[2026年06月]更新のNCP-CI-AWS問題集で時間限定！無料アクセスせよ！
NCP-CI-AWS問題集で2026年最新のNutanix NCP-CI-AWS試験問題
質問 # 23
A company needs to create virtual interfaces directly to public AWS S3 services. The company also wants to bypass any internet service providers in the network path.
Which method will best satisfy this requirement?
- A. Bastion Host
- B. SSH
- C. Direct Connect
- D. VPN
正解：C
解説：
AWS Direct Connect allows companies to create private, dedicated connections between their data centers and AWS. This bypasses the internet and provides a more reliable and faster network connection directly to AWS services, including S3.
Reference:
AWS Direct Connect Documentation
AWS S3 Access over Direct Connect
質問 # 24
Administrator has recently deployed an NC2 cluster on AWS in the North Virginia region in availability zone us-east-id. The consuming IPS from a 10.78.2.0/24 range.
The AWS VPC has two available CIDR ranges:
10.78.0.0/16
10.19.101.0/24
The following subnet have been configured in the NC2 AWS VPC:
Which two subnet will show up in the Network configuration of the Prism Element Settings page? (Choose two.)
- A. DR01
- B. VDI
- C. DR02
- D. L2stretch
正解：A、D
解説：
For the NC2 cluster deployed in the North Virginia region (us-east-id), consuming IPs from the 10.78.2.0/24 range, the subnets configured within the same CIDR range of 10.78.0.0/16 will be recognized.
The subnet DR01 (10.78.2.0/24) is directly within the range of the deployed cluster.
The subnet L2stretch (10.19.101.0/24) is also configured in the NC2 AWS VPC, although not in the immediate range of the cluster, it may show up due to broader network configurations for stretched L2 operations.
Subnets VDI (10.78.130.0/22) and DR02 (10.79.120.0/24), although part of the same VPC, are not directly within the immediate CIDR range or may not be recognized in this specific configuration scenario.
Reference:
Refer to the Nutanix documentation on NC2 AWS VPC subnet configurations and Prism Element settings for detailed guidelines on network visibility and configuration.
質問 # 25
An organization plans to use the Cluster Protect feature to protect the cluster data.
Which license will satisfy this requirement?
- A. AOS Pro or NCI Pro
- B. AOS Pro or AOS Ultimate
- C. AOS Ultimate or NCI Ultimate
- D. NCI Pro or AOS Ultimate
正解：C
解説：
The Cluster Protect feature, which provides data protection and disaster recovery capabilities for Nutanix clusters, requires either the AOS Ultimate or NCI Ultimate license. These licenses include the necessary features to leverage Cluster Protect for ensuring data resilience and recovery.
Reference:
Nutanix Documentation - Cluster Protection Features
Nutanix AOS 6.7 New Features
質問 # 26
Which service enables the monitoring of key metrics on various AWS services, inducing EC2, EBS, and VPC for an NC2 cluster deployments?
- A. Amazon CloudWatch
- B. AWS CloudFormation
- C. Amazon inspector
- D. AWS CloudTrail
正解：A
解説：
Amazon CloudWatch is the service that enables the monitoring of key metrics on various AWS services, including EC2, EBS, and VPC, for NC2 cluster deployments.
Amazon CloudWatch:
Amazon CloudWatch provides monitoring for AWS cloud resources and applications. It collects and tracks metrics, collects and monitors log files, and sets alarms.
Specifically, for NC2 deployments, CloudWatch can be used to monitor key metrics such as CPU utilization, disk I/O, network I/O for EC2 instances, EBS volume performance, and VPC network traffic.
Features:
Metrics Monitoring: Collects and visualizes operational data in the form of metrics, including utilization, performance, and health.
Logs Monitoring: Collects log data, monitors it in real-time, and triggers alarms based on predefined thresholds.
Alarms: Notifies when operational performance thresholds are breached.
Integration with NC2:
By setting up CloudWatch, administrators can ensure they have visibility into the performance and health of their Nutanix clusters on AWS, aiding in proactive management and troubleshooting.
Reference:
Amazon CloudWatch Documentation
Nutanix Cloud Clusters on AWS Administration Guide
AWS Monitoring Best Practices
質問 # 27
An organization plans to use the Cluster Protect feature to protect the cluster data.
