2026年最新の検証済み250-587問題と解答で合格保証 もしくは全額返金 [Q163-Q180]

Share

2026年最新のの検証済み250-587問題と解答で合格保証 もしくは全額返金

[2026年06月]更新の250-587認証と実際の解答はここにあるFast2test

質問 # 163
You need to create a storage checkpoint that contains file system metadata and data blocks. You want to ensure that the storage checkpoint that you create can be mounted, accessed, and written in Veritas File System. The storage checkpoint that you create must represent an image of the active file system. Which type of storage checkpoint should you create to meet this goal?

  • A. Create nodata storage checkpoint.
  • B. Create removable storage checkpoint.
  • C. Create data storage checkpoint.
  • D. Create non-mountable storage checkpoint.

正解:C


質問 # 164
A Network Monitor server has been installed and the networking components configured accordingly. The server is receiving traffic, but fails to detect incidents. Running Wireshark indicates that the desired traffic is reaching the detection server. What is the most likely cause for this behavior?

  • A. The mirrored port is sending corrupted packets.
  • B. The communication to the database server is interrupted.
  • C. The configuration is set to process GET requests.
  • D. The wrong interface is selected in the configuration.

正解:A


質問 # 165
You are not able to find a physical device corresponding to the disk ID in the disk media record when one of the subdisks associated with the plex fails. You need to check the plex state to solve the problem. What will be the status of the plex in this situation?

  • A. NODEVICE
  • B. INACTIVE
  • C. DISCONNECTED
  • D. UNENABLED

正解:A


質問 # 166
A DLP administrator needs to have the Email Prevent Server return inspected emails to the same MTA from which it receives the message. In which mode should the Email Prevent server be configured?

  • A. reflect
  • B. trial
  • C. mirror
  • D. forward

正解:A


質問 # 167
How do you change the time limit for an I/O request in Dynamic Multi-Pathing (DMP) in Veritas Volume Manager on a Solaris operating system?

  • A. Modify the /kernel/drv/vxdmp.conf file by adding dmp_failed_io_threshold tunable parameter.
  • B. Modify the /kernel/drv/vxio.conf file by adding dmp_failed_io_threshold tunable parameter.
  • C. Modify the /kernel/drv/vxdmp.conf file by adding vol_maxio tunable parameter.
  • D. Modify the /kernel/drv/vxdmp.conf and /kernel/drv/vxio.conf files by adding dmp_failed_io_threshold tunable parameter.

正解:A


質問 # 168
Which command will you run to get the full path name of the file, if you only have the inode number?

  • A. vxquot
  • B. vxquota
  • C. vxlsino
  • D. vxfsstat

正解:C


質問 # 169
Which is the correct installation sequence?

  • A. Enforce > Oracle > Solution pack > detection server
  • B. Enforce > Oracle > detection server > Solution pack
  • C. Oracle > Enforce > detection server > Solution pack
  • D. Oracle > Enforce > Solution pack > detection server

正解:D


質問 # 170
You are working on Veritas Storage Foundation for Oracle RAC and want to create a disk group on the shared disks. You execute the command vxdctl -c mode on a node. What will be the output of this command?

  • A. The command will display whether the node is a master or slave.
  • B. The command will change the node from slave to master.
  • C. The command will change the node from master to slave.
  • D. The command will create a disk group on the shared disk.

正解:A


質問 # 171
How many free partitions do you need to encapsulate a boot disk?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

正解:B


質問 # 172
An organization needs to implement a solution that will protect its sensitive information while allowing its mobile device users to access sites and applications such as Facebook, Dropbox, and Twitter. Which Symantec Data Loss Prevention solution should the organization use to protect its information?

  • A. Mobile Prevent
  • B. Mobile Email Monitor
  • C. Network Prevent
  • D. Endpoint Prevent

正解:A


質問 # 173
Refer to the exhibit.

