合格目指せAZ-104試験最新のAZ-104試験問題集PDF 2025年更新
AZ-104試験問題集、365日更新無料サンプル
Microsoft AZ-104認定試験は、Azure Administrationの知識とスキルを実証したいITの専門家に最適です。この認定は、Azure Technologiesの経験があり、スキルを次のレベルに引き上げたい個人に適しています。また、他のITの役割からAzure政権に移行しようとしているIT専門家にも適しています。
質問 # 268
Note: This question is part of a series questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You manage a virtual network named Vnet1 that is hosted in the West US Azure region. VNet hosts two virtual machines named VM1 and VM2 run Windows Server.
You need to inspect all the network traffic from VM1 to VM2 for a period of three hours.
Solution: From Azure Network Watcher, you create a connection monitor.
Does this meet the goal?
- A. YES
- B. NO
正解：B
解説：
Connection Monitor only gives a 'red/green' status for a given connection, whereas the question states you need to see all traffic.
https://docs.microsoft.com/en-us/azure/network-watcher/network-watcher-packet-capture- overview
質問 # 269
You have an Azure subscription that contains a virtual machine scale set. The scale set contains four instances that have the following configurations:
* Operating system: Windows Server 2016
* Size: Standard_D1_v2
You run the get-azvmss cmdlet as shown in the following exhibit:
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
正解：
解説：
Explanation
he Get-AzVmssVM cmdlet gets the model view and instance view of a Virtual Machine Scale Set (VMSS) virtual machine.
Box 1: 0
The enableAutomaticUpdates parameter is set to false. To update existing VMs, you must do a manual upgrade of each existing VM.
Box 2: 1
Below is clearly mentioned in the official Website
"The upgrade orchestrator identifies the batch of VM instances to upgrade, with any one batch having a maximum of 20% of the total instance count, subject to a minimum batch size of one virtual machine." So, 20% from 4 ~1
Reference:
https://docs.microsoft.com/en-us/azure/virtual-machine-scale-sets/virtual-machine-scale-sets-upgrade-scale-set
https://docs.microsoft.com/en-us/azure/virtual-machine-scale-sets/virtual-machine-scale-sets-automatic-upgrade
質問 # 270
You have an Azure subscription that contains an Azure Active Directory (Azure AD) tenant named contoso.com and an Azure Kubernetes Service (AKS) cluster named AKS1.
An administrator reports that she is unable to grant access to AKS1 to the users in contoso.com.
You need to ensure that access to AKS1 can be granted to the contoso.com users.
What should you do first?
- A. Recreate AKS1.
- B. From AKS1, create a namespace.
- C. From contoso.com, modify the Organization relationships settings.
- D. From contoso.com, create an OAuth 2.0 authorization endpoint.
正解：D
解説：
Explanation
With Azure AD-integrated AKS clusters, you can grant users or groups access to Kubernetes resources within a namespace or across the cluster. To obtain a kubectl configuration context, a user can run the az aks get-credentials command. When a user then interacts with the AKS cluster with kubectl, they're prompted to sign in with their Azure AD credentials. This approach provides a single source for user account management and password credentials. The user can only access the resources as defined by the cluster administrator.
Azure AD authentication is provided to AKS clusters with OpenID Connect. OpenID Connect is an identity layer built on top of the OAuth 2.0 protocol. For more information on OpenID Connect, see the Open ID connect documentation. From inside of the Kubernetes cluster, Webhook Token Authentication is used to verify authentication tokens. Webhook token authentication is configured and managed as part of the AKS cluster.
Reference:
https://kubernetes.io/docs/reference/access-authn-authz/authentication/
https://docs.microsoft.com/en-us/azure/aks/concepts-identity
質問 # 271
Your company has a main office in Australia and several branch offices in Asia.
The company's data center uses a VMware virtualization infrastructure to host several virtualized servers.
You purchase an Azure subscription and plan to move all virtual machines to Azure to a resource group in the Australia Southeast location.
You need to create an Azure Migrate migration project.
Which geography should you select?
- A. Central India
- B. United States
- C. Australia Southeast
- D. Australia Central
正解：C
解説：
Explanation
In Project Details, specify the project name, and geography in which you want to create the project. Review supported geographies for public and government clouds.
References:
https://docs.microsoft.com/en-us/azure/migrate/how-to-add-tool-first-time
質問 # 272
You have an Azure subscription that contains the resources shown in the following table.
