合格させちゃうLevel 4 Diploma in Procurement and Supply L4M7試験簡単かつ正確なPDF問題 [2025年02月20日]
L4M7認証試験問題集解答を提供しています
CIPS L4M7(CIPS Whole Life Asset Management)認定試験は、資産管理の分野で専門知識を獲得したい専門家向けに特別に設計された高度なレベルの認定です。認定試験は、世界的に認められた資格であり、生涯全体を通して資産を管理するために必要な知識とスキルを専門家に提供します。この試験では、資産識別、評価、メンテナンス、交換、処分など、さまざまなトピックをカバーしています。また、資産管理を統治する法的および規制要件の理解も含まれています。
質問 # 20
What cost factors should be considered for the maintenance and repair of manufacturing equipment?
* Direct labor cost
* Cost of utilities during the use of the equipment
* Cost of the goods being sold
* Guarantee and warranty cost
- A. 3 and 4 only
- B. 1 and 4 only
- C. 2 and 3 only
- D. 1 and 2 only
正解:B
解説:
Maintenance and repair costs include:
* Direct labor: Expenses for personnel performing maintenance tasks.
* Warranty costs: Expenses associated with warranty obligations or repairs within the warranty period.
These costs are part of whole-life asset management, which aims to accurately budget for and manage ongoing equipment expenses.
質問 # 21
Which of the following is an assumption of economic-order-quantity model?
- A. Demand, ordering costs, and carrying costs are uncertain
- B. No inventory stockouts occur
- C. The quantity ordered can vary at each reorder point
- D. The purchasing cost per unit is affected by the order quantity
正解:B
解説:
Economic order quantity (EOQ) model is the method that provides the company with an order quantity. This order quantity figure is where the record holding costs and ordering costs are mini-mized. By using this model, the companies can minimize the costs associated with the ordering and inventory holding. In 1913, Ford W.
Harris developed this formula whereas R. H. Wilson is given credit for the application and in-depth analysis on this model.
If the economic order quantity model is applied, the following assumptions should be met:
- The rate of demand is constant, and total demand is known in advance.
- The ordering cost is constant.
- The unit price of inventory is constant, i.e., no discount is applied depending on order quantity.
- Delivery time is constant.
- Replacement of defective units is instantaneous.
- There is no safety stock level, i.e., the minimum stock level is zero.
- Restocking is made by the whole batch.
Because the demand and lead time are constant, no stockout events can occur.
Reference:
LO 2, AC 2.3
質問 # 22
Which among the following are the tools for reducing acquisition costs in purchasing?
1. Procurement card
2. Automated Storage & Retrieval System
3. Porter's value chain
4. P2P system
- A. 1 and 3 only
- B. 1 and 4 only
- C. 2 and 3 only
- D. 2 and 4 only
正解:B
解説:
There are several methods to reduce the acquisition costs in procurement. L4M7 study guide lists the following methods:
- Buyer discretionary spend
- 'User buying'
- Vendor managed inventory (VMI)
- Two-bin Kanban
- Product catalogue
- e-Procurement techniques, including some systems such as ERP, procure-to-pay (P2P), e-requisition, e-tendering, etc.
- Procurement cards
Reference:
LO 3, AC 3.1
質問 # 23
XYZ Inc opens a tender to purchase new forklift trucks for their new established warehouse. In the final round, there are two suppliers remain who offer two different bids. Supplier A's bid has high initial investment. After calculating the net present value, the NPV in year five is positive. On the other hand, supplier B's bid has low purchase price, with the NPV in year five is negative. If the NPV is the sole selection criterion, XYZ Inc should select the bid which has...?
- A. Negative NPV
- B. The lowest NPV
- C. Zero NPV
- D. Positive NPV
正解:D
解説:
Net present value (NPV) is the 'today' net value that deprives from 'future' cash flow of an invest-ment or a capital purchase. Net Present Value is a helpful tool for assessing the total lifetime value of an investment.