Which license will satisfy this requirement?
- A. AOS Pro or NCI Pro
- B. AOS Pro or AOS Ultimate
- C. AOS Ultimate or NCI Ultimate
- D. NCI Pro or AOS Ultimate
正解：C
質問 # 28
Regarding a cloud cluster, which two upgrades can be performed using LCM? (Choose two.)
- A. NCC
- B. NBA
- C. BIOS
- D. AHV
正解：C、D
解説：
AHV (Answer A):
AHV (Acropolis Hypervisor) can be upgraded using Lifecycle Manager (LCM). LCM simplifies the upgrade process and ensures that all components are updated in a coordinated manner.
BIOS (Answer C):
BIOS upgrades can also be performed using LCM. This helps in maintaining hardware compatibility and performance by ensuring that the latest firmware is installed.
Reference:
Nutanix Lifecycle Manager (LCM) Documentation
Nutanix AHV Upgrade Guide
Nutanix BIOS Upgrade Documentation
質問 # 29
An administrator has been tasked with performing a test migrating from an NC2 environment to a Nutanix on-premises environment.
Where should the administrator perform this task?
- A. Nutanix Cloud Services Portal
- B. NC2 Prism Element
- C. On-premises Prism Central
- D. NC2 Prism Central
正解：D
解説：
When performing a migration from an NC2 environment to a Nutanix on-premises environment, the task should be performed using the NC2 Prism Central. This is because NC2 Prism Central provides a centralized management interface that allows administrators to manage and migrate workloads between cloud and on-premises environments seamlessly.
Reference:
Nutanix Cloud Clusters (NC2) Documentation
Nutanix Community Guide
質問 # 30
preparing the landing zone networking resources for a Nutanix cluster on AWS. The administrator has created a VPC with two private subnets: one for cluster management and one for user VMs.
What additional subnet must the administrator create?
- A. Public subnet for S3 access
- B. Private subnet for Prism Central
- C. Private subnet for VPN gateway
- D. Public subnet for Internet access
正解：D
解説：
When setting up a landing zone for Nutanix clusters on AWS, having only private subnets for cluster management and user VMs is not sufficient for full cluster functionality. Nutanix clusters often need to communicate with the internet for updates, patches, and other cloud services.
VPC Configuration:
The VPC already has two private subnets (one for cluster management and one for user VMs).
Additional Requirements:
To access public services like S3 or for the cluster nodes to reach Nutanix services for updates, a public subnet is essential.
Why Public Subnet for Internet Access?:
A public subnet allows resources within it to communicate directly with the internet, which is necessary for accessing Nutanix's update servers, applying patches, and other maintenance tasks.
This subnet typically includes an internet gateway, enabling instances in the public subnet to receive and send traffic directly to the internet.
Reference:
Nutanix Cloud Clusters on AWS Administration Guide
AWS Networking Best Practices
Nutanix Networking and Subnet Configuration Guidelines
質問 # 31
An administrator has deployed an NC2 cluster in AWS.
The following configuration decisions were made:
Created a new VPC from the NC2 console as part of the deployment
Selected the Public option for prism access policy
Host type selected was i13en,metal
The administrator now has a goal of provision public internet access to a user VM (UVM),web-1, on the Nutanix cluster. The admin can access Prism Element via the public DNS of the Auto-created load balancer.
The administrator tries to create another network load balancer for the web server access. After creating the load balancer and registering web-1's IP address as a target, the administrator finds that the health check for the VM target is failing and the DNS returns as NOT Found message in the browser.
Why is the issue happening?
- A. The administrator needs to provision an application load balancer instead of a network load balancer to allow Internet traffic to access the UVM subnet.
- B. The administrator has not modified the inbound rules under the UVM security group to a/low the network load balancer to access the UVM subnet.
- C. The administrator has not assigned a public IP to web-1.
- D. The load balancer is still in a Provisioning state.
正解：C
解説：
For a VM to be accessible over the internet through a load balancer, the VM itself must have a public IP address.
In this case, the health check for the VM target is failing and the DNS returns a "NOT Found" message because web-1 does not have a public IP assigned.
Without a public IP, the load balancer cannot route traffic to web-1 from the internet.
