HPE7-A04ブレーン問題集リアル試験最新問題2025年03月29日には100問題 [Q44-Q69]

Share

HPE7-A04ブレーン問題集リアル試験最新問題2025年03月29日には100問題

最新HPE7-A04のPDF問題集リアル無料テスト本日更新です


HP HPE7-A04 認定試験の出題範囲:

トピック出題範囲
トピック 1
  • ソリューションの準備と提示: 最後のセクションでは、ソリューション アーキテクトが提案されたソリューションを準備し、関係者に提供するスキルを評価します。詳細な設計ドキュメントの作成、ソリューションの効果的な提示、必要な変更の確認などが含まれます。
トピック 2
  • 要件の検出: このセクションでは、主要な要件を収集するソリューション アーキテクトの能力を評価します。利害関係者の特定、プロジェクトの目的の理解、現在の環境の評価の重要性を強調します。
トピック 3
  • 要件の分析: このセクションでは、収集したデータを分析および解釈する能力が試験で測定されます。対象者は、要件を技術的なソリューションに変換し、関連する仮定を文書化し、制約を評価することに重点を置いています。
トピック 4
  • ソリューションの設計: このセクションでは、効果的な技術ソリューションを設計する候補者の能力をテストします。初期設計の開発、適切な製品の選択、ネットワーク セグメントとプロトコルの定義が含まれます。

 

質問 # 44
You are designing an overlay solution for two Data Centers based on the Aruba CX platform. Each Data Center has two rooms and each room is its own fabric. What is the underlay routing protocol run within each room?

  • A. OSPF
  • B. IS-IS
  • C. eBGP
  • D. iBGP

正解:A


質問 # 45
In L3 spine and leaf design

  • A. Since all Spine switches are connected to each other, EVPN is needed in this design
  • B. You don't need to use spanning tree for loop prevention
  • C. You need to use TRILL to prevent loops
  • D. Spanning Tree is always needed since Spine and Leaf is only there to improve performance

正解:B


質問 # 46
In preparation for the deployment, what statement is correct from the below?

  • A. It is not best practice to build the new network in parallel to the existing network
  • B. If you have spent good time on your design, there is no need to have any rollback plan
  • C. It is best if you migrate Layer 2 functionality (e.g., VLAN tagging on uplinks) and Layer 3 function (e.
    g., default gateways) simultaneously
  • D. Migrate Layer 2 functionality (e.g., VLAN tagging on uplinks) then cut over to Layer 3 function (e.g., default gateways)

正解:D


質問 # 47
What is recommended for the routing protocol setup on leaf VSX pairs?

  • A. Have the VSX members connect to each spine switch on an L3 VSX LAG and become neighbors with each other and the spine on its subnet
  • B. Do not configure the routing protocol to run directly between the leaf VSX members
  • C. Configure the leaf VSX members to establish neighbor relationships with each other over one of the server subnets
  • D. Add a dedicated VLAN to the VSX ISL, assign it a /31 subnet, and run the routing protocol on it

正解:D


質問 # 48
What are two advantages of Campus Attached DC?

  • A. Highly Scalable
  • B. Reduced failure domain
  • C. Simple and easy to manage
  • D. Low latency for workloads between DC and Campus

正解:C、D


質問 # 49
In ToR or Middle of Rack switch-Ports oriented to server ports:

  • A. The airflow of the switches should be front to back (FB)
  • B. It is recommended to use fanless Data Center Switches to overcome the heat generated
  • C. It does not matter which direction is the airflow
  • D. The airflow of the switches should be back to front (BF)

正解:D


質問 # 50
What is one difference between a QSFP28 LC BiDi transceiver and a QSFP28 MPO SR4 transceiver?

  • A. The BiDi transceiver requires single-mode fiber, while the SR4 transceiver supports multi-mode
  • B. The BiDi transceiver supports lower bandwidth than the SR4 transceiver
  • C. The BiDi transceiver supports splitting the bandwidth into multiple lower bandwidth links
  • D. The BiDi transceiver uses fewer fiber strands than the SR4 transceiver

正解:D


質問 # 51
Choose the most suitable technology for the DCI (Data Center Interconnect) when Data Centers are geographically not in the same building:

  • A. ERPS + VRRP
  • B. VSF
  • C. STP
  • D. VSX

正解:A


質問 # 52
In which situation do you need to select switches with a back-front (BF) airflow?

  • A. The switches are middle of the rack switches with their ports facing the cold aisle
  • B. The switches are core switches in a dedicated rack with their ports facing the cold aisle
  • C. The switches are ToR switches which will have the port side facing the opposite way as server ports
  • D. The switches are ToR switches which will have the port side facing the same way as server ports

正解:D


質問 # 53
What materials do you need to include for the solution proposal? (Choose all that apply)

  • A. Data sheets for switches included in the solution
  • B. RFP response (for projects with formal RFPs)
  • C. Illustrations such as block diagrams
  • D. Quote
  • E. BOM (Bill Of Materials)

正解:B、C、D、E


質問 # 54
BGP EVPN type 2 routes advertise MAC addresses of clients connected to VNIs on this VTEP. Other VTEPs use this information to populate the MAC address tables for the VLAN associated with the VNI.
VXLAN does not rely on MAC forwarding to establish connectivity

