[2025年04月] 無料FCP_FAZ_AD-7.4試験問題集試験点数を伸ばそう
2025年最新のFCP_FAZ_AD-7.4実際問題集には試験のコツがあるPDF試験材料
Fortinet FCP_FAZ_AD-7.4 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
質問 # 17
What is the purpose of a predefined template on the FortiAnalyzer?
- A. It contains predefined data to generate mock reports
- B. It can be edited and modified as required
- C. It specifies report settings which contains time period, device selection, and schedule
- D. It specifies the report layout which contains predefined texts, charts, and macros
正解：D
解説：
Reference:
2300_Reports/0010_Predefined_reports.htm#:~:text=FortiAnalyzer%20includes%20a%20number%
20of,create%20and%2For%20build%20reports.&text=A%20template%20populates%20the%20Layout,that%
20is%20to%20be%20created.
https://help.fortinet.com/fa/faz50hlp/56/5-6-2/FMG-FAZ/2300_Reports/0010_Predefined_reports.htm
質問 # 18
What must you configure on FortiAnalyzer to upload a FortiAnalyzer report to a supported external server?
(Choose two.)
- A. Output profile
- B. Report scheduling
- C. Mail server
- D. SFTP, FTP, or SCP server
正解：A、D
解説：
https://docs.fortinet.com/document/fortianalyzer/6.0.2/administration-guide/598322/creating-output-profiles
質問 # 19
Refer to the exhibit, which shows the HA configuration settings of a FortiAnalyzer device.
The administrator wants to join this FortiAnalyzer to an existing HA cluster. What can you conclude from the configuration displayed?
- A. This FortiAnalyzer will trigger a failover after losing communication with its peers for 10 seconds.
- B. This FortiAnalyzer is configured to route HA traffic through a gateway.
- C. After joining the cluster, this FortiAnalyzer will forward received logs to its peers.
- D. This FortiAnalyzer will join the existing HA cluster as the secondary.
正解：A
解説：
The "Preferred Role" is set to Secondary, which means this FortiAnalyzer is configured to join the cluster as the secondary unit in an Active-Passive HA configuration. Other settings, such as the peer IP and serial number, confirm its setup to communicate with the primary unit.
質問 # 20
What is the purpose of employing RAID with FortiAnalyzer?
- A. To separate analytical and archive data
- B. To provide data separation between ADOMs
- C. To introduce redundancy to your log data
- D. To back up your logs
正解：C
解説：
https://en.wikipedia.org/wiki/RAID#:~:text=RAID%20(%22Redundant%20Array%20of%20Inexpensive,%2C%20performance%20improvement%2C%20or%20both.
質問 # 21
You are trying to initiate an authorization request from FortiGate to FortiAnalyzer, but the Security Fabric window does not open when you click Authorize.
Which two reasons can cause this to happen? (Choose two.)
- A. The fabric authorization settings on FortiAnalyzer are misconfigured.
- B. A pre-shared key needs to be established on both sides.
- C. The management computer does not have connectivity to the authorization IP address and port combination.
- D. The Security Fabric root is unauthorized and needs to be added as a trusted host.
正解：A、C
解説：
The management computer does not have connectivity to the authorization IP address and port combination.
If there is no network connectivity between the management computer and the FortiAnalyzer on the specific IP address and port used for authorization, the Security Fabric window will not open.
The fabric authorization settings on FortiAnalyzer are misconfigured.
If the fabric authorization settings on FortiAnalyzer are not properly configured, FortiGate will not be able to initiate the authorization request, preventing the Security Fabric window from opening.
The other options are not applicable because:
Pre-shared keys are not required for initial authorization between FortiGate and FortiAnalyzer; they are typically used for establishing VPN tunnels.
The Security Fabric root does not need to be added as a trusted host to open the authorization window. Trusted hosts are more relevant to FortiGate's access control for management interfaces.
質問 # 22
Which statement is true about sending notifications with incident updates?
- A. If you use multiple fabric connectors, all connectors must have the same notification settings
- B. Notifications can be sent only when an incident is updated or deleted.
- C. Notifications can be sent only by email.
- D. You can send notifications to multiple external platforms
正解：D
解説：
You can add more than one fabric connector, each with the same or different notification settings. The receiving side of the connector must be configured for the notifications to be sent successfully.
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 34: Fabric connectors also enable FortiAnalyzer to send notifications to ITSM platforms when a new incident is created or for any subsequent updates.
質問 # 23
Which statement correctly describes RAID 10 (1+0) on FortiAnalyzer?
- A. A configuration with four disks, each with 2 TB of capacity, provides a total space of 4 TB.
- B. 11 combines mirroring striping and distributed parity to provide performance and fault tolerance
- C. It uses striping to provide performance and fault tolerance.
- D. A configuration with four disks, each with 2 TB of capacity, provides a total space of 2 TB.
