[2025年04月17日] 無料Dell Certification DC0-200公式認定ガイドPDFダウンロード
Dell DC0-200公式認定ガイドPDF
質問 # 21
Which keystroke is used to designate a single disk as a Hot Spare drive in the LSI Logic PERC controller?
- A. <F4>
- B. <F10>
- C. <Insert>
- D. <Space Bar>
正解：A
解説：
Explanation/Reference:
Explanation:
質問 # 22
You are configuring network teaming on a PowerEdge server. The server has Windows 2000 installed and you do not know what network adapters are in the system. Without physically opening the chassis, what are two ways to see which network adapters are installed using the operating system? (Choose two.)
- A. right-click My Computer, select Manage, left-click Device Manager, expand Network Adapters, and view installed adapters
- B. type ifconfig -a at a command prompt; on the description line, the manufacturer and device type will be named
- C. right-click Network Neighborhood, select Properties, double-click Internet Protocol (TCP/IP), and view protocol-bound adapters
- D. type ipconfig /all at the command prompt; on the description line, the manufacturer and device type will be named
正解：A、D
質問 # 23
Which three requirements must you meet to install OMSA in a Red Hat Linux environment? (Choose three.)
- A. You must purchase the Linux version of OMSA.
- B. The running kernel must have loadable module support enabled.
- C. You must do a custom installation to support Linux.
- D. The "ucd-snmp" or "net-snmp" package that is provided with the operating system must be installed.
- E. You must be logged in as root.
正解：B、D、E
解説：
Explanation/Reference:
Explanation:
質問 # 24
How would you install Red Hat Linux and Dell-validated drivers for your factory-installed hardware using the Dell Server Assistant CD?
- A. boot to the Dell Server Assistant CD after installing Red Hat Linux
- B. use the Dell Server Assistant CD to create a Utility Partition and launch the installation from the Utility Partition.
- C. autorun the CD from the GUI after Red Hat Linux is installed
- D. boot the Dell Server Assistant CD and have the Red Hat Linux CDs available
正解：D
質問 # 25
Which three statements are true for the OpenManage IT Assistant inventory page? (Choose three.)
- A. The inventory page is sortable by any column.
- B. The inventory page reports the status of a system.
- C. Inventory items in the inventory page for a discovered system are updated upon each discovery round.
- D. The inventory page supports printing to a printer.
- E. The number of columns that can be selected at any one time on the inventory page is limited to ten.
正解：A、C、D
質問 # 26
Which two components can be installed in the 0U space found in Dell racks? (Choose two)
- A. Dell UPS
- B. Dell PDU
- C. Dell Dual-Power Grid Switch
- D. Dell flat panel monitor
正解：B、C
解説：
Explanation/Reference:
Explanation:
質問 # 27
On most PowerEdge servers, the ESM is often updated with newer firmware. Which two devices are also updated by the ESM flash? (Choose two.)
- A. SCSI controller
- B. System Setup
- C. SCSI backplane
- D. Power Supply Paralleling Board
正解：C、D
解説：
Explanation/Reference:
Explanation:
質問 # 28
On most PowerEdge servers, the ESM is often updated with newer firmware. Which two devices are also updated by the ESM flash? (Choose two.)
- A. SCSI controller
- B. System Setup
- C. SCSI backplane
- D. Power Supply Paralleling Board
正解：C、D
質問 # 29
You want to install Windows 2000 Server and Dell-validated drivers for your factory-installed devices using the Dell Server Assistant CD. From which location should you launch the Dell Server Assistant?
- A. boot to the Dell Server Assistant CD and have your Windows CD available
- B. autorun the CD from the Windows desktop after installing Windows 2000
- C. use the Dell Server Assistant to create a Utility Partition and launch the installation from the Utility Partition
- D. boot to the Dell Server Assistant CD after installing Windows 2000
正解：A
解説：
Explanation/Reference:
Explanation:
質問 # 30
Which is the appropriate method to change or migrate from RAID-5 to RAID-0 using Array Manager with an Adaptec PERC?
- A. Switch RAID Type
- B. Reconfigure
- C. Rearrange Virtual Disk
- D. Rebuild Array
正解：B
解説：
Explanation/Reference:
Explanation:
質問 # 31
Which three tasks can be accomplished using the System Setup Utility of a Dell PowerEdge Server? (Choose three.)
- A. change the Asset Tag information
- B. enable the SCSI/RAID controller
- C. change the boot order
- D. enable or disable all integrated devices in the system
正解：B、C、D
質問 # 32
What happens when you specify a Preferred Primary Adapter in Windows 2000 for an AFT NIC team?
- A. You specify which adaptor will take the entire load. The other NICs will be used only when the Preferred Primary fails.
- B. You specify the desired card for all incoming traffic for the team. The other members will still transmit outgoing packets.
- C. You specify which adaptor will take the load until it is saturated, then the other members will start accepting packets until the Preferred Primary is just below the saturation point.
