あなたを余裕でC-TS411-2022試験合格させます！100%試験高合格率保証 [2024]
C-TS411-2022問題集本日限定！無料アクセスが可能に！fromFast2test
質問 # 29
You activate the check for same classification inside basic data screen of your class. Which restrictions are available?
Note: There are 2 correct Answers to this question.
- A. The classification is only checked when you have assigned values to some characteristics.
- B. The classification is only checked for objects connected to several classes.
- C. The classification is only checked for objects connected to one class.
- D. The classification is only checked when you have assigned values to all characteristics.
正解：C、D
質問 # 30
A procedure sets the value V2 for characteristic C2 when the value V1 is set for characteristic C1.How do you assign and define this procedure?Note: There are 3 correct Answers to this question.
- A. Procedure to the value V1 with the following syntax: $self.C2 = 'V2' (not recommended)
- B. Procedure to characteristic C2 using the following syntax: $self.C1 = 'V1' if $self.C2 = 'V2' (not recommended)
- C. Procedure to characteristic C1 using the following syntax: $self.C2 = 'V2' if $self.C1 = 'V1' (not recommended)
- D. Procedure to the value V2 with the following syntax: $self.C1 = 'V1' (not recommended)
- E. Procedure with the following syntax to the configuration profile: $self.C2 = 'V2' if $self.C1 = 'V1' (recommended)
正解：A、C、E
質問 # 31
You connected characteristics inside one class to organizational areas. What are the benefits?Note:
There are 2 correct Answers to this question.
- A. Users can always see all characteristics for all areas.
- B. A check for the same classification is possible for all organizational areas.
- C. A check for the same classification is only possible inside one organizational area.
- D. Users can only work with characteristics depending on the authorization for a particular organizational area.
正解：B、C
質問 # 32
Which features are available when working with the Manage Documents app?Note: There are 2 correct Answers to this question.
- A. All information is displayed on only one page.
- B. A secure storage area can be selected manually.
- C. A secure storage area is selected automatically.
- D. An object link to every SAP Object can be defined.
正解：A、C
質問 # 33
There are item categories that are only allowed in configurable BOMs.What do you have to keep in mind when working with configurable routings?Note: There are 3 correct Answers to this question.
- A. All sequence categories can be used in non-configurable and configurable routings.
- B. All types of operation can be used in non-configurable and configurable routings.
- C. All production resources/tools catgories can be used in non-configurable and configurable routings.
- D. Alternative sequences may only be used in configurable routings.
- E. Equipment as production resources/tools may only be used in configurable routings.
正解：B、D、E
質問 # 34
Which type of object dependencies must contain $self, $parent, or $root at least once?
- A. Pre- and Selection Conditions
- B. All types of object dependencies
- C. Constraints
- D. Procedures
正解：C
質問 # 35
How can you restrict the search result?Note: There are 2 correct Answers to this question.
- A. Filters
- B. Reselect
- C. Validity
- D. Change number
正解：A、B
質問 # 36
Where can you specify a processing sequence during an assignment?
- A. Pre- and Selection Conditions
- B. Constraint Nets
- C. Constraints
- D. Procedures
正解：D
質問 # 37
What do you have to keep in mind when creating a Product Master from scratch?Note: There are 2 correct Answers to this question.
- A. An industry sector can be selected.
- B. No view selection screen becomes visible.
- C. No organizational levels are asked.
- D. Only files can be connected and uploaded, no document info records.
正解：B、C
質問 # 38
You are working with VC Modeling Environment PMEVC. Complete object dependencies are created by drag & drop of one or more characteristic values into a BOM item.What can be created with this drag & drop functionality?Note: There are 2 correct Answers to this question.
- A. Local and global object dependencies
- B. Selection conditions and procedures
- C. Selection conditions only
- D. Local object dependencies only
正解：A、B
質問 # 39
You work with a Plan./Production Order without BOM explosion scenario.Which information is available?Note: There are 2 correct Answers to this question.