VM1 connects to VNET1.
You need to connect VM1 to VNET2.
Solution: You turn off VM1, and then you add a new network interface to VM1. Does this meet the goal?
- A. No
- B. Yes
正解：A
解説：
Explanation
Instead you should delete VM1. You recreate VM1, and then you add the network interface for VM1.
Note: When you create an Azure virtual machine (VM), you must create a virtual network (VNet) or use an existing VNet. You can change the subnet a VM is connected to after it's created, but you cannot change the VNet.
References:
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/network-overview
質問 # 273
You have an Azure subscription that contains the resources shown in the following table.
VM1 connects to VNET1.
You need to connect VM1 to VNET2.
Solution: You create a new network interface, and then you add the network interface to VM1.
Does this meet the goal?
- A. No
- B. Yes
正解：A
解説：
Explanation
Instead you should delete VM1. You recreate VM1, and then you add the network interface for VM1.
Note: When you create an Azure virtual machine (VM), you must create a virtual network (VNet) or use an existing VNet. You can change the subnet a VM is connected to after it's created, but you cannot change the VNet.
References:
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/network-overview
質問 # 274
You have an Azure subscription that contains a user named User1 and the resources shown in the following table.
NSG1 is associated to networkinterface1.
User1 has role assignments tor NSG1 as shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE Each correct selection is worth one point.
正解：
解説：
質問 # 275
You purchase a new Azure subscription named Subscription1.
You create a virtual machine named VM1 in Subscription1. VM1 is not protected by Azure Backup.
You need to protect VM1 by using Azure Backup. Backups must be created at 01:00 and stored for 30 days.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
解説：
Reference:
https://docs.microsoft.com/en-us/azure/backup/backup-configure-vault
https://docs.microsoft.com/en-us/azure/backup/backup-azure-backup-faq
A Recovery Services vault is a storage entity in Azure that houses dat
a. The data is typically copies of data, or configuration information for virtual machines (VMs), workloads, servers, or workstations. You can use Recovery Services vaults to hold backup data for various Azure services such as IaaS VMs (Linux or Windows) and Azure SQL databases.
You can use backup policy to configure schedule.
https://docs.microsoft.com/en-us/azure/backup/backup-azure-recovery-services-vault-overview
https://docs.microsoft.com/en-us/azure/backup/backup-azure-vms-first-look-arm
https://docs.microsoft.com/en-us/azure/backup/backup-azure-recovery-services-vault-overview
https://docs.microsoft.com/en-us/azure/backup/backup-azure-vms-first-look-arm
質問 # 276
You enable password reset for contoso.onmicrosoft.com as shown in the Password Reset exhibit (Click the Password Reset tab.)
You configure the authentication methods for password reset as shown in the Authentication Methods exhibit. (Click the Authentication Methods tab.) For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
You enable password reset for contoso.onmicrosoft.com as shown in the Password Reset exhibit (Click the Password Reset tab.) You configure the authentication methods for password reset as shown in the Authentication Methods exhibit. (Click the Authentication Methods tab.) For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
正解：
解説：
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/authentication/quickstart-sspr
https://docs.microsoft.com/en-us/azure/active-directory/authentication/active-directory-passwords-faq
質問 # 277
Your network contains an Active Directory domain named adatum.com and an Azure Active Directory (Azure AD) tenant named adatum.onmicrosoft.com.
Adatum.com contains the user accounts in the following table.
Adatum.onmicrosoft.com contains the user accounts in the following table.
You need to implement Azure AD Connect. The solution must follow the principle of least privilege.
Which user accounts should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
解説：
質問 # 278
You need to use Azure Automation State Configuration to manage the ongoing consistency of virtual machine configurations.
Which five actions should you perform in sequence? To answer, move the appropriate action from the list of actions to the answer area and arrange them in the correct order.
NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.
正解：
解説：
Explanation
Step 1: Upload a configuration to Azure Automation State Configuration.
Import the configuration into the Automation account.
Step 2: Compile a configuration into a node configuration.
A DSC configuration defining that state must be compiled into one or more node configurations (MOF document), and placed on the Automation DSC Pull Server.
Step 3: Onboard the virtual machines to Azure Automation State Configuration.
Onboard the Azure VM for management with Azure Automation State Configuration Step 4: Assign the node configuration Step 5: Check the compliance status of the node Each time Azure Automation State Configuration performs a consistency check on a managed node, the node sends a status report back to the pull server. You can view these reports on the page for that node.