- D. You specify the desired card for all outgoing traffic for the team. The other members will still accept incoming packets.
正解：A
解説：
Explanation/Reference:
Explanation:
質問 # 33
If there is a loss of power redundancy on your PowerEdge server, in which three ways can Dell OpenManage IT Assistant report this? (Choose three.)
- A. An SNMP trap can be logged in the OpenManage IT Assistant.
- B. The status panel for that system indicates which power supply failed.
- C. Dell IT Assistant sends an alert to Dell OpenManage Server Administrator.
- D. Systems Status is marked as "Warning" in OpenManage IT Assistant.
正解：A、B、D
解説：
Explanation/Reference:
Explanation:
質問 # 34
Which two statements about the OMSA Update Service's function are true? (Choose two.)
- A. It lets you track BIOS and firmware updates through their record in the Command Log.
- B. It lets you view a current version report for BIOS, firmware, and OS.
- C. It provides a wizard to generate a batch script to update the BIOS.
- D. It lets you delete the Update History.
正解：A、B
質問 # 35
What are four valid event actions in ITA? (Choose four.)
- A. a page
- B. a forward event
- C. an alert popup
- D. a Windows event log insertion
- E. an e-mail message
正解：A、C、D、E
解説：
Explanation/Reference:
Explanation:
質問 # 36
You are configuring a new PowerEdge 2650 that is running Windows 2000 Server. The system will be in a rack without a keyboard or monitor connected, so you want to turn off keyboard error messages. What should you do?
- A. rack the system, as the system will autodetect rack use and disable keyboard error reporting
- B. disable the PS/2 port in Windows 2000 Device Manager and reboot
- C. boot to the Utility Partition, execute nokb.com before rebooting
- D. select the Do Not Report option for the Report Keyboard Errors field in the System Setup Utility
正解：D
解説：
Explanation/Reference:
Explanation:
質問 # 37
What are three types of NIC teaming? (Choose three.)
- A. Cluster Teaming
- B. Generic Trunking
- C. Load Balancing
- D. Fault Tolerance
正解：B、C、D
質問 # 38
What does virtual disk refer to, as used in Dell Array Manager?
- A. a block of storage accessed by a drive letter
- B. array disks or array disk segments presented to the OS as a single continuous block of storage space
- C. contains the physical view of storage entities such as controllers, channels, and array disks
- D. a single array disk in an array of disks
正解：B
解説：
Explanation/Reference:
Explanation:
質問 # 39
Which three requirements must you meet to install OMSA in a Red Hat Linux environment? (Choose three.)
- A. You must purchase the Linux version of OMSA.
- B. The running kernel must have loadable module support enabled.
- C. You must do a custom installation to support Linux.
- D. The "ucd-snmp" or "net-snmp" package that is provided with the operating system must be installed.
- E. You must be logged in as root.
正解：B、D、E
質問 # 40
What is required to enable a management application such as Dell OpenManage IT Assistant to receive SNMP traps from Dell OpenManage Server Agent/Server Administrator?
- A. You configure the SNMP service on the computer on which OpenManage IT Assistant is running (the management station) to the correct read community name so that it can read the traps correctly .
- B. Nothing needs to be done. OpenManage IT Assistant automatically registers to receive traps when it discovers the managed node on which Dell OpenManage Server Administrator is running.
- C. You make sure OpenManage IT Assistant has discovered the managed node running Dell OpenManage Server Administrator.
- D. You configure the SNMP service trap destinations on the computer on which Dell OpenManage Server Administrator is running to send traps to the management station (where OpenManage IT Assistant is running).
正解：D
質問 # 41
Which two must be included in the setup of SNMP to properly configure it? (Choose two.)
- A. Get All operations
- B. trap destination
- C. NetBEUI
- D. community name
正解：B、D
解説：
Explanation/Reference:
Explanation:
質問 # 42
You are monitoring 100 servers in your environment using ITA . You want to determine which servers are equipped with a remote access controller and the Array Manager agent, as well as view the physical memory of each server on one screen. How should you view this information from ITA?
- A. go to the ITA Logs tab, select the information you want to view, and click the Refresh button
- B. go to the ITA Remote Address Book, select the information you want to view, and click the Get Addresses button
- C. go to the ITA Inventory view, select the information you want to view, and click the Get Inventory button
- D. go to the ITA Search view, select all the information you want to view using one query, and click the Search button
正解：C
質問 # 43
Which visual clue alerts you that a virtual disk requires a signature to be written to it?
- A. A red dot with a minus sign appears on the virtual disk.
- B. A blue plus sign appears on the virtual disk.
- C. A green plus sign appears on the virtual disk.
- D. A yellow "bang" appears on the virtual disk.
正解：A
解説：
Explanation/Reference:
Explanation:
質問 # 44
......
Dell DC0-200 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
無料DC0-200試験問題集試験点数を伸ばそう：https://jp.fast2test.com/DC0-200-premium-file.html