher route preference
- D. The 172.31.17.0/24 BGP route's outgoing interface is down
正解:C
質問 # 56
Exhibit:
Refer to exhibit, what will be the result?
- A. The device will boot in a multi-user mode at the shell prompt
- B. The device will boot in a Single-user mode at the shell prompt
- C. The device will boot in a Single-user mode at the operational prompt
- D. The device will boot in a multi-user mode at the configuration prompt
正解:D
質問 # 57
Which two statements are true about the rescue configuration file? (Choose two.)
- A. It gets updated automatically when you commit.
- B. You need to create it using the command request system configuration rescue save.
- C. It is rollback file number 50 and you can recover it by issuing rollback 50.
- D. You can load it by entering rollback rescue.
正解:B、D
質問 # 58
Which two keystrokes are used to auto-complete commands? (Choose two.)
- A. Spacebar
- B. End
- C. Esc
- D. Tab
正解:A、D
質問 # 59
Which of these commands will save the current active configuration as the rescue configuration?
- A. user@router# save | rescue
- B. user@router> file save rescue-configuration
- C. user@router> request system configuration rescue save
- D. user@router# save rescue configuration
正解:C
質問 # 60
Which two statements about login classes are correct? (Choose two.)
- A. There are no system-defined login classes.
- B. Login class permissions can be overridden for certain commands.
- C. Users can be members of multiple login classes.
- D. Login classes define access privileges for a user.
正解:B、D
質問 # 61
What are three benefits of using IPv6?
- A. IPv6 reduces administrative overhead using stateless address autoconfiguration for hosts.
- B. IPv6 represents large IP addresses using dotted decimal notation.
- C. IPv6 eliminates the need for private to public NAT using a large address pool.
- D. IPv6 provides backward compatibility with IPv4 using the Next Header field.
- E. IPv6 supports a greater level of security by integrating features that were optional add-ons in IPv4.
正解:A、C、E
質問 # 62
......
JN0-104試験問題集合格保証:https://jp.fast2test.com/JN0-104-premium-file.html
ベスト良質なJuniper JN0-104試験問題:https://drive.google.com/open?id=12jBJIAikPRLm6tdBQinKnrb4xTu1Zpwd