[2025年04月21日] 究極のAZ-104準備ガイド！無料最新のMicrosoft練習テスト問題集 [Q306-Q324]

[2025年04月21日] 究極のAZ-104準備ガイド！無料最新のMicrosoft練習テスト問題集

今すぐゲットせよ！高評価Microsoft AZ-104試験問題集

Microsoft AZ-104試験は、Azure管理者のための入門レベルの認定試験とされています。Azureに新しい人やプラットフォームの管理について学びたい人にとっては、素晴らしいスタート地点です。また、すでにAzureを使用しているプロフェッショナルでも、Azureリソースの管理に関する知識とスキルを向上させたい場合に適しています。

Microsoft AZ-104試験は、Azure Administrationの経験があり、クラウドコンピューティングテクノロジーを強く理解している個人を対象としています。この試験に合格した候補者は、Azure Administrationの専門知識を実証することができ、Azure Servicesと協力してアプリケーションとサービスを展開、管理、監視することができます。この認定はグローバルに認識されており、Azure Servicesを使用する組織から高く評価されています。この認定は、個人がクラウドコンピューティングでキャリアを促進し、新しい雇用機会を開くのに役立ちます。

質問 # 306
You have a virtual network named VNET1 that contains the subnets shown in the following table:

You have two Azure virtual machines that have the network configurations shown in the following table:

For NSG1, you create the inbound security rule shown in the following table:

For NSG2, you create the inbound security rule shown in the following table:

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

正解：

解説：

Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/security-overview

質問 # 307
You have an Azure subscription named Subscription1. Subscription1 contains a virtual machine named VM1.
You install and configure a web server and a DNS server on VM1.
VM1 has the effective network security rules shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.

正解：

解説：

Box 1:
Rule2 blocks ports 50-60, which includes port 53, the DNS port. Internet users can reach the Web server, since it uses port 80.
Box 2:
If Rule2 is removed internet users can reach the DNS server as well.
Note: Rules are processed in priority order, with lower numbers processed before higher numbers, because lower numbers have higher priority. Once traffic matches a rule, processing stops. As a result, any rules that exist with lower priorities (higher numbers) that have the same attributes as rules with higher priorities are not processed.
References:
https://docs.microsoft.com/en-us/azure/virtual-network/security-overview

質問 # 308
HOTSPOT
You have an Azure subscription named Subscription1 that contains the resources shown in the following table:

You plan to configure Azure Backup reports for Vault1.
You are configuring the Diagnostics settings for the AzureBackupReports log.
Which storage accounts and which Log Analytics workspaces can you use for the Azure Backup reports of Vault1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

正解：

解説：

Section: [none]
Explanation:
Box 1: storage1, storage2, and storage3
The location and subscription where this Log Analytics workspace can be created is independent of the location and subscription where your vaults exist.
Box 2: Analytics3
Vault1 and Analytics3 are both in West Europe.
Reference:
https://docs.microsoft.com/en-us/azure/backup/backup-azure-configure-reports

質問 # 309
You create an Azure Migrate project named TestMig in a resource group named test-migration.
You need to discover which on-premises virtual machines to assess for migration.
Which three actions should you perform in sequence? To answer, select the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

正解：

解説：

Explanation

Step 1: Download the OVA file for the collection appliance
Azure Migrate uses an on-premises VM called the collector appliance, to discover information about your on-premises machines. To create the appliance, you download a setup file in Open Virtualization Appliance (.ova) format, and import it as a VM on your on-premises vCenter Server.
Step 2: Create a migration group in the project
For the purposes of assessment, you gather the discovered VMs into groups. For example, you might group VMs that run the same application. For more precise grouping, you can use dependency visualization to view dependencies of a specific machine, or for all machines in a group and refine the group.
Step 3: Create an assessment in the project
After a group is defined, you create an assessment for it.
References:
https://docs.microsoft.com/en-us/azure/migrate/migrate-overview

質問 # 310
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an app named App1 that is installed on two Azure virtual machines named VM1 and VM2.
Connections to App1 are managed by using an Azure Load Balancer.
The effective network security configurations for VM2 are shown in the following exhibit.

You discover that connections to App1 from 131.107.100.50 over TCP port 443 fail. You verify that the Load Balancer rules are configured correctly.
You need to ensure that connections to App1 can be established successfully from 131.107.100.50 over TCP port 443.
Solution: You modify the priority of the Allow_131.107.100.50 inbound security rule.
Does this meet the goal?

A. No
B. Yes

正解：A

質問 # 311
Your network contains an on-premises Active Directory domain named adatum.com. The domain contains an organizational unit (OU) named OU1. OU1 contains the objects shown in the following table.

