[Q13-Q38] 最高のVMCE2021のPDF問題集100%Fast2test試験合格率保証 [2024年01月]

Share

最高のVMCE2021のPDF問題集100%Fast2test試験合格率保証 [2024年01月]

Fast2testの問題集で100%あなたのVMCE2021 VMCE 2021試験を一発合格

質問 # 13
A backup administrator is deploying a Veeam ONE environment. They have chosen to use separate servers from their Veeam Backup & Replication environment. What benefit will they receive if they install the Veeam ONE Agent onto their backup server?

  • A. Analyze Veeam Backup & Replication log data and retrieve signature updates
  • B. Collect Veeam Backup & Replication logs and execute remediation actions
  • C. Track whether VMs and agents are properly protected and following the 3-2-1 rule
  • D. Collect virtual environment configuration from Veeam Backup & Replication

正解:B

解説:
Veeam ONE agent is responsible for collecting logs and executing remediation actions.
https://helpcenter.veeam.com/docs/one/monitor/intelligent_diagnostics.html?ver=100


質問 # 14
Which of the following describes the Partial Site Failover functionality of Veeam Cloud Connect?

  • A. A cluster is formed out of hosts on the production site and cloud hosts to in case of one or several hosts malfunctions the workloads are passed to the cloud.
  • B. End users are able to failover to the DR site proactively if they know that the primary VMs are going to go offline (e.g. the production host is going to be patched)
  • C. One or several VMs become corrupted and fail over to their replicas on the cloud host, while other VMs will still be running in the production site.
  • D. One or several applications malfunctions and they start running from a web server in cloud set up by SP.

正解:C


質問 # 15
A company has separate networks for management traffic and data traffic. All Veeam components are communicating over the management network. How would they define the data network for backup data transfers?

  • A. Create a global network traffic rule, set appropriate source and target IP range
  • B. Use the preferred network settings to switch to data network for the backup traffic
  • C. Update routing tables on the components involved in data transfer
  • D. Re-add all Veeam components involved in data transfer through the required interfaces

正解:B

解説:
https://helpcenter.veeam.com/docs/backup/vsphere/select_backup_network.html?ver=100


質問 # 16
When a file is copied using a backup copy job, which of the following should be the same for the restore point on the source backup repository, and the restore point on the target backup repository?

  • A. Encryption key
  • B. Backup repository type
  • C. Creation frequency
  • D. Data block size

正解:D

解説:
The data block size for restore points on the target backup repository is set at the first synchronization cycle of the backup copy job.


質問 # 17
A backup administrator needs to restore two data drives to a VM where the operating system remains intact.
The target machine must remain powered on. What recovery option is most appropriate to perform this operation?

  • A. Restore VM files
  • B. Restore entire VM
  • C. Instant disk recovery
  • D. Instant VM Recovery

正解:C

解説:
Explanation
https://helpcenter.veeam.com/docs/backup/vsphere/instant_disk_recovery.html?ver=100


質問 # 18
Which is a prerequisite in order for the CRC check to be executed during a SureBackup Job?

  • A. The repository where the backup is stored is a Shared Folder (CIFS/SMB)
  • B. The .vbm file is corrupt
  • C. The Backup file integrity check option was enabled in the SureBackup job settings
  • D. One or more of the SureBackup recovery verification tests failed

正解:C


質問 # 19
Why is it recommended to install Veeam ONE before Veeam Backup & Replication?

  • A. Veeam ONE can assess the Infrastructure for potential Issues prior to performing a backup.
  • B. Veeam ONE is a prerequisite for Veeam Backup & Replication Installation.
  • C. It Is recommended to add all of the servers involved in the backup process to Veeam ONE first, and then import the configuration to Veeam Backup & Replication
  • D. Veeam ONE verify that the server where Veeam Backup & Replication will be Installed meets all system requirements.

正解:A


質問 # 20
Select the correct description of a synthetic full backup.

  • A. A synthetic full backup combines a VBK file with one or more VIB files from a repository to generate a new VBK file
  • B. A synthetic full backup will generate a new VBK file by getting data from the hypervisor
  • C. A synthetic full backup will update the existing VBK with data from the hypervisor and generate a new VRB file
  • D. A synthetic full backup combines a VIB file with one or more VBK files from a repository to generate a new VBK file

正解:B


質問 # 21
In Veeam Backup & Replication, encryption can be enabled at rest for following: (Choose three.)