Procurement professionals or investors can base on this value to make decision to achieve value for money.
Generally, an organisation should select the offer which has the highest NPV among their options. Preferably, the NPV of an capital investment should be positive, which means the investment eventually adds value to the business.
質問 # 24
Staff at DIY Products Inc (DPI) have been experiencing issues with the identification of stock items. The current labelling system is outdated and unreliable. DPI has therefore invested in a machine-readable approach. Each item has a unique number that is attached visibly to the packaging. This number can be deciphered by a scanner to aid identification. This approach is known as which of the following?
- A. Product tagging
- B. Bar coding
- C. Order tracking
- D. Standard certification
正解:B
質問 # 25
Which one of the following statements is true about radio frequency identification (RFID)?
- A. An active RFID tag does not require a power source
- B. RFID tags require laser scanning.
- C. Normally passive RFID tags store ID numbers
- D. A passive RFID tag does not use an antenna
正解:C
解説:
Radio frequency identification (RFID) are items which use radio technology to identify itself and its location subject to having appropriate hardware and software.
RFID tags are made of three different components: an RFID chip, which is an integrated circuit (IC), an antenna, and a substrate.
A RFID Reader is a device that uses radio-frequency waves to wirelessly transfer data between itself and a RFID tag/label in order to identify, categorize and track assets. When combined with the right RFID software, a RFID reader can identify objects quicker, more accurately, at a reduced overall cost, and at various points of the object's lifecycle.
Passive RFID systems use tags with no internal power source and instead are powered by the electromagnetic energy transmitted from an RFID reader. Passive RFID tags are used for applica-tions such as access control, file tracking, race timing, supply chain management, smart labels, and more.
Active RFID systems have three essential parts - a reader or interrogator, antenna, and a tag. Ac-tive RFID tags possess their own power source - an internal battery that enables them to have ex-tremely long read ranges as well as large memory banks.
Reference:
LO 1, AC 1.2
質問 # 26
The minimal total cost is always achieved when there is only one warehouse. Is this statement true?
- A. No, more warehouses will reduce the cost of storage
- B. Yes, because warehouse overheads are fully utilised
- C. Yes, because the operation cost for warehouse reaches minimal level
- D. No, fewer warehouse may lead to increasing transport costs
正解:D
解説:
The total cost of storage consists of two different costs:
- The cost of warehouses: each one has a different cost, and each has the cost of stock-holding and stock management included
- The transport costs: the total transport cost reduces as further warehouses mean shorter final delivery to the customers.
Depending on each situation, the optimal number of warehouses varies. Generally, more facilities will increase the cost of warehouses while reduce the transport costs and vice versa.
Reference:
LO 1, AC 1.1
質問 # 27
A brewery sells its beer in aluminum cans. It recycles the cans by using contractors to collect and mold the used cans. This is an example of...?
- A. Open-loop recycling
- B. Reuse
- C. Carbon recycling
- D. Closed-loop recycling
正解:D
解説:
There are two main processes of recycling - open loop recycling and closed loop recycling.
Open Loop Recycling
Open loop recycling is a method that delays disposal by converting manufactured goods and spent materials into both new raw materials, which can be used for a manufacturing purpose, as a fuel source for a different manufacturing process and waste products.
Typically, materials recycled through open-loop recycling will be used for purposes different from their original purpose.
This means that the input into the recycling process is converted to a new raw material, which can be used as an input into another manufacturing process.
Materials in an open loop recycling process are treated using various forms of treatment including heat, chemical reactions, or physical crushing.
Closed Loop Recycling
Closed loop recycling is a process where waste is collected, recycled and then used again to make the same product it came from. This process is restorative and regenerative by design and aims to keep materials at their highest utility and value always.
Closed loop recycling is focused on resource sustainability, which means that recycling of a material can be done indefinitely without degradation of properties. In this case, conversion of the used product back to raw material allows repeated making of the same product, which helps hazardous waste generators reduce carbon footprint and achieve corporate sustainability initiatives.