You sync OU1 to Azure Active Directory (Azure AD) by using Azure AD Connect.
You need to identify which objects are synced to Azure AD.
Which objects should you identify?

A. User1, Group1, and Group2 only
B. User1, Group1, Group2, and Computer1
C. User1 and Group1 only
D. Computer1 only

正解：A

解説：
Reference:
https://docs.microsoft.com/en-us/azure/active-directory-domain-services/synchronization

質問 # 312
You implement the planned changes for NSG1 and NSG2.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

正解：

解説：

質問 # 313
You have an Azure subscription that contains an Azure Storage account named storageaccount1.
You export storageaccount1 as an Azure Resource Manager template. The template contains the following sections.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

正解：

解説：

質問 # 314
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure virtual machine named VM1 that runs Windows Server 2016.
You need to create an alert in Azure when more than two error events are logged to the System log on VM1 within an hour.
Solution: You create an event subscription on VM1. You create an alert in Azure Monitor and specify VM1 as the source.
Does this meet the goal?

A. No
B. Yes

正解：A

解説：
Instead: You create an Azure Log Analytics workspace and configure the data settings. You install the Microsoft Monitoring Agent on VM1. You create an alert in Azure Monitor and specify the Log Analytics workspace as the source.
References:
https://docs.microsoft.com/en-us/azure/azure-monitor/platform/agents-overview

質問 # 315
You have an Azure subscription named Sub1.
You plan to deploy a multi-tiered application that will contain the tiers shown in the following table.

You need to recommend a networking solution to meet the following requirements:
* Ensure that communication between the web servers and the business logic tier spreads equally across the virtual machines.
* Protect the web servers from SQL injection attacks.
Which Azure resource should you recommend for each requirement? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

正解：

解説：

Explanation

Box 1: an internal load balancer
Azure Internal Load Balancer (ILB) provides network load balancing between virtual machines that reside inside a cloud service or a virtual network with a regional scope.
Box 2: an application gateway that uses the WAF tier
Azure Web Application Firewall (WAF) on Azure Application Gateway provides centralized protection of your web applications from common exploits and vulnerabilities. Web applications are increasingly targeted by malicious attacks that exploit commonly known vulnerabilities.
References:
https://docs.microsoft.com/en-us/azure/web-application-firewall/ag/ag-overview

質問 # 316
You have a network security group (NSG) named NSG1 that has the rules defined in the exhibit. (Click the Exhibit tab.)

NSG1 is associated to a subnet named Subnet1. Subnet1 contains the virtual machines shown in the following table.
You need to add a rule to NSG1 to ensure that VM1 can ping VM2. The solution must use the principle of least privilege.
How should you configure the rule? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

正解：

解説：

Reference:
https://www.thomasmaurer.ch/2019/09/how-to-enable-ping-icmp-echo-on-an-azure-vm/

質問 # 317
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription that contains the virtual machines shown in the following table.
You deploy a load balancer that has the following configurations:
*Name: LB1
*Type: Internal
*SKU: Standard
*Virtual network: VNET1
You need to ensure that you can add VM1 and VM2 to the backend pool of LB1.
Solution: You create two Standard public IP addresses and associate a Standard SKU public IP address to the network interface of each virtual machine.
Does this meet the goal?

A. No
B. Yes

正解：B

質問 # 318
You need to ensure that User1 can create initiative definitions, and User4 can assign initiatives to RG2. The solution must meet the technical requirements.
Which role should you assign to each user? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

正解：

解説：

Explanation:

Reference:
https://docs.microsoft.com/en-us/azure/governance/policy/overview

質問 # 319
You have a sync group that has the endpoints shown in the following table.

Cloud tiering is enabled for Endpoint3.
You add a file named File1 to Endpoint1 and a file named File2 to Endpoint2.
You need to identify on which endpoints File1 and File2 will be available within 24 hours of adding the files.
What should you identify? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

正解：

解説：

Explanation

File1: Endpoint3 only
Cloud Tiering: A switch to enable or disable cloud tiering. When enabled, cloud tiering will tier files to your Azure file shares. This converts on-premises file shares into a cache, rather than a complete copy of the dataset, to help you manage space efficiency on your server. With cloud tiering, infrequently used or accessed files can be tiered to Azure Files.
File2: Endpoint1, Endpoint2, and Endpoint3
References:
https://docs.microsoft.com/en-us/azure/storage/files/storage-sync-cloud-tiering