  • A. Replication job
  • B. Tapes in media pools
  • C. Backup job
  • D. Backup Copy job
  • E. Backup to tape job

正解:C、D、E

解説:
https://bp.veeam.com/vbr/Support/S_Encryption/tape.html


質問 # 22
When you back up regular or standalone VMs in vCloud Director, which of the following is captured and stored in Veeam's Backup & Replication backup file? (Choose three.)

  • A. In-guest iSCSI disk
  • B. Raw device mapping
  • C. Linked clone VM's prior to vCenter 6.5
  • D. VM metadata
  • E. vApp metadata
  • F. VM disk content

正解:D、E、F

解説:
https://helpcenter.veeam.com/docs/backup/vsphere/vcloud_regular_vm_restore.html?ver=


質問 # 23
Which of the following statements are true when considering the Forever Forward Incremental backup method, on a NTFS-based backup repository? (Choose two.)

  • A. Even when retention is breached, only sequential writes to the backup repository are performed
  • B. The most recent restore point in the backup chain is always a full backup
  • C. In between job run, the storage always contains the number of restore points indicated in the backup job settings
  • D. The merge process can cause a heavy I/Q load on the repository

正解:C、D

解説:
https://helpcenter.veeam.com/docs/backup/vsphere/incremental_forever_backup.html?ver=110


質問 # 24
Which of the following statements regarding bottleneck statistics is true?

  • A. Bottleneck statistics can show the following states: Source/Proxy/Network/Source WAN Accelerator/Target WAN Accelerator/Target/None
  • B. Bottleneck statistics can show the following states: Source/Ptoxy/Network/Source WAN Accelerator/Target WAN Accelerator/Target
  • C. The bottleneck statistics are only displayed when you have a problem in your backup infrastructure.
  • D. The percentages displayed will always add up to 100% in total.

正解:D


質問 # 25
A physical Linux server protected by a centrally managed Veeam agent is physically damaged. A VMware vSphere infrastructure is available, and the physical server is eligible for virtualization. Which recovery step provides the lowest possible RTO?

  • A. Use Bare Metal Restore to VMware vSphere VM.
  • B. Use Instant VM Recovery to VMware vSphere.
  • C. Use Instant Disk Recovery to VMware vSphere.
  • D. Use Export Disk Content as Virtual Disk to create a new VM.

正解:B

解説:
According to the Veeam Agent for Linux User Guide1, you can use the Restore volumes option to perform bare metal recovery of your computer. However, this option requires you to boot from the Veeam Recovery Media and may take some time to complete.
Another option is to use Instant VM Recovery to VMware vSphere. This option allows you to run your Linux computer directly from a backup file as a VMware VM without restoring any data. This can significantly reduce your RTO and provide immediate access to your applications and data.


質問 # 26
Which HPE SAN storage systems are supported by the Backup from Storage Snapshots feature in Veeam Backup & Replication? Choose three options.

  • A. HPE StoreEasy Storage
  • B. HPE 3PAR StoreServ
  • C. HPE StoreOnce
  • D. HPE StoreVirtual and StoreVirtual VSA
  • E. HPE Nimble Storage AF-series and CS-series

正解:B、D、E


質問 # 27
Which transport mode uses the VMware vSphere Hot-Add feature to attach the virtual disks of a source VM to the Backup Proxy VM?

  • A. Network
  • B. vPower
  • C. Direct SAN Access
  • D. Direct NFS Access
  • E. Virtual Appliance

正解:E

解説:
https://helpcenter.veeam.com/docs/backup/vsphere/virtual_appliance.html?ver=95


質問 # 28
A Backup Administrator needs to create an offsite backup job and wants to store the backups on a NFS share at the remote site. Which of the following actions would result in the most optimal configuration?

  • A. Mount the NFS share on a Linux server at the remote site, then add the server as a Veeam Backup Repository
  • B. Mount the NFS share on a Linux server at the production site, then add the server as a Veeam Backup Repository
  • C. Place one Veeam Data Mover Service at the remote site
  • D. The scenario is not supported
  • E. Place on Veeam Data Mover Service at the production site

正解:A


質問 # 29
A company has separate networks for management traffic and data traffic. All Veeam components are communicating over the management network. How would they define the data network for backup data transfers?

