[2023年12月29日] 最速準備で試験合格！NSE7_OTS-6.4問題の事前予備 [Q21-Q38]

[2023年12月29日] 最速準備で試験合格！NSE7_OTS-6.4問題の事前予備

NSE7_OTS-6.4のPDF問題集リアル2023最近更新された問題

質問 # 21
Refer to the exhibit.

You need to configure VPN user access for supervisors at the breach and HQ sites using the same soft FortiToken. Each site has a FortiGate VPN gateway.
What must you do to achieve this objective?

A. You must use a FortiAuthenticator.
B. You must use the user self-registration server.
C. You must use a third-party RADIUS OTP server.
D. You must register the same FortiToken on more than one FortiGate.

正解：A

質問 # 22
As an OT administrator, it is important to understand how industrial protocols work in an OT network.
Which communication method is used by the Modbus protocol?

A. It uses OSI Layer 2 and the secondary device sends data based on request from primary device.
B. It uses OSI Layer 2 and both the primary/secondary devices send data based on a matching token ring.
C. It uses OSI Layer 2 and the primary device sends data based on request from secondary device.
D. It uses OSI Layer 2 and both the primary/secondary devices always send data during the communication.

正解：A

質問 # 23
When you create a user or host profile, which three criteria can you use? (Choose three.)

A. Location
B. An existing access control policy
C. Host or user attributes
D. Host or user group memberships
E. Administrative group membership

正解：A、C、D

解説：
https://docs.fortinet.com/document/fortinac/9.2.0/administration-guide/15797/user-host-profiles

質問 # 24
What two advantages does FortiNAC provide in the OT network? (Choose two.)

A. It can be used for network micro-segmentation.
B. It can be used for device profiling.
C. It can be used for IoT device detection.
D. It can be used for industrial intrusion detection and prevention.

正解：A、B

質問 # 25
An OT network architect must deploy a solution to protect fuel pumps in an industrial remote network. All the fuel pumps must be closely monitored from the corporate network for any temperature fluctuations.
How can the OT network architect achieve this goal?

A. Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature performance rule on the corporate network.
B. Configure a fuel server on the corporate network, and deploy a FortiSIEM with a single pattern temperature performance rule on the remote network.
C. Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature security rule on the corporate network.
D. Configure both fuel server and FortiSIEM with a single-pattern temperature performance rule on the corporate network.

正解：A

質問 # 26
An OT administrator is defining an incident notification policy using FortiSIEM and would like to configure the system with a notification policy. If an incident occurs, the administrator would like to be able to intervene and block an IP address or disable a user in Active Directory from FortiSIEM.
Which step must the administrator take to achieve this task?

A. Deploy a mitigation script on Active Directory and create a notification policy on FortiSIEM.
B. Define a script/remediation on FortiManager and enable a notification rule on FortiSIEM.
C. Create a notification policy and define a script/remediation on FortiSIEM.
D. Configure a fabric connector with a notification policy on FortiSIEM to connect with FortiGate.

正解：B

質問 # 27
What are two benefits of a Nozomi integration with FortiNAC? (Choose two.)

A. Importation and classification of hosts
B. Direct VLAN assignment
C. Adapter consolidation for multi-adapter hosts
D. Enhanced point of connection details

正解：A、D

解説：
The two benefits of a Nozomi integration with FortiNAC are enhanced point of connection details and importation and classification of hosts. Enhanced point of connection details allows for the identification and separation of traffic from multiple points of connection, such as Wi-Fi, wired, cellular, and VPN. Importation and classification of hosts allows for the automated importing and classification of host and device information into FortiNAC. This allows for better visibility and control of the network.

質問 # 28
What are two benefits of a Nozomi integration with FortiNAC? (Choose two.)

A. Direct VLAN assignment
B. Importation and classification of hosts
C. Adapter consolidation for multi-adapter hosts
D. Enhanced point of connection details

正解：A、D

質問 # 29
Which three common breach points can be found in a typical OT environment? (Choose three.)

A. Global hat
B. Black hat
C. RTU exploits
D. VLAN exploits
E. Hard hat

正解：B、C、E

質問 # 30
Refer to the exhibit.

Based on the topology designed by the OT architect, which two statements about implementing OT security are true? (Choose two.)

A. FortiGate-3 and FortiGate-4 devices must be in a transparent mode.
B. IT and OT networks are separated by segmentation.
C. Firewall policies should be configured on FortiGate-3 and FortiGate-4 with industrial protocol sensors.
D. Micro-segmentation can be achieved only by replacing FortiGate-3 and FortiGate-4 with a pair of FortiSwitch devices.

正解：B、C

質問 # 31
What can be assigned using network access control policies?

A. Layer 3 polling intervals
B. Profiling rules
C. Logical networks
D. FortiNAC device polling methods

正解：C

質問 # 32
Refer to the exhibit.

You need to configure VPN user access for supervisors at the breach and HQ sites using the same soft FortiToken. Each site has a FortiGate VPN gateway.
What must you do to achieve this objective?

A. You must use a FortiAuthenticator.
B. You must use the user self-registration server.
C. You must use a third-party RADIUS OTP server.
D. You must register the same FortiToken on more than one FortiGate.

正解：A

質問 # 33
Refer to the exhibit.

An OT administrator ran a report to identify device inventory in an OT network.
Based on the report results, which report was run?

A. A FortiAnalyzer device report
B. A FortiSIEM analytics report
C. A FortiSIEM incident report
D. A FortiSIEM CMDB report

正解：D

質問 # 34
Refer to the exhibit.

You are navigating through FortiSIEM in an OT network.
How do you view information presented in the exhibit and what does the FortiGate device security status tell you?

A. In the PCI logging dashboard and there are one or more high-severity security incidents for the FortiGate device.
B. In the widget dashboard and there are one or more high-severity incidents for the FortiGate device.
C. In the business service dashboard and there are one or more high-severity security incidents for the FortiGate device.
D. In the summary dashboard and there are one or more high-severity security incidents for the FortiGate device.

正解：D

質問 # 35
What can be assigned using network access control policies?

A. Layer 3 polling intervals
B. Profiling rules
C. Logical networks
D. FortiNAC device polling methods

正解：B

質問 # 36
Refer to the exhibit.

Which statement about the interfaces shown in the exhibit is true?

A. port2, port2-vlan10, and port2-vlan1 are part of the software switch interface.
B. The VLAN ID of port1-vlan1 can be changed to the VLAN ID 10.
C. port1-vlan10 and port2-vlan10 are part of the same broadcast domain
D. port1, port1-vlan10, and port1-vlan1 are in different broadcast domains

正解：D

質問 # 37
Refer to the exhibit

In the topology shown in the exhibit, both PLCs can communicate directly with each other, without going through the firewall.
Which statement about the topology is true?

A. This integration solution expands VLAN capabilities from Layer 2 to Layer 3.
B. There is no micro-segmentation in this topology.
C. PLCs use IEEE802.1Q protocol to communicate each other.
D. An administrator can create firewall policies in the switch to secure between PLCs.

正解：B

質問 # 38
......

NSE7_OTS-6.4問題集と練習テスト（37試験問題)：https://jp.fast2test.com/NSE7_OTS-6.4-premium-file.html

リリースFortinet NSE7_OTS-6.4更新された問題PDF：https://drive.google.com/open?id=1cprfWmZ0Y1r0EYXrzBmfBLRcoe4vudBh