更新済みの2025年04月 FCP_FAZ_AD-7.4試験練習テスト問題 [Q77-Q95]

更新済みの2025年04月 FCP_FAZ_AD-7.4試験練習テスト問題

検証済みFCP_FAZ_AD-7.4問題集と解答100%一発合格保証で更新された問題集

質問 # 77
What statements are true regarding disk log quota? (Choose two)

• A. The FortiAnalyzer automatically sets the disk log quota based on the device.
• B. The FortiAnalyzer can overwrite the oldest logs or stop logging once the disk log quota is met.
• C. The FortiAnalyzer stops logging once the disk log quota is met.
• D. The FortiAnalyzer disk log quota is configurable, but has a minimum o 100mb a maximum based on the reserved system space.

正解：B、D

質問 # 78
In a Fortinet Security Fabric, what can make an upstream FortiGate create traffic logs associated with sessions initiated on downstream FortiGate devices?

• A. The traffic destination is another FoitiGate in the fabric.
• B. Log redundancy is configured in the fabric.
• C. The upstream FortiGate is configured to do NAT.
• D. The downstream device cannot connect to FortiAnalyzer.

正解：D

解説：
In the Fortinet secure fabric, the scenario for having the upstream FortiGate create a traffic log associated with a session initiated on the downstream FortiGate appliance is: The upstream FortiGate is configured with Network Address Translation (NAT).
When the upstream FortiGate performs NAT for sessions initiated on downstream devices, it creates logs for those NAT-processed sessions. This is because the upstream device is responsible for providing public network egress for these sessions and logging traffic information.

質問 # 79
What is the best approach to handle a hard disk failure on a FortiAnalyzer that supports hardware RAID?

• A. Run execute format disk to format and restart the FortiAnalyzer device.
• B. Perform a hot swap of the disk.
• C. Shul down FortiAnalyzer and replace the disk.
• D. There is no need to do anything because the disk will self-recover.

正解：B

解説：
In systems that support hardware RAID, hot swapping allows for the replacement of a failed disk without shutting down the system. This capability is crucial for maintaining uptime and ensuring data redundancy and availability, especially in critical environments. The RAID controller rebuilds the data on the new disk using redundancy data from the other disks in the array, ensuring no data loss and minimal impact on system performance.
In the context of a FortiAnalyzer unit equipped with hardware RAID support, the optimal approach to addressing a hard disk failure is to perform a hot swap of the disk. Hardware RAID configurations are designed to provide redundancy and fault tolerance, allowing for the replacement of a failed disk without the need to shut down the system. Hot swapping enables the administrator to replace the faulty disk with a new one while the system is still running, and the RAID controller will rebuild the data on the new disk, restoring the RAID array to its fully operational state.
Reference: FortiAnalyzer 7.2 Administrator Guide - "Hardware Maintenance" and "RAID Management" sections.

質問 # 80
Refer to the exhibits.


How many events will be added to the incident created after running this playbook?

• A. No events will be added.
• B. Thirteen events will be added.
• C. Ten events will be added.
• D. Five events will be added.

正解：B

質問 # 81
For which two SAML roles can the FortiAnalyzer be configured? (Choose two.)

• A. Identity collector
• B. Identity provider
• C. Principal
• D. Service provider

正解：B、D

解説：
Reference:
20the%20identity%20provider%20(IdP,external%20identity%20provider%20is%20available.
https://docs.fortinet.com/document/fortianalyzer/6.2.0/administration-guide/981386/saml-admin-authentication In FortiAnalyzer, SAML can be enabled across all Security Fabric devices, enabling smooth movement between devices for the administrator by means of single sign-on (SSO).
FortiAnalyzer can play the role of the identity provider (IdP), the service provider (SP), or Fabric SP, when an external identity provider is available.
FortiAnalyzer_7.0_Study_Guide-Online pag. 48

質問 # 82
When you perform a system backup, what does the backup configuration contain? (Choose two.)

• A. Authorized devices logs
• B. Generated reports
• C. Device list
• D. System information

正解：C、D

解説：
https://help.fortinet.com/fa/cli-olh/5-6-5/Content/Document/1400_execute/backup.htm

質問 # 83
Which three RAID configurations provide fault tolerance on FortiAnalyzer? (Choose three.)

• A. RAID 0+0
• B. RAID 5
• C. RAID 6+0
• D. RAIDO
• E. RAID1

正解：B、C、E

解説：
RAID 1 provides fault tolerance through disk mirroring.
RAID 5 provides fault tolerance by using distributed parity across multiple disks.
RAID 6+0 combines striping with double parity, offering enhanced fault tolerance.
RAID 0 and RAID 0+0 do not provide any fault tolerance, as they focus on performance through data striping but offer no redundancy.

質問 # 84
What are analytics logs on FortiAnalyzer?

• A. Log type Traffic logs.
• B. Raw logs that are compressed and saved to a log file.
• C. Logs that are indexed and stored in the SQL.
• D. Logs that roll over when the log file reaches a specific size.

正解：C

質問 # 85
Refer to the exhibit.

Based on the partial outputs displayed in the exhibit, which devices are ready to be configured as peers in an HA cluster?

• A. FortiAnalyzer1 and FortiAnalyzer3
• B. FortiAnalyzer2 and FortiAnalyzer3
• C. FortiAnalyzer1 and FortiAnalyzer2
• D. These devices cannot participate in the same cluster.

正解：D

解説：
Based on the provided exhibit, which shows partial outputs of the system status and global settings for FortiAnalyzer devices, the devices cannot be configured as peers in an HA (High Availability) cluster.
This is indicated by the HA Mode status being set to 'Stand Alone' for the displayed FortiAnalyzer device.
For devices to be part of an HA cluster, they would need to have compatible HA configurations, and usually, they should not be in 'Stand Alone' mode. Additionally, the exhibit only shows information for one FortiAnalyzer, so it cannot be determined if there is another device ready to form an HA cluster with it.