Assigning a public IP to web-1 ensures that the VM can be accessed via the load balancer, resolving the connectivity issue.
Reference:
Refer to the AWS documentation on network load balancers and public IP assignments, and Nutanix documentation on VM network configurations.
質問 # 32
An administrator is attempting to deploy an NC2 cluster.
The cluster configuration is as follows:
* Name - Cluster-1
* Nodes of type i4i.metal
* Replication Factor 2
* Existing VPC resources
* VPC - 10.0.0.0/16
* Subnets:
* Bare metal hosts: 10.0.1.0/24
* User VMs:10.0.2.0/24
* Public: 10.0.3.0/24
During the deployment process, the administrator notices the following alert:
What should the administrator do to ensure the cluster deployment does not fail?
- A. Modify the administrator's RBAC permissions in the NC2 console.
- B. Create a new VPC and modify the cluster configuration to use the new VPC.
- C. Ensure an outbound Internet connection exists from 10.0.1.0/24.
- D. Check AWS VPC and subnet quotas for the cloud account.
正解：C
解説：
The alert indicates a potential issue with the VPC/Subnet settings, preventing the cluster nodes from contacting Nutanix services.
To resolve this, the administrator needs to ensure that the subnet 10.0.1.0/24, which is assigned for Bare metal hosts, has an outbound Internet connection.
This connection is necessary for the cluster nodes to communicate with external Nutanix services for updates, license validation, and other essential operations.
Verify that there are appropriate route tables and security group rules allowing outbound traffic to the Internet from the 10.0.1.0/24 subnet.
Ensure that there is either an Internet Gateway (IGW) attached to the VPC or a NAT Gateway configured if using private subnets.
Reference:
Refer to the Nutanix documentation and AWS VPC configuration guides to ensure proper Internet connectivity and routing setups.
質問 # 33
An administrator has deployed NC2 on AWS. The cluster deployment completed successfully.
After deployment, the administrator created a subnet in AWS, added it as a network in Prism Element, deployed Prism Central using the newly-configured network, and registered the cloud cluster with it.
The on-premises network and AWS are connected via a Site-to-Site VPN. Cluster nodes, CVM, and Prism Central can communicate with each other, but cannot be accessed from the on-premises network.
What two issues might be the cause of this problem? (Choose two.)
- A. The AWS VPC traffic is blocked by a firewall in the on-premises network.
- B. Traffic from the on-premises network is not permitted by VM and Management security groups.
- C. AWS Direct Connect must be used to establish connection between AWS and on-premises
- D. The AHV firewall is blocking traffic from the on-premises network.
正解：A、B
解説：
Traffic from the on-premises network is not permitted by VM and Management security groups:
Ensure that the security groups assigned to the VMs and management interfaces in AWS allow inbound traffic from the on-premises network. Without appropriate security group rules, the traffic will be blocked.
The AWS VPC traffic is blocked by a firewall in the on-premises network:
Check if the firewall on the on-premises network is configured to allow traffic from the AWS VPC. Firewalls may have restrictive rules that block incoming traffic, preventing communication.
Reference:
Refer to AWS documentation on security groups and firewalls and Nutanix documentation on configuring networking for NC2 clusters.
質問 # 34
An administrator planned to create a new NC2 cluster and chose the existing AWS VPC infrastructure in the workflow. The administrator need two private subnets to complete the configuration.
What are these two private subnets used for..
- A. For private NAT and Elastic IP management
- B. For DNS and NTP management
- C. For user VMs and cluster management
- D. For Prism Element and Prism Central management
正解：C
解説：
The requirement for two private subnets in the NC2 cluster configuration workflow serves the same purposes:
One subnet is designated for user VMs, ensuring user workloads are separated from management operations.
The other subnet is designated for cluster management, maintaining the integrity and security of management processes and internal communications.
Reference:
Nutanix Clusters on AWS Deployment Guide
Nutanix Cloud Clusters on AWS Administration
質問 # 35
An administrator is experiencing problems with several operations, including VM IP address assignment validations, VM power-on and VM power-off operations.
Whenever a related operation is performed, an alert is generated in the NC2 console indicating that the Cloud API endpoints are unavailable.