On the blade for an individual report, you can see the following status information for the corresponding consistency check:
The report status - whether the node is "Compliant", the configuration "Failed", or the node is "Not Compliant" References:
https://docs.microsoft.com/en-us/azure/automation/automation-dsc-getting-started
質問 # 279
You have an Azure subscription that contains an Azure file share.
You have an on-premises server named Server1 that runs Windows Server 2016.
You plan to set up Azure File Sync between Server1 and the Azure file share.
You need to prepare the subscription for the planned Azure File Sync.
Which two actions should you perform in the Azure subscription? To answer, drag the appropriate actions to the correct targets. Each action may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
正解：
解説：
As per the official MS doc:
The recommended steps to onboard on Azure File Sync for the first with zero downtime while preserving full file fidelity and access control list (ACL) are as follows:
1. Deploy a Storage Sync Service. --> This needs to be done on Azure .
2. Create a sync group. --> This needs to be done on Azure
3. Install Azure File Sync agent on the server with the full data set. --> This needs to be done on server1.
4. Register that server and create a server endpoint on the share. --> This needs to be done on server1.
5. Let sync do the full upload to the Azure file share (cloud endpoint).
6. After the initial upload is complete, install Azure File Sync agent on each of the remaining servers.
7. Create new file shares on each of the remaining servers.
8. Create server endpoints on new file shares with cloud tiering policy, if desired. (This step requires additional storage to be available for the initial setup.)
9. Let Azure File Sync agent do a rapid restore of the full namespace without the actual data transfer. After the full namespace sync, sync engine will fill the local disk space based on the cloud tiering policy for the server endpoint.
10. Ensure sync completes and test your topology as desired.
11. Redirect users and applications to this new share.
12. You can optionally delete any duplicate shares on the servers.
First action: Create a Storage Sync Service
The deployment of Azure File Sync starts with placing a Storage Sync Service resource into a resource group of your selected subscription.
Second action: Create a sync group
A sync group defines the sync topology for a set of files. Endpoints within a sync group are kept in sync with each other. A sync group must contain one cloud endpoint, which represents an Azure file share and one or more server endpoints. A server endpoint represents a path on a registered server. A server can have server endpoints in multiple sync groups. You can create as many sync groups as you need to appropriately describe your desired sync topology.
Third action: Run Server Registration
Registering your Windows Server with a Storage Sync Service establishes a trust relationship between your server (or cluster) and the Storage Sync Service. A server can only be registered to one Storage Sync Service and can sync with other servers and Azure file shares associated with the same Storage Sync Service. )
Reference:
https://docs.microsoft.com/en-us/azure/storage/files/storage-sync-files-deployment-guide?tabs=azure-portal
質問 # 280
You have an Azure subscription named Subcription1 that contains the storage accounts shown in the following table.
You plan 10 use the Azure Import/Export service to export data from Subscription1.
- A. storage4
- B. storage1
- C. storage3
- D. storage2
正解：A
質問 # 281
You have a Recovery Service vault that you use to test backups. The test backups contain two protected virtual machines.
You need to delete the Recovery Services vault.
What should you do first?
- A. From the Recovery Service vault, stop the backup of each backup item.
- B. Modify the locks of each virtual machine.
- C. From the Recovery Service vault, delete the backup data.
- D. Modify the disaster recovery properties of each virtual machine.
正解：A
解説：
Section: [none]
Explanation:
You can't delete a Recovery Services vault if it is registered to a server and holds backup data. If you try to delete a vault, but can't, the vault is still configured to receive backup data.
Remove vault dependencies and delete vault
In the vault dashboard menu, scroll down to the Protected Items section, and click Backup Items. In this menu, you can stop and delete Azure File Servers, SQL Servers in Azure VM, and Azure virtual machines.
Reference:
https://docs.microsoft.com/en-us/azure/backup/backup-azure-delete-vault
質問 # 282
You need to the appropriate sizes for the Azure virtual for Server2.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
解説：
Reference:
https://docs.microsoft.com/en-us/azure/site-recovery/migrate-tutorial-on-premises-azure
Topic 2, Humongous Insurance
Existing Environment
Huongous Insurance is an insurance company that has three offices in Miami, Tokoyo, and Bankok. Each has 5000 users.
Active Directory Environment
Humongous Insurance has a single-domain Active Directory forest named humongousinsurance.com. The functional level of the forest is Windows Server 2012.