Closed-loop recycling is common in specialized industries, such as the computer and battery industries, which use expensive or complex goods that cannot easily be broken down post-consumption into constituent materials.
A prime example of a closed-loop recycling process is the recycling of aluminum cans. Aluminum can be recycled to form new cans with little material degradation or waste creation.
質問 # 28
One of the important outputs of an MRP system is the material requirement plan. This plan shows the net requirements for materials or components to make the final product. Which of the following best describes the net material requirements?
- A. Total requirements - order releases + amount on-hand
- B. Gross requirements - Inventory level - Scheduled receipt
- C. On order + Inventory on-hand
- D. Gross requirements + on-order - Inventory on-hand
正解:B
解説:
The net requirements are worked out using the following equation:
Net requirements = Total requirements - Available inventory
Where:
Total requirements = Gross requirements
Available inventory = Inventory on-hand + Units on-order
In the other words: Net requirements = Gross requirements - Inventory on-hand - Units on-order Inventory on-hand is also known as Inventory level, whereas Units on-order can be called Scheduled receipt.
質問 # 29
A warehouse manager is evaluating the use of Automated Guided Vehicles (AGVs) within a repetitive task environment. After reviewing their use and price, the manager decided to invest in several AGVs. Were they correct in doing this?
- A. Yes, as it will reduce the costs of employing labour
- B. No, as it reduces the flexibility of the warehouse operations
- C. No, as they are only suitable for use in non-repetitive task environments
- D. Yes, organisations must use high-tech solutions where possible
正解:A
質問 # 30
Which of the following refer to material used for filling the void left in the box but they have poor environmental profile?
- A. Cages
- B. Metal racking
- C. Polypropylene straps
- D. Polystyrene chips
正解:D
解説:
Void filling is the general term giving to the challenge of filling the space left in a box after the products have been packed. This means that if there is no void filling material, the product inside can move around and could be damaged. Materials to fill voids to secure contents
* Polystyrene (PS) is a synthetic aromatic hydrocarbon polymer made from the monomer known as styrene.
[5] Polystyrene can be solid or foamed. General-purpose polystyrene is clear, hard, and rather brittle. It is an inexpensive resin per unit weight. It is a rather poor barrier to oxygen and water vapour and has a relatively low melting point.[6] Polystyrene is one of the most widely used plastics, the scale of its production being several million tonnes per year.[7] Polystyrene can be naturally transparent, but can be coloured with colourants. Uses include protective packaging (such as packing peanuts and CD and DVD cases), containers, lids, bottles, trays, tum-blers, disposable cutlery[6] and in the making of models. Polystyrene is generally considered to be non-biodegradable. However, certain organisms are able to degrade it, albeit very slowly.
* Chips made of bio-degradable materials
* Absorbent and fire-resistant material
* Shredded paper, cardboard or wood-Based material
* Paper or cardboard rolls
* Bubble wrap
* Air-filled cushions
* Self expanding foam
Straps are used to group items into unit load. Polypropylene or polyester are the materials most often used.
The wider the strap, the stronger it will be. Using more than one strap and straps for length and width will create a strong place for stock.
質問 # 31
XYZ Ltd is a retailer in the US. Their customers' demand for Thanksgiving and Christmas decora-tions usually rises in the end of the year. This irregular demand results in more required storage space for finished goods during peak seasons. Which of the following are possible solutions for dealing with required additional space?
1. Maximising aisle width
2. Keeping high buffer stock throughout the year
3. Maximising flexibility in warehouse layout
4. Installing mezzanine floor
- A. 1 and 3 only
- B. 3 and 4 only
- C. 1 and 2 only
- D. 2 and 4 only
正解:B
解説:
Possible solutions to the high irregular or seasonal demand problems are listed below:
* Take advantage of the height of the warehouse
- Mezzanine floor
- High racking system (increase storage capacity but require high-reach material handling equip-ment)
* Eliminate dead stock or inventory
* Improve material flow
* Improve storage location method
* Consider using aisle space during demand peak
* Narrow aisles between racks (require narrow handling equipment)
* Carousel-type storage system
* Auto-storage and retrievals system (ASRS)
Reference:
LO 1, AC 1.1
質問 # 32
Which of the following can replace pallets as bases for unit loads but they require push pull acces-sories to retrieve or discharge unit load?