  • A. The forwarding interface for the MAC address is the tunnel to the next hop VTEP
  • B. The forwarding interface for the MAC address is the local interfaces

正解:A


質問 # 55
In one of the spine and leaf designs, VMware vSphere is used including VMware NSX. OSPF is used for routing protocol across the spine and leaf topology. What do you need to consider in this design? (Select three)

  • A. Adding an anycast loopback interface on each VSX pair
  • B. Enabling OSPF in passive interface mode on the NSX transport VLAN
  • C. Using an IP MTU of 9198 on leaf-to-spine links
  • D. Using a L2 MTU of 9198 on leaf-to-spine links

正解:B、C、D


質問 # 56
You created a formal proposal and quote for a customer's data center network refresh. What is some other support information that you should include? (Select two)

  • A. HPE Aruba networking recommends including a block diagram with proposals
  • B. No need to include any of these as the proposal is not the place to educate the customer on them
  • C. A list of IP addresses that you plan to configure on the switches
  • D. A list of VLANs that you plan to configure on the switches

正解:A、D


質問 # 57
In a multi-AS underlay design

  • A. You must use eBGP for underlay routing within a leaf and spine topology
  • B. This is a wrong design for routing protocol for the underlay
  • C. You must use iBGP for underlay routing within a leaf and spine topology
  • D. Either eBGP or iBGP for underlay routing within a leaf and spine topology will work

正解:A


質問 # 58
You have VSX Pairs of CX 10000 48-Port 25G SFP28 Switches (Front/Port to Back/Power airflow) with 2 DACs for ISL. What is the maximum interface speed for each DAC connection?

  • A. 100G DAC
  • B. 0
  • C. 1
  • D. 2

正解:A


質問 # 59
CX Switches come with trusted platform modules (TPM). What is the function of TPM?

  • A. TPM prevents customers from loading certificates signed by the CA of their choice to the switches
  • B. TPM stores a certificate signed by an HPE Aruba Networking Certification Authority (CA).
  • C. TPM is just a convenient name to allow users to connect to the switch securely
  • D. TPM stores a certificate signed by GeoTrust Certification Authority (CA).

正解:B


質問 # 60
What is the maximum distance supported by Active Optical Cables (AOC)?

  • A. 15 meters
  • B. 50 meters
  • C. 7 meters
  • D. 30 meters

正解:B


質問 # 61
You have a customer who wants 3:1 oversubscription and has a CX switch with 24 ports, and each port operates at 25 Gbps edge ports. What is the expected uplink speed?

  • A. 400 Gbps
  • B. 200 Gbps
  • C. 250 Gbps
  • D. 100 Gbps

正解:B


質問 # 62
What is the transit VLAN that runs between VSX members?

  • A. Must be assigned identical IP address on both of the switches
  • B. It is used as a keepAlive mechanism
  • C. Must not be assigned IP addresses on any switch.
  • D. It is a routed VLAN allowed in the ISL to ensure that the two switches within a VSX pair can learn routes from one another, in potential failover situations

正解:D


質問 # 63
You are designing an overlay solution for two Data Centers based on the Aruba CX platform. Each Data Center has two rooms and each room is its own fabric. What is used for EVPN advertisements between data center rooms?

  • A. eBGP
  • B. Not supported design
  • C. Static Routing
  • D. iBGP

正解:A


質問 # 64
You are recommending HPE Aruba CX switches to a service provider for a Metro Ethernet solution. Which technology is the customer likely to require to allow each customer to stretch multiple VLANs across the Metro Ethernet line?

  • A. RDMA over Converged Ethernet (RoCE)
  • B. VMware NSX integration
  • C. Data Center Bridging (DCB)
  • D. QinQ

正解:D


質問 # 65
In a multi-AS underlay design

  • A. All spine switches are in the same AS while each leaf (VSX pair if used) are in their own AS
  • B. Every spine and every leaf is in their own AS
  • C. Every spine is in their own AS while all leaf switches in one AS
  • D. All spine and leaf switches are in one AS and the border leaf is in separate AS

正解:A


質問 # 66
What Fiber Optic standard supports up to 400 Gbps

  • A. QSFP+
  • B. QSFP-DD
  • C. No standard supports that bandwidth
  • D. QSFP28

正解:B


質問 # 67
Aruba CX 6200 are the only switches that support VSF and VSX stacking

  • A. True
  • B. False

正解:B


質問 # 68
PVLAN (Private VLAN) defines three types of VLANs under the same SVI

  • A. Secondary VLAN, Isolated VLAN and Provider VLAN
  • B. Primary VLAN, Isolated VLAN and Customer VLAN
  • C. Primary VLAN, Isolated VLAN and Community VLAN
  • D. Provider VLAN Service VLAN and QinQ VLAN

正解:C


質問 # 69
......

HPE7-A04問題集には100%厳密検証された問題と解答で合格保証もしくは全額返金:https://jp.fast2test.com/HPE7-A04-premium-file.html


弊社を連絡する

我々は12時間以内ですべてのお問い合わせを答えます。

我々の働いている時間: ( GMT 0:00-15:00 )
月曜日から土曜日まで

サポート: 現在連絡 

English Deutsch 繁体中文 한국어