The issue was further investigated and it was determined that NC2 is unable to make API calls to the underlying cloud infrastructure due to network connectivity misconfigurations.
Which two connectivity misconfigurations could be causing this issue? (Choose two.)
- A. Subnets are connected to the Internet via NAT gateways.
- B. Route tables for cloud subnets contain incorrect route entries.
- C. AWS VPC endpoints are used for connectivity to AWS services.
- D. IAM roles and policies are incorrectly configured.
正解：B、D
解説：
Route tables for cloud subnets contain incorrect route entries:
If the route tables associated with the cloud subnets contain incorrect route entries, the NC2 cluster might not be able to reach the necessary AWS services or endpoints. Correct route entries are crucial for ensuring proper communication between the NC2 cluster and the underlying AWS infrastructure.
IAM roles and policies are incorrectly configured:
Incorrectly configured IAM roles and policies can prevent NC2 from making API calls to AWS services. These roles and policies must be properly set up to allow the necessary permissions for NC2 to interact with AWS resources and perform required operations.
Reference:
Refer to the AWS documentation on route table configuration and IAM roles and policies, and Nutanix documentation on NC2 cloud connectivity and permissions.
質問 # 36
An administrator has deployed an NC2 cluster on AWS to an existing environment for VDI.
Afterwards, the corporate security teams direct the administrator to reuse an existing AWS subnet, 10.79.4.0/24 that has two EC2 instances: EC2-1 (10.79.4.200) and EC2-2 (10.79.4.201). The security team indicates that this directive is to avoid overlap with the AHV IPAM.
Which two configuration actions should the administrator take to ensure there are no configuration issues? (Choose two.)
- A. aCLI > net.de/ete_from_ip_blacklist 10.79.4.200 aCLI > net.defete_fromjp_blacklist 10.79.4.201
- B. aCLI > net.add_to_ip_bfacklist 10.79.4.200 aCLI > net.add_to_ip_blacklist 10.79.4.201
- C. Deploy two VMs on the NC2 cluster and assign 10.79.4.200 and 10.79.4.201 as the assigned IPs in Prism Element
- D. Configure the AHV JPAM to use DHCP range 10.79.4.2 -10.79.4.253.
正解：B、D
解説：
To avoid IP address conflicts and ensure there are no configuration issues when reusing an existing AWS subnet, the administrator should take the following actions:
aCLI > net.add_to_ip_blacklist 10.79.4.200 aCLI > net.add_to_ip_blacklist 10.79.4.201 (Answer A):
This command adds the specified IP addresses to the blacklist, preventing AHV IPAM from assigning these addresses to any VMs. This ensures that the existing EC2 instances with IPs 10.79.4.200 and 10.79.4.201 are not allocated to other VMs in the NC2 cluster.
Configure the AHV IPAM to use DHCP range 10.79.4.2 -10.79.4.253 (Answer D):
By configuring the AHV IPAM to use a specific DHCP range, you ensure that the IP addresses assigned to the EC2 instances (10.79.4.200 and 10.79.4.201) are not included in the DHCP pool. This prevents IP address conflicts within the subnet.
Reference:
Nutanix aCLI Reference
Nutanix NC2 on AWS Documentation
AWS VPC and Subnet Basics
質問 # 37
The cluster is configured as follows:
* 8 nodes
* Prism Central Deployed
* Files Deployed
Following the deployment, the administrator experiences network connectivity issues.
Which reason explains the connectivity issues?
- A. The 192.168.5.0/24 range is not a valid CIDR range.
- B. The 192.168.5.0/24 range is reserved for internal cluster usage.
- C. The 192.168.5.0/24 range is reserved by IANA,
- D. The 192.168.5.0/24 range does not have enough IP addresses available.
正解：B
解説：
The 192.168.5.0/24 range is often reserved for internal cluster communication within Nutanix deployments.
Using this CIDR range for other purposes could lead to network conflicts and connectivity issues, as it might interfere with the internal operations and communication channels of the Nutanix cluster.
Ensuring that the CIDR range is not overlapping with any reserved ranges is crucial for maintaining proper network connectivity and cluster functionality.
Reference:
Refer to the Nutanix documentation on network configuration and best practices for NC2 deployments to confirm reserved IP ranges and their appropriate use.
