2022年最新のに更新された検証済みの合格させるJN0-104学習ガイドベスト問題集を使おう Courses
究極なガイドはJN0-104最新版限定公開
質問 42
Which routing table is used for multicasting forwarding cache?
- A. Inet.3
- B. Inet.0
- C. Inet.2
- D. Inet.1
正解: D
質問 43
Which command will completely turn off a Junos device?
- A. request chassis fpc offline
- B. request system recover
- C. request system halt
- D. request system power-off
正解: D
質問 44
Which two statements describe the connection between control plane and the forwarding plane? Choose Two
- A. No rate limiter is configured by default
- B. A rate limiter is configured by default
- C. Exception traffic is preferred over the control traffic during congestion
- D. Control traffic is preferred over the exception traffic during congestion
正解: A,D
質問 45
Routing policies contain which two types of statements? (Choose two.)
- A. from
- B. then
- C. and
- D. default
正解: A,B
質問 46
What are two benefits realized by the disaggregated Junos? (Choose two.)
- A. There is increased flexibility to use different control plane versions.
- B. The Junos VM becomes hardware-independent and can be deployed on any hypervisor without modification.
- C. The platform drivers and forwarding engine are removed from the control plane to increase performance.
- D. The architecture facilitates programmability through provisioning the control plane, the data path, and the platform APIs.
正解: C,D
質問 47
Which command displays all IPv4 routes in the default routing instance?
- A. show route table inet.0
- B. show route table inet6.0
- C. show route table inet.1
- D. show route table inet.2
正解: A
質問 48
Referring to the exhibit,
Which next-hop interface will be used to reach the 10.21.14.16 destination?
- A. ge-0/0/2.0
- B. ge-0/0/1.0
- C. ge-0/0/3.0
- D. ge-0/0/0.0
正解: B
質問 49
What is the purpose of the discard action of a firewall filter?
- A. The system drops the packet and logs the entry.
- B. The system drops the packet and sends an ICMP message.
- C. The system evaluates the next term in the policy.
- D. The system silently drops the packet.
正解: D
質問 50
Referring to the exhibit, which dynamic routing protocol would be used for this topology?
- A. RIP
- B. RIPng
- C. OSPFv2
- D. IGMPv3
正解: B
質問 51
What is the default location of the syslog file on Junos devices?
- A. /var/log/
- B. /var/tmp/
- C. /var/home/
- D. /var/db/
正解: A
質問 52
Click the Exhibit button.
A user attempts to log in to a Junos device. but the RADIUS server is unreachable.
Referring to the exhibit, what is the default action of a Junos device in this scenario?
- A. The Junos device displays a RADIUS connection error.
- B. The Junos device prompts for a cached RADIUS password.
- C. The Junos device uses the local authentication database.
- D. The Junos device retries every 30 seconds until the connection is restored.
正解: A
質問 53
Click the Exhibit button.
Referring to the exhibit, which command was issued to generate the output?
- A. show chassis hardware
- B. show chassis environment
- C. show chassis routing-engine
- D. show chassis fpc
正解: A
質問 54
You are connected to your Junos device using an SSH connection to the txp0 interface. No other interfaces are currently configured and unreachable from your management network.
How would you reestablish communication with the device?
- A. Establish a SSH connection to the loopback interface
- B. Unplug the network cable and plug it back in
- C. Power off and power on the device
- D. Connect to the console of the device
正解: D
質問 55
Which two statements are true about static routes in the Junos OS (Choose Two)
- A. Static routes remain in the routing table until you remove them or until they become inactive
- B. Static routes are defined at the [edit routing-instance] hierarchy
- C. Static routes are learned by neighboring devices and added to their routing tables
- D. Static routes must have next hop defined
正解: A,D
質問 56
Which three statements describe OSPF? (Choose three)
- A. OSPF calculates the best path to each destination
- B. OSPF uses a distance-vector algorithm to calculate routing cost
- C. OSPF uses areas to incorporate hierarchy and to allow for scalability
- D. OSPF must operate between different autonomous system
- E. OSPF is a link-state IGP
正解: A,C,E
質問 57
What is the initial prompt displayed when logging in as the root user?
- A. root@router#
- B. root@router%
- C. root@router>
- D. root@router*
正解: B
質問 58
Which command produced the output shown in the exhibit?
- A. Show interfaces terse
- B. Show interfaces extensive
- C. Show interfaces summary
- D. Show interfaces filters
正解: A
質問 59
Which command displays the output shown in the exhibit?
- A. show chassis temperature-thresholds
- B. show chassis environment
- C. show chassis hardware
- D. show chassis alarms
正解: B
質問 60
How would you change the display so that 40 lines will be displayed in the terminal program when you are logged into a Junos device?
- A. Issue the set cli screen-length 40 command from configuration mode
- B. Set the window size of your terminal program.
- C. Issue the set cli screen-length 40 command from operational mode.
- D. Set the display options in your terminal program.
正解: C
質問 61
Which two features are implemented on the Packet Forwarding Engine? (Choose Two)
- A. Routing protocol update
- B. Firewall Filters
- C. Class of Service
- D. Chassis Management
正解: B,C
質問 62
What information would you find using the CLI help function? (Choose two.)
- A. explanation of traceoption events
- B. explanation of specific system log error messages
- C. tip of the day
- D. Junos technical publications
正解: B,C
質問 63
......
問題集で返金保証付きのJN0-104承認済み問題集：https://jp.fast2test.com/JN0-104-premium-file.html
2022年最新のに更新された検証済みの合格させるJN0-104試験にはリアル問題解答：https://drive.google.com/open?id=12jBJIAikPRLm6tdBQinKnrb4xTu1Zpwd