VMCE2021練習Veeam高合格率回答あなたを試験は高確率で合格させます！[2023]
最高の方法からパスVMCEのVMCE2021試験合格させます
質問 # 35
Which Veeam backup & Replication functionality allows a VM to be powered on a directly from a backup file?
- A. Full VM Recovery
- B. Instant VM Recovery
- C. Planned Failover
- D. Item-Level Recovery using Veeam Explorers
正解：B
解説：
https://helpcenter.veeam.com/docs/backup/vsphere/quick_migration.html?ver=95
質問 # 36
If a VM is restored to its original location via Full VM restore while the original VM still exists, the original VM will be:
- A. Copied to another location specified in the settings
- B. Renamed automatically
- C. Backed up and stored at the same location
- D. Deleted
正解：D
解説：
https://helpcenter.veeam.com/docs/backup/vsphere/full_recovery.html?ver=95
質問 # 37
At 18:00, after a Windows update installation, a VM is stuck in an infinite boot loop. The VM is configured as follows. The last backup was created at 01:00. Choose the recovery approach that provides the lowest RTO with the least data loss.
- A. Instant VM Recovery
- B. Virtual disk restore of Disk 1
- C. VM disk recovery with quick rollback of Disk 1
- D. Instant VM Recovery with quick rollback
正解：B
解説：
https://helpcenter.veeam.com/archive/backup/110/vsphere/incremental_restore.html
質問 # 38
In Veeam Backup & Replication, encryption works at which of the following levels:
(Choose three.)
- A. Backup job
- B. VM Copy job
- C. Tapes in media pools
- D. Replication job
- E. Backup Copy job
正解：A、C、E
解説：
https://helpcenter.veeam.com/docs/backup/vsphere/data_encryption.html?ver=95
質問 # 39
To suppress Veeam ONE alarms under specific conditions or when a specific event occurs, which of these options can be selected? (Choose three.)
- A. Storage snapshot creation
- B. Veeam backup activity
- C. High CPU usage
- D. Snapshot deletion
- E. Storage snapshot deletion
- F. Snapshot creation
正解：B、D、F
解説：
https://helpcenter.veeam.com/docs/one/alarms/alarm_suppression.html?ver=100
質問 # 40
Which Veeam Backup & Replication component or service should be added to the scenario below in order to optimize backups to an off-site CIFS share?
- A. A WAN Accelerator service in the remote location
- B. An additional Data Mover service on the Veeam Backup & Replication server
- C. A Windows-based gateway server in the remote site
- D. In additional backup repository in the remote site
正解：A
質問 # 41
The backup administrator configured replication for a VM from Data Center 1 to Data Center 2, which runs every day at 1 a.m. A power surge takes out Data Center 1 at 7 a.m. and the administrator fails over the replica at 8 a.m. When the power comes back on, the administrator performs the "failback" action at 2 p.m. and checks the state of the original VM. They recognize that not all data is available. What is missing?
- A. Data from 8 a.m. to 2 p.m.
- B. Data from 1 a.m. to 7 a.m.
- C. Data from 1 a.m. to 2 p.m.
- D. Data from 7 a.m. to 8 a.m.
正解：B
解説：
https://helpcenter.veeam.com/docs/backup/vsphere/failback.html?ver=100
質問 # 42
A director in a business needs a folder of traffic photos restored from a Linux server. This machine sits on a VM backed up by Veeam Backup & Replication. The director wants the files restored to their original location and does not want to lose the original files. What functionality will be used to restore the folder using the Veeam Guest OS restoration wizard?
- A. Restore the files using the "Overwrite" function. Original files will be renamed.
- B. Restore the files using the "Keep" function. Original files will be untouched
- C. Restore the files using the "Hold" function. The director can then determine the status of the original and restored files.
- D. Restore the files using the "Versioning" function. Files will be prefixed with numbers (1-, 2-, 3-, etc.).
正解：B
解説：
According to the Veeam Backup & Replication user guide1, you can use the Guest File Restore wizard to restore files and folders from VM guest OSes that run Linux or other non-Windows OSes2. The wizard allows you to choose how to handle situations when restored files already exist on the target location3.