質問 # 86
Which two constraints can impact the amount of reserved disk space required by FortiAnalyzer? (Choose two.)

• A. License type
• B. Total quota
• C. RAID level
• D. Disk size

正解：C、D

解説：
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/368682/disk-space-allocation

質問 # 87
An administrator has configured the following settings:

What is the purpose of executing these commands?

• A. To create the secure channel used by the OFTP process.
• B. To encrypt log transfer between FortiAnalyzer and other devices.
• C. To record the hash value and authentication code of log files.
• D. To verify the integrity of the log files received.

正解：C

解説：
The command set log-checksum md5-auth configures FortiAnalyzer to generate an MD5 hash for each log file, along with an authentication code. This ensures that the integrity of the logs can be verified, confirming that the logs have not been tampered with.

質問 # 88
Why should you use an NTP server on FortiAnalyzer and all registered devices that log into FortiAnalyzer?

• A. To properly correlate logs
• B. To improve DNS response times
• C. To use real-time forwarding
• D. To resolve host names

正解：A

質問 # 89
Which command can you use to find the IP addresses of the devices sending logs to FortiAnalyzer?

• A. diagnose teat application miglogd 6
• B. diagnose debug application oftpd 8
• C. diagnose dvm adorn List
• D. diagnose best application oftpd 3

正解：B

解説：
diagnose debug application oftpd 8 - This command is used for debugging OFTP (Open File Transfer Protocol), which is related to log transfer processes in FortiAnalyzer. The level "8" in this command suggests very detailed and verbose output, which can include IP addresses but might also include extensive additional data, which could be overwhelming and not specifically targeted to simply finding IP addresses.
diagnose debug application oftpd 3 - Similar to option A, this command also debugs the OFTP process but at a debug level of "3", which typically provides more focused and concise output compared to level "8".
This can be useful for viewing connection-related information, including which devices are connecting and their IP addresses.
Based on this understanding, the most appropriate command to use for finding the IP addresses of devices sending logs to FortiAnalyzer, especially if you're looking for a clear and not overly verbose output, would be: D. diagnose debug application oftpd 3 This command will provide the necessary debugging information about the log transmission protocol, likely including the IP addresses of the devices involved in log sending, making it a suitable choice for this specific query.

質問 # 90
FortiAnalyzer uses the Optimized Fabric Transfer Protocok (OFTP) over SSL for what purpose?

• A. To send an identical set of logs to a second logging server
• B. To prevent log modification during backup
• C. To upload logs to an SFTP server
• D. To encrypt log communication between devices

正解：D

質問 # 91
Which statements are correct regarding FortiAnalyzer reports? (Choose two)

• A. FortiAnalyzer includes pre-defined reports only.
• B. FortiAnalyzer glows you to schedule reports to run.
• C. FortiAnalyzer provides the ability to create custom reports.
• D. FortiAnalyzer allows reporting for FortiGate devices only.

正解：B、C

質問 # 92
What is the best approach to handle a hard disk failure on a FortiAnalyzer that supports hardware RAID?

• A. Shut down FortiAnalyzer and replace the disk.
• B. Run execute format disk to format and restart the FortiAnalyzer device.
• C. Perform a hot swap of the disk.
• D. There is no need to do anything because the disk will self-recover.

正解：C

解説：
In a RAID configuration, especially when hot-swapping is supported, you can replace a failed disk without shutting down the device. The RAID array will automatically rebuild once the new disk is inserted, minimizing downtime and maintaining data integrity.

質問 # 93
Which clause is considered mandatory in SELECT statements used by the FortiAnalyzer to generate reports?

• A. ORDER BY
• B. FROM
• C. LIMIT
• D. WHERE

正解：B

質問 # 94
Which two elements are contained in a system backup created on FortiAnalyzer? (Choose two.)

• A. Database snapshot
• B. System information
• C. Logs from registered devices
• D. Report information

正解：B、D

解説：
A FortiAnalyzer system backup includes configurations, report settings, and system information, but it does not include logs from registered devices or database snapshots. Logs are stored separately and are not part of the system configuration backup.

質問 # 95
......

Fortinet FCP_FAZ_AD-7.4 認定試験の出題範囲：

トピック	出題範囲
トピック 1	Logs and Reports Management: This part of the exam measures the candidate's ability to handle log data and generate reports using FortiAnalyzer. Network and security analysts must show proficiency in managing, analyzing, and reviewing logs to ensure effective system monitoring and auditing processes are in place.
トピック 2	System Configuration: This section assesses the capabilities of network and security analysts in managing FortiAnalyzer systems. It includes tasks like performing initial configurations, setting up high-availability systems, and configuring RAID for storage.
トピック 3	Administration: This section evaluates the ability of network and security analysts to configure administrative access and manage Administrative Domains (ADOMs). It covers tasks such as setting user permissions, managing backups, and disk quotas, and ensuring secure and efficient management of administrative privileges within FortiAnalyzer systems.
トピック 4	Device Management: Here, Fortinet network and security analysts are evaluated on their ability to handle devices linked to FortiAnalyzer. This includes adding new devices, managing them efficiently, and troubleshooting communication issues.

 

究極の準備用無料ガイドFCP_FAZ_AD-7.4試験問題と解答：https://drive.google.com/open?id=1vsuZtsEl2oZPW6v4mYUdnbCu80yhWXlq

合格できるFortinet Network Security Expert FCP_FAZ_AD-7.4試験問題集には173問があります：https://jp.fast2test.com/FCP_FAZ_AD-7.4-premium-file.html