Symantec Data Loss Prevention's four phases of risk reduction model provides a blueprint for identifying and remediating key risk areas without disrupting legitimate business activity. According to this model, which activity should occur during the baseline phase?

  • A. establish business metrics and begin sending reports to business unit stakeholders
  • B. test policies to ensure that blocking actions minimize business process disruptions
  • C. monitor incidents and tune the policy to reduce false positives
  • D. define and build the incident response team

正解:C


質問 # 174
ou have gathered file I/O performance data from an Oracle Enterprise database. The database is using one filesystem on a striped volume. You want to use the performance data to adjust the system configuration to ensure efficient use of system resources. Which specific activity should you should perform to adjust the system configuration?

  • A. Raw disk I/O activity
  • B. Volume I/O activity
  • C. File I/O activity
  • D. All I/O activity

正解:C


質問 # 175
Refer to the exhibit.

An administrator needs to implement a Mobile Email Monitor solution to inspect corporate emails on mobile devices. Where should the administrator place the web proxy?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

正解:B


質問 # 176
You want to use the VxSE rule to detect whether a physical disk has too many RAID-5 logs. Before you execute the VxSE rule, you want to acquire complete information about the rule. How would you search for the VxSE rule that informs you whether a physical disk has too many RAID-5 logs on it?

  • A. Look in the rules directory, run each rule with the "info" operator, and choose the rule you want.
  • B. Use the vxse_inventory command.
  • C. Use the vxse "list" command.
  • D. Look in the rules directory, run each rule with the "check" operator, and choose the rule you want based on its output.

正解:A


質問 # 177
While encapsulating a disk, you discover that a volume is removed as a part of the existing configuration. You want to restore the data on the disk as it was before removal of the disk. As the first step, you recreate the volume using the vxdg make command. What should you do next?

  • A. Restore the data on the volume
  • B. Replace the disk
  • C. Start the hot-relocation process
  • D. Restore the plexes on the volume

正解:A


質問 # 178
You administer storage for multiple hosts supporting a large OLTP application. Host Mkt operates both within the secure intranet, and host Store operates in a DMZ environment. Store stages detailed transaction logs on a volume named s_detail in a disk group named s_dat a. You need to deliver large batches of transaction data history from host Store to host Mkt for market analysis, and to receive the results of that analysis, as part of a weekly routine. To deliver sales history to the marketing host, what sequence of actions must you carry out? Place the following actions in order. 1. Use vxdg to deport the snapshot volume's disk group from host Store. 2. Use vxdg to import the snapshot volume into host Mkt. 3. Use vxsnap to create a snapshot of s_detail on s_data. 4. Use the vxsnap command to enable FastResync on s_detail. 5. Use vxdg to split the snapshot volume away from s_data, into a separate disk group.

  • A. 5,4,1,2,3
  • B. 5,2,4,1,3
  • C. 4,2,5,3,1
  • D. 4,5,2,1,3

正解:D


質問 # 179
You want to remove the disk named datadg01 from the disk group named datadg. You also want to remove the public and private regions from the disk. However, you want to retain the data stored on the disk. Which commands will you use to achieve this?

  • A. vxdg rmdisk vxevac vxdiskunsetup
  • B. vxevac vxdg rmdisk vxdiskunsetup
  • C. vxdiskunsetup vxdg rmdisk vxevac
  • D. vxremove vxdg evac vxdisk rmdisk

正解:A


質問 # 180
......

250-587リアル有効で正確な問題集303問題と解答が待ってます:https://jp.fast2test.com/250-587-premium-file.html

最新の250-587問題集でPDF:https://drive.google.com/open?id=1ilbdkIXrJkeeOrl-zL3uy4mXQl4cQLHn


弊社を連絡する

我々は12時間以内ですべてのお問い合わせを答えます。

我々の働いている時間: ( GMT 0:00-15:00 )
月曜日から土曜日まで

サポート: 現在連絡 

English Deutsch 繁体中文 한국어