試験高合格率保証2024年11月09日 DC0-200試験問題と正確な回答！
テストエンジン練習問題DC0-200有効最新の問題集
Dell DC0-200 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
質問 # 39
What type of security authentication scheme is used by OMSA under Windows 2000?
- A. NDS
- B. NTLM
- C. PAM
- D. SNMP
正解：B
解説：
Explanation/Reference:
Explanation:
質問 # 40
Which tool can be used to create a Utility Partition?
- A. Dell OpenManage Array Manager
- B. DOS fdisk Utility
- C. Dell Server Assistant CD
- D. Dell OpenManage IT Assistant CD
正解：C
質問 # 41
On most PowerEdge servers, the ESM is often updated with newer firmware. Which two devices are also updated by the ESM flash? (Choose two.)
- A. Power Supply Paralleling Board
- B. SCSI backplane
- C. System Setup
- D. SCSI controller
正解：A、B
解説：
Explanation/Reference:
Explanation:
質問 # 42
You are setting up a RAID using Dell Array Manager. What effect does selecting Express Mode have?
- A. It allows settings to be entered before array creation and then performs an unattended setup.
- B. It automatically creates an array and installs the operating system with no user input.
- C. It performs a quick format on all hard drives.
- D. It allows Array Manager to automatically select the RAID level and array size.
正解：D
質問 # 43
You are setting up a RAID using Dell Array Manager. What effect does selecting Express Mode have?
- A. It allows settings to be entered before array creation and then performs an unattended setup.
- B. It automatically creates an array and installs the operating system with no user input.
- C. It performs a quick format on all hard drives.
- D. It allows Array Manager to automatically select the RAID level and array size.
正解：D
解説：
Explanation/Reference:
Explanation:
質問 # 44
Which four steps are necessary for creating a team in Windows 2000 using BASP? (Choose four.)
- A. enter the path and filename of the configuration to be saved
- B. set the media type for the adapters
- C. create a team and assign it a name
- D. select the adapters from the list to add to the team
- E. configure the IP address and subnet mask for the team
- F. select the Broadcom Advanced Server Program Driver
正解：C、D、E、F
質問 # 45
You just added a new Dell PowerEdge server to the network. In order to use Dell OpenManage IT Assistant to manage it, which three steps do you need to take? (Choose three.)
- A. install Dell OpenManage Managed System applications on the new server
- B. install Dell OpenManage Management Station application on the new server
- C. ensure that the new server's IP address is in the discovery specified for OpenManage IT
Assistant - D. verify the SNMP settings of the new server
- E. install Dell OpenManage Remote Access Controller on the new server
正解：A、C、D
質問 # 46
Which three components make up the RAID enabler kit for ROMB servers? (Choose three.)
- A. cache memory
- B. RAID key
- C. cache battery
- D. RAID backplane
- E. RAID cable
正解：A、B、C
質問 # 47
What are four valid event actions in ITA? (Choose four.)
- A. an alert popup
- B. an e-mail message
- C. a forward event
- D. a page
- E. a Windows event log insertion
正解：A、B、D、E
質問 # 48
What is the purpose of the battery on a PERC?
- A. saves the cache contents during a power loss
- B. maintains the PERC BIOS settings
- C. preserves the hard drive configuration
- D. provides power to the PERC controller
正解：A
質問 # 49
Which two components can be installed in the 0U space found in Dell racks? (Choose two)
- A. Dell Dual-Power Grid Switch
- B. Dell UPS
- C. Dell PDU
- D. Dell flat panel monitor
正解：A、C
質問 # 50
What is the benefit of ECC memory?
- A. provides speed improvements by allowing addressing to be set for the next access to the same DIMM, while data are being read from the previous access
- B. provides redundancy by allowing defective memory to be disabled
- C. provides redundancy by maintaining parity info on the DRAM to detect and correct single bit errors
- D. provides speed improvements by accessing memory in parallel
正解：C
質問 # 51
You can use OMSA to remotely update the firmware for which two components? (Choose two.)