You recently provisioned an Azure Active Directory (Azure AD) tenant.
Network Infrastructure
Each office has a local data center that contains all the servers for that office. Each office has a dedicated connection to the Internet.
Each office has several link load balancers that provide access to the servers.
Active Directory Issue
Several users in humongousinsurance.com have UPNs that contain special characters.
You suspect that some of the characters are unsupported in Azure AD.
Licensing Issue
You attempt to assign a license in Azure to several users and receive the following error message: "Licenses not assigned. License agreement failed for one user." You verify that the Azure subscription has the available licenses.
Requirements
Planned Changes
Humongous Insurance plans to open a new office in Paris. The Paris office will contain 1,000 users who will be hired during the next 12 months. All the resources used by the Paris office users will be hosted in Azure.
Planned Azure AD Infrastructure
The on-premises Active Directory domain will be synchronized to Azure AD.
All client computers in the Paris office will be joined to an Azure AD domain.
Planned Azure Networking Infrastructure
You plan to create the following networking resources in a resource group named All_Resources:
Default Azure system routes that will be the only routes used to route traffic A virtual network named Paris-VNet that will contain two subnets named Subnet1 and Subnet2 A virtual network named ClientResources-VNet that will contain one subnet named ClientSubnet A virtual network named AllOffices-VNet that will contain two subnets named Subnet3 and Subnet4 You plan to enable peering between Paris-VNet and AllOffices-VNet. You will enable the Use remote gateways setting for the Paris-VNet peerings.
You plan to create a private DNS zone named humongousinsurance.local and set the registration network to the ClientResources-VNet virtual network.
Planned Azure Computer Infrastructure
Each subnet will contain several virtual machines that will run either Windows Server 2012 R2, Windows Server 2016, or Red Hat Linux.
Department Requirements
Humongous Insurance identifies the following requirements for the company's departments:
Web administrators will deploy Azure web apps for the marketing department. Each web app will be added to a separate resource group. The initial configuration of the web apps will be identical. The web administrators have permission to deploy web apps to resource groups.
During the testing phase, auditors in the finance department must be able to review all Azure costs from the past week.
Authentication Requirements
Users in the Miami office must use Azure Active Directory Seamless Single Sign-on (Azure AD Seamless SSO) when accessing resources in Azure.
質問 # 283
You have an Azure subscription.
You have an on-premises virtual machine named VM1. The settings for VM1 are shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can use the disks attached to VM1 as a template for Azure virtual machines.
What should you modify on VM1?
- A. the processor
- B. the memory
- C. the network adapters
- D. the hard drive
- E. Integration Services
正解：D
解説：
From the exhibit we see that the disk is in the VHDX format.
Before you upload a Windows virtual machines (VM) from on-premises to Microsoft Azure, you must prepare the virtual hard disk (VHD or VHDX). Azure supports only generation 1 VMs that are in the VHD file format and have a fixed sized disk. The maximum size allowed for the VHD is 1,023 GB. You can convert a generation 1 VM from the VHDX file system to VHD and from a dynamically expanding disk to fixed-sized.
Reference:
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/prepare-for-upload-vhd-image?toc=%2fazure%2fvirtual-machines%2fwindows%2ftoc.json
質問 # 284
Your company has three offices. The offices are located in Miami, Los Angeles, and New York.
Each office contains datacenter.
You have an Azure subscription that contains resources in the East US and West US Azure regions. Each region contains a virtual network. The virtual networks are peered.
You need to connect the datacenters to the subscription. The solution must minimize network latency between the datacenters.
What should you create?
- A. three virtual hubs and one virtual WAN
- B. three On-premises data gateways and one Azure Application Gateway
- C. three Azure Application Gateways and one On-premises data gateway
- D. three virtual WANs and one virtual hub
正解：A
解説：
Virtual WAN: The virtualWAN resource represents a virtual overlay of your Azure network and is a collection of multiple resources. It contains links to all your virtual hubs that you would like to have within the virtual WAN. Virtual WAN resources are isolated from each other and can't contain a common hub. Virtual hubs across Virtual WAN don't communicate with each other.
Hub: A virtual hub is a Microsoft-managed virtual network. The hub contains various service endpoints to enable connectivity. From your on-premises network (vpnsite), you can connect to a VPN gateway inside the virtual hub, connect ExpressRoute circuits to a virtual hub, or even connect mobile users to a point-to-site gateway in the virtual hub. The hub is the core of your network in a region. Multiple virtual hubs can be created in the same region.
