リアルなNSE7_OTS-6.4は100%カバー試験問題をゲット [2023年11月]
問題集まとめ概要はNSE7_OTS-6.4試験問題集はここ
質問 # 19
What can be assigned using network access control policies?
- A. Logical networks
- B. Layer 3 polling intervals
- C. Profiling rules
- D. FortiNAC device polling methods
正解：C
質問 # 20
Refer to the exhibit.
You are navigating through FortiSIEM in an OT network.
How do you view information presented in the exhibit and what does the FortiGate device security status tell you?
- A. In the business service dashboard and there are one or more high-severity security incidents for the FortiGate device.
- B. In the PCI logging dashboard and there are one or more high-severity security incidents for the FortiGate device.
- C. In the summary dashboard and there are one or more high-severity security incidents for the FortiGate device.
- D. In the widget dashboard and there are one or more high-severity incidents for the FortiGate device.
正解：C
質問 # 21
Refer to the exhibit.
An OT administrator ran a report to identify device inventory in an OT network.
Based on the report results, which report was run?
- A. A FortiAnalyzer device report
- B. A FortiSIEM incident report
- C. A FortiSIEM analytics report
- D. A FortiSIEM CMDB report
正解：D
質問 # 22
Refer to the exhibit.
You need to configure VPN user access for supervisors at the breach and HQ sites using the same soft FortiToken. Each site has a FortiGate VPN gateway.
What must you do to achieve this objective?
- A. You must register the same FortiToken on more than one FortiGate.
- B. You must use the user self-registration server.
- C. You must use a FortiAuthenticator.
- D. You must use a third-party RADIUS OTP server.
正解：C
質問 # 23
Refer to the exhibit.
An OT administrator ran a report to identify device inventory in an OT network.
Based on the report results, which report was run?
- A. A FortiAnalyzer device report
- B. A FortiSIEM incident report
- C. A FortiSIEM analytics report
- D. A FortiSIEM CMDB report
正解：D
質問 # 24
Which three common breach points can be found in a typical OT environment? (Choose three.)
- A. Black hat
- B. RTU exploits
- C. Global hat
- D. VLAN exploits
- E. Hard hat
正解：A、B、E
質問 # 25
In a wireless network integration, how does FortiNAC obtain connecting MAC address information?
- A. End station traffic monitoring
- B. MAC notification traps
- C. RADIUS
- D. Link traps
正解：C
解説：
FortiNAC can integrate with RADIUS servers to obtain MAC address information for wireless clients that authenticate through the RADIUS server.
Reference:
Fortinet NSE 7 - OT Security 6.4 Study Guide, Chapter 4: OT Security Devices, page 4-28.
質問 # 26
What triggers Layer 2 polling of infrastructure devices connected in the network?
- A. A matched profiling rule
- B. A failed Layer 3 poll
- C. A matched security policy
- D. A linkup or linkdown trap
正解：D
質問 # 27
What two advantages does FortiNAC provide in the OT network? (Choose two.)
- A. It can be used for network micro-segmentation.
- B. It can be used for IoT device detection.
- C. It can be used for device profiling.
- D. It can be used for industrial intrusion detection and prevention.
正解：B、C
解説：
Typically, in a microsegmented network, NGFWs are used in conjunction with VLANs to implement security policies and to inspect and filter network communications. Fortinet FortiSwitch and FortiGate NGFW offer an integrated approach to microsegmentation.
質問 # 28
An OT network architect needs to secure control area zones with a single network access policy to provision devices to any number of different networks.
On which device can this be accomplished?
- A. FortiGate
- B. FortiSwitch
- C. FortiEDR
- D. FortiNAC
正解：D
質問 # 29
An OT network architect must deploy a solution to protect fuel pumps in an industrial remote network. All the fuel pumps must be closely monitored from the corporate network for any temperature fluctuations.
How can the OT network architect achieve this goal?
- A. Configure a fuel server on the corporate network, and deploy a FortiSIEM with a single pattern temperature performance rule on the remote network.
- B. Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature security rule on the corporate network.
- C. Configure both fuel server and FortiSIEM with a single-pattern temperature performance rule on the corporate network.
- D. Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature performance rule on the corporate network.
正解：A
質問 # 30
What are two benefits of a Nozomi integration with FortiNAC? (Choose two.)
- A. Enhanced point of connection details
- B. Importation and classification of hosts
- C. Direct VLAN assignment
- D. Adapter consolidation for multi-adapter hosts
正解：A、C
質問 # 31
An OT network administrator is trying to implement active authentication.
Which two methods should the administrator use to achieve this? (Choose two.)
- A. Two-factor authentication on FortiAuthenticator
- B. Role-based authentication on FortiNAC
- C. Local authentication on FortiGate
- D. FSSO authentication on FortiGate
正解：A、B
質問 # 32
What can be assigned using network access control policies?
- A. Profiling rules
- B. Logical networks
- C. Layer 3 polling intervals
- D. FortiNAC device polling methods
正解：B
質問 # 33
An OT administrator configured and ran a default application risk and control report in FortiAnalyzer to learn more about the key application crossing the network. However, the report output is empty despite the fact that some related real-time and historical logs are visible in the FortiAnalyzer.
What are two possible reasons why the report output was empty? (Choose two.)
- A. The administrator selected the wrong devices in the Devices section.
- B. The administrator selected the wrong logs to be indexed in FortiAnalyzer.