質問 # 38
An administrator has been asked to create a cluster to support new workloads.
What are the maximum number of nodes supported in AWS?
- A. 24 nodes
- B. 28 nodes
- C. 18 nodes
- D. 14 nodes
正解：A
解説：
The maximum number of nodes supported in an NC2 cluster on AWS is 24 nodes. This limit ensures optimal performance and manageability within the AWS infrastructure while leveraging the benefits of the Nutanix architecture.
Reference:
Nutanix Clusters on AWS Deployment Guide
Nutanix Support & Insights
質問 # 39
Which two statements are the most accurate regarding Cluster Protect? (Choose two.)
- A. Nutanix Guest Tools (NGT) is not required to be installed on User VMs.
- B. The dusters that are to be protected must be registered with the same instance of Prism Central.
- C. The Cluster Protect feature requires AOS version 6.7 or higher.
- D. An AWS subnet can be shared by VMs, Prism Central, and Multicloud Snapshort Technology (MST).
正解：B、C
解説：
The clusters that are to be protected must be registered with the same instance of Prism Central (Answer C):
For Cluster Protect to function correctly, all clusters intended for protection must be registered under the same Prism Central instance. This ensures consistent management and coordination of protection policies and operations across clusters.
The Cluster Protect feature requires AOS version 6.7 or higher (Answer D):
Cluster Protect is a feature that is available starting from AOS version 6.7. To utilize this feature, ensure that the Nutanix clusters are running this version or a newer one.
Reference:
Nutanix Cluster Protection Documentation
Nutanix AOS Release Notes
質問 # 40
Which interface must be used to deploy NC2?
- A. NC2 Tile within the my.nutanix.com portal
- B. Cloud Provider portal
- C. Foundation running in a Cloud Virtual Machine
- D. Prism Central Dashboard
正解：A
解説：
The NC2 Tile within the my.nutanix.com portal is the correct interface to deploy NC2. This portal provides an integrated and user-friendly interface specifically designed for deploying and managing Nutanix Clusters on AWS.
NC2 Deployment Interface:
NC2 Tile within the my.nutanix.com portal: This portal provides the necessary tools and options to deploy and manage NC2 clusters. It includes functionalities for setting up the clusters, configuring network settings, and managing resources.
Advantages:
User-Friendly Interface: Simplifies the deployment process with a guided setup.
Integrated Tools: Provides access to all necessary tools for managing the deployment and monitoring of NC2 clusters.
Reference:
Nutanix Cloud Clusters on AWS Administration Guide
Nutanix my.nutanix.com Portal Documentation
Nutanix Best Practices for Cluster Deployment
質問 # 41
Which entity should be contacted for cloud hardware supported (EC2 instances, VPC, etc) related to NC2?
- A. Nutanix
- B. Public Cloud Vendor
- C. Internal IT Operations team
- D. Partner
正解：B
解説：
For issues related to cloud hardware support such as EC2 instances, VPC, etc., the public cloud vendor (AWS in this case) should be contacted. AWS provides support and documentation for their infrastructure and services, ensuring that users can get assistance for any hardware or cloud-specific queries.
Reference:
Nutanix Support & Insights
質問 # 42
Which two features or services can an administrator ensure are protected by cluster protect within an NC2 environment? (Choose two.)
- A. Virtual Machine Disks
- B. VM Templates
- C. Flow Network Security
- D. Nutanix Files
正解：A、D
解説：
Within an NC2 environment, the Cluster Protect feature can ensure the protection of:
Nutanix Files: This provides file services within the Nutanix ecosystem, and Cluster Protect can safeguard the data stored in Nutanix Files.
Virtual Machine Disks: This ensures that the data stored on virtual machine disks is protected, providing backup and recovery options for the virtual machines running within the cluster.
Reference:
Nutanix Cloud Clusters on AWS Administration
Nutanix AOS 6.7 Documentation
質問 # 43
......
Nutanix NCP-CI-AWS 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
Nutanix NCP-CI-AWS試験実践テスト問題：https://jp.fast2test.com/NCP-CI-AWS-premium-file.html
最新の無料NCP-CI-AWS別格問題集をダウンロード：https://drive.google.com/open?id=1rDiu2La_Q187YRhjpMrXYu2bwlKtq85o