正解：A
解説：
RAID 10 combines mirroring (RAID 1) and striping (RAID 0). In a RAID 10 setup with four disks, data is mirrored across two pairs of disks, and those pairs are striped for performance. This results in improved performance and fault tolerance, but the total usable storage is 50% of the total raw storage, meaning four 2 TB disks provide 4 TB of usable space.
質問 # 24
What are analytics logs on FortiAnalyzer?
- A. Logs that roll over when the log file reaches a specific size.
- B. Logs that are indexed and stored in the SQL.
- C. Log type Traffic logs.
- D. Raw logs that are compressed and saved to a log file.
正解：B
質問 # 25
Refer to the exhibit.
What is the purpose of using the Chart Builder feature on FortiAnalyzer?
- A. This feature allows you to build a chart under FortiView.
- B. In Log View, this feature allows you to build a chart and chart automatically, on the top 100 log entries.
- C. You can add charts to generated reports using this feature.
- D. In Log View, this feature allows you to build a dataset and chart automatically, based on the filtered search results.
正解：D
質問 # 26
An administrator, fortinet, can view logs and perform device management tasks, such as adding and removing registered devices. However, administrator fortinet is not able to create a mail server that can be used to send alert emails.
What can be the problem?
- A. fortinet is assigned the default Standard_User administrative profile.
- B. fortinet is assigned the default Restricted_User administrative profile.
- C. A trusted host is configured.
- D. ADOM mode is configured with Advanced mode.
正解：A
解説：
The Standard_User profile allows viewing logs and performing some device management tasks but typically does not allow configuring global settings like creating a mail server for alert emails. To create a mail server, the administrator would need to have a profile with higher privileges, such as Super_User or a custom profile with the necessary permissions.
質問 # 27
Which two of the available registration methods place the device automatically in its assigned ADOM?
(Choose two.)
- A. Pre-shared key
- B. Serial number
- C. Fabric Authorization
- D. Request from the device
正解：B、C
解説：
Request from the device - When a device such as a FortiGate requests registration from its interface directly to FortiAnalyzer, this method can be configured to automatically assign the device to a specific ADOM based on predefined criteria or configurations. This is especially useful in large deployments where devices are pre-configured with their respective ADOM details.
Fabric Authorization - This method involves using the Security Fabric connectivity to authenticate and register devices within FortiAnalyzer. With Fabric Authorization, devices are automatically recognized and can be assigned to their respective ADOMs based on their roles and positions within the security fabric. This allows for seamless integration and management of devices across a complex network.
質問 # 28
Which SQL query is in the correct order to query the database in the FortiAnslyzer?
- A. SELECT devid WHERE 'u3er'='USERl' FROM $ log GROUP BY devid
- B. SELECT devid FROM Slog GROOP BY devid WHERE * user' =* USERl'
- C. FROM Slog WHERE 'user* =' USERl' SELECT devid GROUP BY devid
- D. SELECT devid FROM Slog- WHERE *user' =' USERl' GROUP BY devid
正解：D
解説：
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 259: The main clauses FortiAnalyzer reports use are as follows:
* FROM
* WHERE
* GROUP BY
* ORDER BY
* LIMIT
* OFFSET
Accordingly, following the SELECT keyword, the statement must be followed by one or more clauses in the order in which they appear in the table shown on this slide.
質問 # 29
Why run the command diagnose sql status sqlplugind?
- A. To check what is the database log insertion status
- B. To view the current hcache size
- C. To list the current SQL processes running
- D. To display the SOL query connections and hcache status
正解：B
質問 # 30
On the RAID management page, the disk status is listed as Initializing.
What does the status Initializing indicate about what the FortiAnalyzer is currently doing?
- A. FortiAnalyzer is writing data to a newly added hard drive to restore it to an optimal state
- B. FortiAnalyzer is functioning normally
- C. FortiAnalyzer is writing to all of its hard drives to make the array fault tolerant
- D. FortiAnalyzer is ensuring that the parity data of a redundant drive is valid
正解：C
解説：
Reference:
8977-00505692583a/FortiAnalyzer-5.6.10-Administration-Guide.pdf (40)
質問 # 31
You need to upgrade your FortiAnalyzer firmware.
What happens to the logs being sent to FortiAnalyzer from FortiGate during the time FortiAnalyzer is temporarily unavailable?
- A. FortiAnalyzer uses log fetching to retrieve the logs when back online
- B. The logfiled process stores logs in offline mode
- C. Logs are dropped
- D. FortiGate uses the miglogd process to cache the logs
正解：D
質問 # 32
......
心強いFCP_FAZ_AD-7.4のPDF問題集はFCP_FAZ_AD-7.4問題：https://jp.fast2test.com/FCP_FAZ_AD-7.4-premium-file.html
正真正銘のFCP_FAZ_AD-7.4問題集で無料PDF問題で合格させる：https://drive.google.com/open?id=1vsuZtsEl2oZPW6v4mYUdnbCu80yhWXlq