Therefore, if you want to restore the folder of traffic photos to their original location and do not want to lose the original files, you should use the Keep function. This function will preserve original files on disk and will not overwrite them with restored files
質問 # 43
In the event a VMware VM configuration file (VMX) is missing and a restore is needed, what Veeam restore process is the best choice for this situation?
- A. Instant disk recovery
- B. VM file restore
- C. Instant VM recovery
- D. Virtual disk restore
正解：B
解説：
https://helpcenter.veeam.com/docs/backup/vsphere/vmfile_recovery.html?ver=100
質問 # 44
Which of the following jobs can use a Scale-Out Backup Repository as a target? (Choose two appropriate options)
- A. A configuration backup job
- B. A VM copy job
- C. A replication job (for storing replica metadata)
- D. A backup copy job
- E. A backup job
正解：D、E
解説：
https://helpcenter.veeam.com/docs/backup/vsphere/backup_repository_sobr.html?ver=95
質問 # 45
Which of the following services are installed on every Veeam backup proxy server? Choose two options.
- A. Veeam Data Mover Service
- B. Veeam Distribution Service
- C. Veeam Backup Catalog Service
- D. Veeam Backup Service
- E. Veeam Installer Service
正解：A、E
解説：
Explanation
Refer to https://helpcenter.veeam.com/docs/backup/vsphere/backup_proxy.html?ver=100
質問 # 46
Which backup mode uses the file extension .vib for incremental backup files?
- A. Reverse incremental backup
- B. Forever forward incremental backup
- C. Veeam Backup & Replication does not create files with the .vib extension
- D. Veeam Backup & Replication always creates .vib files to store increments and rollbacks
正解：B
解説：
https://helpcenter.veeam.com/docs/backup/hyperv/forward_incremental_backup.html?ver=95
質問 # 47
which actions can be used to locate the exact extent of a scale-out backup repository containing a particular VM's backup data? Choose two options.
- A. Open the extent repositories manually
- B. Check the inventory view for the specific VM
- C. Check backup proxy settings
- D. Check the specific VM in the job statistics
- E. Check scale out backup repository settings
正解：D、E
質問 # 48
Veeam Extract utility can be used to recover VMs from a full backup file (VBK). The extract utility does not require any interaction with Veeam Backup & Replication and can be used as an independent tool on Linux and Microsoft Windows machines.
Where is Veeam Extract utility located?
- A. On the Veeam website in the Free tools section and in the Veeam Backup & Replication ISO file
- B. %PROGRAMFILES%\Veeam\Backup and Replication\Backupfolder
- C. %PROGRAMDATA%\Veeam folder
正解：B
解説：
Where is Veeam Extract utility located
質問 # 49
Does the Planned Failover feature shut down the production VM?
- A. No, the production VM will keep running
- B. A pop-up window prompts the user to choose whether the production VM should shut down
- C. No, but the production VM is temporarily suspended
- D. Yes
正解：D
解説：
https://www.veeam.com/vm-advanced-replication.html
質問 # 50
Veeam Backup & Replication supports which of the following NetApp Data ONTAP modes?
- A. Clustered Data ONTAP only
- B. Both 7-mode and Clustered Data ONTAP
- C. Only NatApp EDGE in 7-Mode
- D. 7-mode only
正解：B
質問 # 51
Which of the following is a backup mode that can be configured within a Veeam Agent for Windows backup job?
- A. Forward incremental and reverse incremental, both with optional periodic synthetic and/or active full backups
- B. Reverse incremental with optional periodic synthetic full backups
- C. Reverse incremental with periodic active full backups
- D. Forward incremental with optional periodic synthetic and/or active full backups
正解：D
解説：
Explanation
https://helpcenter.veeam.com/docs/agentforwindows/userguide/backup_chain.html?ver=40
質問 # 52
......
Veeam VMCE2021事前に試験練習テストFast2test: ：https://jp.fast2test.com/VMCE2021-premium-file.html