質問 # 285
Peering for VNET2 is configured as shown in the following exhibit.
Peering for VNET3 is configured as shown in the following exhibit.
How can packets be routed between the virtual networks? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
解説：
Explanation:
Box 1. VNET2 and VNET3
Box 2: VNET1
Gateway transit is disabled.
Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-peering-overview
質問 # 286
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You deploy an Azure Kubernetes Service (AKS) cluster named AKS1.
You need to deploy a YAML file to AKS1.
Solution: From the Azure CLI, you run the kubectl client.
Does this meet the goal?
- A. No
- B. Yes
正解：A
解説：
Installing Azure CLI doesn't mean that Azure Kubernates client is installed. So before running kubectl client command, you have install kubectl, the Kubernetes command-line client.
First need to run az aks install-cli to install Kubernetes CLI, which is kubectl
Reference:
https://docs.microsoft.com/en-us/cli/azure/aks?view=azure-cli-latest
質問 # 287
You have an Azure Active Directory (Azure AD) tenant that has Azure AD Privileged Identity Management configured.
You have 10 users who are assigned the Security Administrator role for the tenant.
You need the users to verify whether they still require the Security Administrator role.
What should you do?
- A. From Azure AD Privileged Identity Management, create a conditional access policy.
- B. From Azure AD Privileged Identity Management, create an access review.
- C. From Azure AD Identity Protection, configure a user risk policy.
- D. From Azure AD Identity Protection, configure the Weekly Digest.
正解：B
解説：
Explanation
References:
https://docs.microsoft.com/en-us/azure/active-directory/privileged-identity-management/pim-how-to-start-securi To reduce the risk associated with stale role assignments, you should regularly review access. You can use Azure AD Privileged Identity Management (PIM) to create access reviews for privileged Azure AD roles. You can also configure recurring access reviews that occur automatically.
Steps:
1. Sign in to Azure portal with a user that is a member of the Privileged role administrator role.
2. Open Azure AD Privileged Identity Management.
3. Select Azure AD roles.
4. Under Manage, select Access reviews, and then select New.
References:
https://docs.microsoft.com/en-us/azure/active-directory/privileged-identity-management/pim-how-to-start-securi
質問 # 288
You need to identify the storage requirements for Contoso.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
正解：
解説：
Explanation
Box 1: Yes
Contoso is moving the existing product blueprint files to Azure Blob storage.
Use unmanaged standard storage for the hard disks of the virtual machines. We use Page Blobs for these.
Box 2: No
Box 3: No
質問 # 289
Peering for VNET2 is configured as shown in the following exhibit.
Peering for VNET3 is configured as shown in the following exhibit.
How can packets be routed between the virtual networks? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
解説：
Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-peering-overview
質問 # 290
You have an Azure subscription that contains the Azure virtual machines shown in the following table.
You configure the network interfaces of the virtual machines to use the settings shown in the following table
From the settings of VNET1, you configure the DNS servers shown in the following exhibit.
The virtual machines can successfully connect to the DNS server that has an IP address of 192.168.10.15 and the DNS server that has an IP address of 193.77.134.10.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
正解：
解説：
Explanation
Box 1: Yes
You can specify DNS server IP addresses in the VNet settings. The setting is applied as the default DNS server(s) for all VMs in the VNet.
Box 2: No
You can set DNS servers per VM or cloud service to override the default network settings.
Box 3: Yes
You can set DNS servers per VM or cloud service to override the default network settings.
Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-networks-faq#name-resolution-dns
質問 # 291
......
Microsoft AZ-104 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
認定試験は、候補者のAzureサービスと機能の知識と理解を評価するために設計された多肢選択問題で構成されています。Azure仮想マシン、Azureストレージ、Azureネットワーキング、Azureセキュリティ、Azureアイデンティティとアクセス管理、Azureガバナンスなど、幅広いトピックをカバーしています。試験は、候補者が一般的なAzureの問題や問題をトラブルシューティングできる能力も検証します。
AZ-104問題集、あなたを合格させる認証試験：https://jp.fast2test.com/AZ-104-premium-file.html
まもなくセール終了！リアルAZ-104のPDF解答を使おう：https://drive.google.com/open?id=1813S1eYgZVZJiujymqjZefElXyjjdAAY