- A. Post pallets
- B. Shrink wraps
- C. Slip sheets
- D. Skids
正解:C
解説:
The system of slip sheet load handling involves the use of a thin sheet of material, the slip sheet, as a base on which items are assembled as a unit load for handling, storage, and transport. The slip sheet is used in conjunction with a pallet, if desired, at certain stages in the distribution cycle. If all lift trucks in the cycle are equipped with the proper attachment, an appropriate slip sheet is the only material handling base required.
Slip sheet requires special push pull accessories and usually use thin and wide forks.
A picture containing text Description automatically generated

Diagram Description automatically generated
Skids are generally described as single-deck pallets and do not have bottom flatted layer which makes them less bulky and cheaper than conventional pallets but also less universal in their use.
A picture containing building material Description automatically generated
Shrink wrap, also referred to as shrink film or shrink wrap, is a versatile polymer material used for the packaging of finished goods. Heat is applied to the film - by either a conveyor heat tunnel or an electric or gas heat gun - which catalyzes the film to shrink tightly around the item placed within. This process results in a clear, durable barrier of protection around the product.
Post pallets have a simple metal structure with four uprights and substantial feat to take the load. These may be free standing, but many are designed for the feet to interlock with the posts of another post pallet so that the stack can be created.
A picture containing handcart, transport Description automatically generated
質問 # 33
Which of the following best describes available inventory (also known as inventory position)?
- A. The amount of inventory on hand plus the amount of inventory on order
- B. The amount of inventory on hand in excess of expected demand
- C. The amount of inventory on order only
- D. The amount of inventory on hand
正解:A
解説:
Available inventory (or Inventory position - IP) is equal to inventory on-hand plus quantity on order minus backorder (if any) Reference:
LO 2, AC 2.3
質問 # 34
For which of the following is the 'delphi method' used?
- A. Controlling products
- B. Classifying products
- C. Forecasting demand
- D. Valuing stock
正解:C
解説:
Delphi method is a structured forecasting technique using a panel of experts and a number of rounds of questioning. Responses are shared after each round and the experts encouraged to recon-sider their own responses. It is intended to achieve a consensus view.
Reference:
LO 2, AC 2.3
質問 # 35
The Four Counties hospital in Norway is experiencing financial pressures. The procurement team is looking for the best approach to procure patient equipment that is critical and is often required at very short notice.
Which of the following techniques would allow the hospital to access the stock at short notice, but without paying for it until it is used?
- A. Discounted stocking
- B. Reference indices pricing
- C. Consignment stocking
- D. Volume-based pricing
正解:C
質問 # 36
Ranger Mobile Ltd is a emerging smartphone manufacturer. The manufacturer adopts the just-in-time method:
First, the customers make orders, then it will decide which components to be pur-chased according to the bill of materials. These components are known as which of the following?
- A. Independent forecast items
- B. Dependent demand items
- C. Capital goods
- D. Indirect items
正解:B
解説:
Dependent demand is the requirement for stock item which is directly related to and therefore de-pendent upon the rate of production (examples are: raw materials, components, energy). The com-ponents in the scenario are dependent demand items.
Independent demand is the requirement for stock item which is not directly related to, and is therefore independent of rate of production.
質問 # 37
......
検証済みで更新されたL4M7問題集と解答で100%一発合格保証の問題集:https://drive.google.com/open?id=19wGd2v8im26WCX5SmChm1lUxSFFvOUWO
更新されたL4M7試験練習テスト問題:https://jp.fast2test.com/L4M7-premium-file.html