  • A. Create a global network traffic rule, set appropriate source and target IP range
  • B. Use the preferred network settings to switch to data network for the backup traffic
  • C. Update routing tables on the components involved in data transfer
  • D. Re-add all Veeam components involved in data transfer through the required interfaces

正解:A

解説:
https://helpcenter.veeam.com/docs/backup/hyperv/select_backup_network.html?ver=100


質問 # 30
Which of the following services are installed on every Veeam backup proxy server? Choose two options.

  • A. Veeam Data Mover Service
  • B. Veeam Backup Catalog Service
  • C. Veeam Backup Service
  • D. Veeam Installer Service
  • E. Veeam Distribution Service

正解:A、D

解説:
Refer to https://helpcenter.veeam.com/docs/backup/vsphere/backup_proxy.html?ver=100


質問 # 31
A physical Windows file server protected by Veeam Agent for Windows needs to be migrated to a local VMware ESXi. The server has several volumes: C: (60GB), D: (1TB) and E: (4TB). What is the quickest option to migrate the server to a local VMware ESXi host?

  • A. Perform Instant Disk Recovery for each volume.
  • B. Perform Instant VM Recovery.
  • C. Export all disks, create an empty VM and attach the disks.
  • D. Create an empty VM and perform bare metal recovery inside the VM.

正解:C


質問 # 32
A file on a Linux VM hosted on Hyper-V is corrupted and must be restored. Which of the following restore methods provides the best possible RTO?

  • A. Run Veeam Extract Utility and use "copy to" to download the file locally in a shared folder.
  • B. Start a virtual lab and boot the Linux VM image in an application group, then copy the file directly from the image to the Linux VM.
  • C. File-level restore for Linux is not supported on Hyper-V.
  • D. Run Veeam file restore wizard and let it restore through the network.

正解:A


質問 # 33
A company has replicated their critical application VMs to a second data center in another region. Their key application includes two database VMs and three application VMs. For proper operation, the database VMs need to start before the application VMs. What needs to be configured in Veeam to prepare for a disaster recovery situation?

  • A. Use Instant VM Recovery
  • B. Use a planned failover
  • C. Use on-click failover
  • D. Use a failover plan

正解:D


質問 # 34
Which of the following can be restored from tape using Veeam backup& Replication? (Choose two.)

  • A. Guest OS files directly back to the production virtual machine
  • B. Full virtual machine directly back to the production hypervisor
  • C. Full virtual machine via a staging area back to the hypervisor
  • D. Host IP Configuration
  • E. Application Items, using Veeam Explorers, directly back to the production virtual machine

正解:B、C


質問 # 35
Select the correct description of a synthetic full backup.

  • A. A synthetic full backup combines a VBK file with one or more VIB files from a repository to generate a new VBK file
  • B. A synthetic full backup will generate a new VBK file by getting data from the hypervisor
  • C. A synthetic full backup will update the existing VBK with data from the hypervisor and generate a new VRB file
  • D. A synthetic full backup combines a VIB file with one or more VBK files from a repository to generate a new VBK file

正解:B

解説:
https://helpcenter.veeam.com/docs/backup/hyperv/synthetic_full_backup.html?ver=100


質問 # 36
A financial company is looking for a new backup application. One of their main requirements is the ability to have quick access to their backup data. What features in Veeam Backup & Replication support the rapid availability of data, applications and VMs? (Choose three.)

  • A. Instant VM Recovery
  • B. Full VM recovery without quick rollback
  • C. Microsoft SQL database, and Oracle database publishing
  • D. Instant VM disk recovery
  • E. Bare metal recovery
  • F. Restore to Amazon EC2

正解:A、C、D


質問 # 37
Which of the following is an additional database restore option in the Veeam Explorer for Microsoft SQL?

  • A. RECOVERY
  • B. SIMPLE
  • C. ACTIVE
  • D. NORECOVERY

正解:A


質問 # 38
......

トレンドなVMCE2021のPDF問題集を受験前に使おう:https://jp.fast2test.com/VMCE2021-premium-file.html


弊社を連絡する

我々は12時間以内ですべてのお問い合わせを答えます。

我々の働いている時間: ( GMT 0:00-15:00 )
月曜日から土曜日まで

サポート: 現在連絡 

English Deutsch 繁体中文 한국어