- A. In the simulation, information about the BOM and routing is displayed.
- B. In the simulation, no information about the BOM is displayed except the routing.
- C. In the sales order, no information about the BOM and routing is displayed.
- D. In the sales order, no information about the BOM is displayed except the routing.
正解：A、D
質問 # 40
What controls the material BOM item category?Note: There are 2 correct Answers to this question.
- A. A negative quantity is allowed.
- B. A work center is required.
- C. A change number is required.
- D. A material number is required.
正解：A、D
質問 # 41
You create a new characteristic with numeric values and you only set a single value assignment. You add one interval inside value tab. What does it mean for classification?
- A. The user can select one value of the interval inside classification.
- B. The user can set values which don't belong to the interval.
- C. The user can select an interval inside classification.
- D. The user can select several values out of the interval inside classification.
正解：A
質問 # 42
Which configuration process/scenario do you use for an Engineer To Order process?
- A. Planned/Production Order
- B. Sales Order (SET)
- C. Engineering Order
- D. Order BOM
正解：D
質問 # 43
What is a class node?
- A. Special classes that enable a cross-class search.
- B. Special classes that are used as an operation in the routing.
- C. Special classes that are used as nodes in class hierarchies.
- D. Special classes that are used as items in the BOM.
正解：D
質問 # 44
In a single-level configuration, you want to use a constraint so that if characteristic C1 has the value V1, then characteristic C2 is assigned the value V2.C1 and C2 are assigned to class (300)T_FCL00.What would be a correct complete constraint?
- A. RESTRICTION: (300)T_FCL00.C2 = 'V2' if (300)T_FCL00.C1 = 'V1'
- B. RESTRICTION: ?T_FCL00.C2 = 'V2' if ?T_FCL00.C1 = 'V1'
- C. RESTRICTION: ?C2 = 'V2' if ?C1 = 'V1'
- D. RESTRICTION: $self.C2 = 'V2' if $self.C1 = 'V1'
正解：A
質問 # 45
Which special feature must be taken into account for the material master of material variants for use in logistics?
- A. The material master requires a link to the configurable material at plant level.
- B. The material master requires a connection to the configurable material at client level.
- C. The material master at client level requires the indicator that it can be configured.
- D. The material master requires a link to the configurable material at sales area level.
正解：A
質問 # 46
Why do you need a material BOM header status?
- A. It controls the usage of the material BOM items inside logistic chain.
- B. It controls the usage of the material BOM by a certain user.
- C. It controls the usage of the material BOM inside logistic chain.
- D. It controls the usage of an assembly indicator inside material BOM.
正解：C
質問 # 47
Which scenarios are available with the Maintain Bill of Material app?Note: There are 2 correct Answers to this question.
- A. Attach a change order.
- B. Create a Version BOM.
- C. Display Valid From and Valid To information.
- D. Define Software Constraints.
正解：B、D
質問 # 48
What objects can be changed with a change number? Note: There are 2 correct Answers to this question.
- A. Work Centers
- B. Cost Centers
- C. Task Lists
- D. Bills of Material
正解：C、D
質問 # 49
The customer wants to see the cross-plant material status inside the object search in classification. How do you satisfy the customer's requirement?
- A. Add the cross-plant material status field to the database classification table.
- B. Create a reference characteristic.
- C. Change the screen sequence of the classification view.
- D. Create a custom data type in customizing.
正解：B
質問 # 50
What do you have to keep in mind when overwriting characteristic for a specific class?
- A. The status of this characteristic is automatically set to incomplete.
- B. This change applies only to the characteristic, when it is used in this class.
- C. The status of this characteristic is automatically set to locked.
- D. This change applies only to the characteristic, when it is used in every class.
正解：B
質問 # 51
......
学習材料は有効なC-TS411-2022効率的問題集：https://jp.fast2test.com/C-TS411-2022-premium-file.html