- C. The administrator selected the wrong time period for the report.
- D. The administrator selected the wrong hcache table for the report.
正解：C、D
質問 # 34
Refer to the exhibit.
You are navigating through FortiSIEM in an OT network.
How do you view information presented in the exhibit and what does the FortiGate device security status tell you?
- A. In the business service dashboard and there are one or more high-severity security incidents for the FortiGate device.
- B. In the PCI logging dashboard and there are one or more high-severity security incidents for the FortiGate device.
- C. In the summary dashboard and there are one or more high-severity security incidents for the FortiGate device.
- D. In the widget dashboard and there are one or more high-severity incidents for the FortiGate device.
正解：C
質問 # 35
Which three methods of communication are used by FortiNAC to gather visibility information? (Choose three.)
- A. SNMP
- B. TACACS
- C. API
- D. ICMP
- E. RADIUS
正解：A、C、E
質問 # 36
Refer to the exhibit and analyze the output.
Which statement about the output is true?
- A. This is a sample of FortiGate interface statistics.
- B. This is a sample of a FortiAnalyzer system interface event log.
- C. This is a sample of an SNMP temperature control event log.
- D. This is a sample of a PAM event type.
正解：B
質問 # 37
An OT network architect must deploy a solution to protect fuel pumps in an industrial remote network. All the fuel pumps must be closely monitored from the corporate network for any temperature fluctuations.
How can the OT network architect achieve this goal?
- A. Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature performance rule on the corporate network.
- B. Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature security rule on the corporate network.
- C. Configure both fuel server and FortiSIEM with a single-pattern temperature performance rule on the corporate network.
- D. Configure a fuel server on the corporate network, and deploy a FortiSIEM with a single pattern temperature performance rule on the remote network.
正解：A
質問 # 38
You are investigating a series of incidents that occurred in the OT network over past 24 hours in FortiSIEM.
Which three FortiSIEM options can you use to investigate these incidents? (Choose three.)
- A. Risk
- B. Overview
- C. IPS
- D. Security
- E. List
正解：A、B、E
質問 # 39
An OT supervisor has configured LDAP and FSSO for the authentication. The goal is that all the users be authenticated against passive authentication first and, if passive authentication is not successful, then users should be challenged with active authentication.
What should the OT supervisor do to achieve this on FortiGate?
- A. Enable two-factor authentication with FSSO.
- B. Configure a firewall policy with LDAP users and place it on the top of list of firewall policies.
- C. Under config user settings configure set auth-on-demand implicit.
- D. Configure a firewall policy with FSSO users and place it on the top of list of firewall policies.
正解：C
質問 # 40
Refer to the exhibit.
You need to configure VPN user access for supervisors at the breach and HQ sites using the same soft FortiToken. Each site has a FortiGate VPN gateway.
What must you do to achieve this objective?
- A. You must register the same FortiToken on more than one FortiGate.
- B. You must use the user self-registration server.
- C. You must use a FortiAuthenticator.
- D. You must use a third-party RADIUS OTP server.
正解：C
質問 # 41
What two advantages does FortiNAC provide in the OT network? (Choose two.)
- A. It can be used for IoT device detection.
- B. It can be used for network micro-segmentation.
- C. It can be used for device profiling.
- D. It can be used for industrial intrusion detection and prevention.
正解：B、C
質問 # 42
......
Fortinet NSE7_OTS-6.4は、オペレーショナル・テクノロジー（OT）セキュリティの分野におけるネットワークセキュリティ専門家のスキルと知識を検証する認定試験です。この試験は、産業制御システム（ICS）や監視制御およびデータ収集（SCADA）システムのセキュリティを担当する個人を対象としています。Fortinet NSE7_OTS-6.4試験は、Fortinetのネットワークセキュリティ専門家（NSE）プログラムの一部であり、Fortinetの製品やソリューションに関する詳細な知識を提供する包括的なトレーニングと認定プログラムです。
Fortinet NSE7_OTS-6.4認定を達成することは、専門家がOTネットワークを確保し、サイバーの脅威から保護するために必要な知識とスキルを持っていることを示しています。この認定は、世界中の組織によって認識されており、サイバーセキュリティ業界で高く評価されています。この認定を達成する専門家は、OTセキュリティアナリスト、ネットワーク管理者、セキュリティコンサルタントなどの役割を引き受ける能力が整っています。
Fortinet NSE7_OTS-6.4試験は、ネットワークセキュリティの専門家、ITマネージャー、および産業制御システムおよびその他のOTインフラストラクチャの保護に関与する他の専門家に最適です。この試験は、OTセキュリティの分野で知識とスキルを向上させようとしている個人にも適しています。 Fortinet NSE7_OTS-6.4試験は、Fortinet Solutionsを使用してOTシステムを保護する候補者の専門知識を実証するグローバルに認められた認定です。さらに、この認定は、雇用市場の専門家に競争上の優位性を提供し、新しいキャリアの機会を開きます。
認定トレーニングはNSE7_OTS-6.4試験問題集テストエンジン：https://jp.fast2test.com/NSE7_OTS-6.4-premium-file.html
NSE7_OTS-6.4トレーニングと認定最新のNSE 7 Network Security Architect問題をゲットせよ：https://drive.google.com/open?id=1cprfWmZ0Y1r0EYXrzBmfBLRcoe4vudBh