- A. Remote Access Controller firmware
- B. BIOS
- C. system software
- D. host bus adapter firmware
正解：A、B
質問 # 52
Which two are provided by riser boards? (Choose two.)
- A. processor mounting parallel to the system board in 2U, quad processor systems
- B. PCI slots parallel to the system board in 1U and 2U systems
- C. a place to connect up to 16 DIMMs in 4U and larger systems
- D. redundant power conditioning and distribution for power redundant systems
正解：B、C
質問 # 53
Which command line syntax assigns asset tag 12345 to a PowerEdge server using the Asset Tag Utility?
- A. asset /s 12345
- B. asset 12345
- C. asset /r 12345
- D. asset /d 12345
- E. asset /c 12345
正解：B
質問 # 54
If the server is operating normally, the Remote Access Controller allows an administrator to do which two tasks? (Choose two.)
- A. display storage information in a graphical environment
- B. perform an orderly shutdown of the server
- C. manage the server by redirecting the console output to a remote console
- D. create a utility partition
正解：B、C
質問 # 55
What happens when you specify a Preferred Primary Adapter in Windows 2000 for an AFT NIC team?
- A. You specify which adaptor will take the entire load. The other NICs will be used only when the Preferred Primary fails.
- B. You specify the desired card for all outgoing traffic for the team. The other members will still accept incoming packets.
- C. You specify the desired card for all incoming traffic for the team. The other members will still transmit outgoing packets.
- D. You specify which adaptor will take the load until it is saturated, then the other members will start accepting packets until the Preferred Primary is just below the saturation point.
正解：A
質問 # 56
In OpenManage Server Administrator, what does a red X indicate?
- A. The component is about to fail.
- B. The component has been removed.
- C. The component has a critical (failure) condition.
- D. The component has not been installed.
正解：C
質問 # 57
What are four valid event actions in ITA? (Choose four.)
- A. an alert popup
- B. an e-mail message
- C. a forward event
- D. a page
- E. a Windows event log insertion
正解：A、B、D、E
解説：
Explanation/Reference:
Explanation:
質問 # 58
Where in the Dell Server Assistant (DSA) interface can you erase all hard disks in preparation for a manual installation of a new OS?
- A. Resource Configuration Utility
- B. OS Install Preparation
- C. System Tools
- D. Wipe Clean
正解：C
質問 # 59
Which OpenManage component is installed on the managed system to allow SNMP alerts to be sent to the management station?
- A. Server Administrator
- B. Remote Access Controller
- C. Server Assistant
- D. IT Assistant
正解：A
解説：
Explanation/Reference:
Explanation:
質問 # 60
The drive that contains the user home folders is running out of space. This partition is labeled D and is a part of a three disk RAID 5 labeled Virtual Disk 2. Yo u want to increase the size of the partition by adding an additional hard drive to the virtual disk. How can you do this when a PERC 3/Di is used?
- A. You back up the virtual disk. Array Manager is used to expand the virtual disk onto an additional hard drive.
- B. You back up Virtual Disk 2. Array Manager is used to delete Virtual Disk 2 and recreate it including the additional hard disk. You re-create the D partition and restore its contents from tape.
- C. Array Manager is used to expand the virtual disk onto an additional hard drive.
- D. You use Array Manager to delete Virtual Disk 2 and re-create it including the additional hard disk. You restore the contents of the original virtual disk from the RAID 5 parity.
正解：B
質問 # 61
Which keystroke is used to designate a single disk as a Hot Spare drive in the LSI Logic PERC controller?
- A. <Insert>
- B. <Space Bar>
- C. <F10>
- D. <F4>
正解：D
解説：
Explanation/Reference:
Explanation:
質問 # 62
In OpenManage Server Administrator, what does a red X indicate?
- A. The component is about to fail.
- B. The component has been removed.
- C. The component has a critical (failure) condition.
- D. The component has not been installed.
正解：C
解説：
Explanation/Reference:
Explanation:
質問 # 63
......
試験解答DC0-200最新版とテストエンジン：https://jp.fast2test.com/DC0-200-premium-file.html