質問 # 320
You have an Azure subscription that contains a policy-based virtual network gateway named GW1 and a virtual network named VNet1.
You need to ensure that you can configure a point-to-site connection from an on-premises computer to VNet1.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Add a connection to GW1
B. Reset GW1
C. Add a service endpoint to VNet1
D. Add a public IP address space to VNet1
E. Delete GW1
F. Create a route-based virtual network gateway

正解：E、F

解説：
C: A VPN gateway is used when creating a VPN connection to your on-premises network.
Route-based VPN devices use any-to-any (wildcard) traffic selectors, and let routing/forwarding tables direct traffic to different IPsec tunnels. It is typically built on router platforms where each IPsec tunnel is modeled as a network interface or VTI (virtual tunnel interface).
E: Policy-based VPN devices use the combinations of prefixes from both networks to define how traffic is encrypted/decrypted through IPsec tunnels. It is typically built on firewall devices that perform packet filtering. IPsec tunnel encryption and decryption are added to the packet filtering and processing engine.
Incorrect Answers:
F: Point-to-Site connections do not require a VPN device or a public-facing IP address.
Reference:
https://docs.microsoft.com/en-us/azure/vpn-gateway/create-routebased-vpn-gateway-portal
https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-connect-multiple-policybased-rm-ps

質問 # 321
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an app named App1 that is installed on two Azure virtual machines named VM1 and VM2.
Connections to App1 are managed by using an Azure Load Balancer.
The effective network security configurations for VM2 are shown in the following exhibit.

You discover that connections to App1 from 131.107.100.50 over TCP port 443 fail. You verify that the Load Balancer rules are configured correctly.
You need to ensure that connections to App1 can be established successfully from 131.107.100.50 over TCP port 443.
Solution: You create an inbound security rule that denies all traffic from the 131.107.100.50 source and has a cost of 64999.
Does this meet the goal?

A. No
B. Yes

正解：B

質問 # 322
You have an Azure Active Directory (Azure AD) tenant named contoso.com that contains the users shown in the following table:

User3 is the owner of Group1.
Group2 is a member of Group1.
You configure an access review named Review1 as shown in the following exhibit:

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

正解：

解説：

Explanation

Reference:
https://docs.microsoft.com/en-us/azure/active-directory/governance/create-access-review

質問 # 323
You are evaluating the connectivity between the virtual machines after the planned implementation of the Azure networking infrastructure.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.

正解：

解説：

Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-peering-overview
https://docs.microsoft.com/en-us/azure/networking/networking-overview#internet-connectivity Overview Contoso, Ltd. is a manufacturing company that has offices worldwide. Contoso works with partner organizations to bring products to market.
Contoso products are manufactured by using blueprint files that the company authors and maintains.
Topic 2, Litware, inc.
Existing Environment
The network contains an Active Directory forest named Litware.com. All domain controllers are configured as DNS servers and host the Litware.com DNS zone.
Litware has finance, human resources, sales, research, and information technology departments. Each department has an organizational unit (OU) that contains all the accounts of that respective department. All the user accounts have the department attribute set to their respective department. New users are added frequently.
Litware.com contains a user named User1.
All the offices connect by using private links.
Litware has data centers in the Montreal and Seattle offices. Each data center has a firewall that can be configured as a VPN device.
All infrastructure servers are virtualized. The virtualization environment contains the servers in the following table.

Litware uses two web applications named App1 and App2. Each instance on each web application requires 1GB of memory.
The Azure subscription contains the resources in the following table.

The network security team implements several network security groups (NSGs).
Planned Changes
Litware plans to implement the following changes:
* Deploy Azure ExpressRoute to the Montreal office.
* Migrate the virtual machines hosted on Server1 and Server2 to Azure.
* Synchronize on-premises Active Directory to Azure Active Directory (Azure AD).
* Migrate App1 and App2 to two Azure web apps named webApp1 and WebApp2.
Technical Requirements
Litware must meet the following technical requirements:
* Ensure that WebApp1 can adjust the number of instances automatically based on the load and can scale up to five instance*.
* Ensure that VM3 can establish outbound connections over TCP port 8080 to the applications servers in the Montreal office.
* Ensure that routing information is exchanged automatically between Azure and the routers in the Montreal office.
* Enable Azure Multi-Factor Authentication (MFA) for the users in the finance department only.
* Ensure that webapp2.azurewebsites.net can be accessed by using the name app2.Litware.com.
* Connect the New Your office to VNet1 over the Internet by using an encrypted connection.
* Create a workflow to send an email message when the settings of VM4 are modified.
* Create a custom Azure role named Role1 that is based on the Reader role.
* Minimize costs whenever possible.