2025年最新の有効なFCSS_NST_SE-7.4リアル試験問題（更新された）100%問題集と練習試験合格させます
[更新されたのは2025年]Fortinet FCSS_NST_SE-7.4問題準備には無料サンプルのPDF
Fortinet FCSS_NST_SE-7.4 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
質問 # 32
Refer to the exhibit, which shows the output of get router info bgp summary.
Which two statements are true? (Choose two.)
- A. The local FortiGate has received 18 packets from a BGP neighbor.
- B. The local ForliGate has received one prefix from BGP neighbor 100.64.1.254.
- C. The local FortiGate is still calculating the prefixes received from BGP neighbor 100.64.2.264
- D. The TCP connection with BGP neighbor 100.64.2.254 was successful.
正解：A、B
質問 # 33
Exhibit.
Refer to the exhibit, which shows the output of a session. Which two statements are true? (Choose Iwo.)
- A. The session is being inspected using flow inspection.
- B. The session is being offloaded.
- C. The session was initiated from an authenticated user.
- D. The TCP session has been successfully established.
正解：C、D
質問 # 34
Refer to the exhibit, which shows the output of get router info bgp summary.
Which two statements are true? (Choose two.)
- A. The local FortiGate has received 18 packets from a BGP neighbor.
- B. The local ForliGate has received one prefix from BGP neighbor 100.64.1.254.
- C. The local FortiGate is still calculating the prefixes received from BGP neighbor 100.64.2.264
- D. The TCP connection with BGP neighbor 100.64.2.254 was successful.
正解：A、B
質問 # 35
Which two statements are true regarding heartbeat messages sent from an FSSO collector agent to FortiGate? (Choose two.)
- A. The heartbeat messages can be seen on FortiGate using the real-lime FSSO debug.
- B. The heartbeat messages can be seen in the collector agent logs.
- C. The heartbeat messages must be manually enabled on FortiGate.
- D. The heartbeat messages can be seen using the command diagnose debug authd fsso list.
正解：A、B
質問 # 36
Exhibit.
Refer to the exhibit, which contains partial output from an IKE real-time debug.
Which two statements about this debug output are correct? (Choose two.)
- A. The local gateway IP address is 10.0.0.1.
- B. The initiator provided remote as its IPsec peer ID.
- C. Perfect Forward Secrecy (PFS) is enabled in the configuration.
- D. It shows a phase 2 negotiation.
正解：B、D
質問 # 37
Exhibit.
Refer to the exhibit, which contains a screenshot of some phase 1 settings.
The VPN is not up. To diagnose the issue, the administrator enters the following CLI commands on an SSH session on FortiGate:
However, the IKE real-time debug does not show any output. Why?
- A. The log-filter setting is incorrect. The VPN traffic does not match this filter.
- B. The debug shows only error messages. If there is no output, then the phase 1 and phase 2 configurations match.
- C. The administrator must also run the command diagnose debug enable.
- D. Replace diagnose debug application ike -1 with diagnose debug application ipsec -1.
正解：C
質問 # 38
Refer to the exhibit, which shows a truncated output of a real-time LDAP debug.
What two conclusions can you draw from the output? (Choose two.)
- A. FortiOS is performing the second step (Search Request) in the LDAP authentication process.
- B. The name of the configured LDAP server is Lab.
- C. The user is authenticating using CN=John Smith.
- D. FortiOS is able to locate the user in step 3 (Bind Request) of the LDAP authentication process.
正解：A、C
質問 # 39
Refer to the exhibit, which shows the output of a policy route table entry.
Which type of policy route does the output show?
- A. AnSD-WAN rule
- B. A regular policy route, which is associated with an active static route in the FIB
- C. A regular policy route
- D. An ISDB route
正解：D
質問 # 40
Exhibit.
Refer to the exhibit, which shows the output of a diagnose command.
What can you conclude about the debug output in this scenario?
- A. The first server provided to FortiGate when it performed a DNS query looking for a list of rating servers, was 121.111.236.179.
- B. FortiGate used 64.26.151.37 as the initial server to validate its contract.
- C. Servers with a negative TZ value are less preferred for rating requests.
- D. There is a natural correlation between the value in the FortiGuard-requests field and the value in the Weight field.
正解：D
質問 # 41
Refer to the exhibit, which shows the output of get router info ospf neighbor.
What can you conclude from the command output?
- A. The network type connecting the local Fortigate and OSPF neighbor 0.0.0.10 is point-to-point.
- B. The local FortiGate is not a DROther.
- C. The local FortiGate is the BDR.
- D. All neighbors are in area 0.0.0.0.
正解：A
質問 # 42
Refer to the exhibit, which shows the partial output of FortiOS kernel slabs.
Which statement is true?
- A. The total slab size of the ip6_session slab is 1300 kB and is associated with the kernel.
- B. The total slab size of the ip_session slab is 3600 kB and is associated with the user space.
- C. The total slab size of the tcp_session slab is 7500 kB and is associated with the kernel.
- D. The total slab size of the sctp_session slab is 0 kB and is associated with the user space.
正解：C
質問 # 43
Refer to the exhibits, which contain the partial configurations of two VPNs on FortiGate.
An administrator has configured two VPNs for two different user groups. Users who are in the Users-2 group are not able to connect to the VPN. After running a diagnostics command, the administrator discovers that FortiGate is not matching the user-2 VPN for members of the Users-2 group.
Which two changes must the administrator make to fix the issue? (Choose two.)
- A. Set up specific peer IDs on both VPNs.
- B. Use different pre-shared keys on both VPNs.
- C. Change to aggressive mode on both VPNs.
- D. Enable XAuth on both VPNs.
正解：A、C
質問 # 44
Exhibit 1.
Exhibit 2.
Refer to the exhibits, which show the configuration on FortiGate and partial internet session information from a user on the internal network.
An administrator would like to lest session failover between the two service provider connections.
Which two changes must the administrator make to force this existing session to immediately start using the other interface? (Choose two.)
- A. Configure set snat-route-change enable.
- B. Configure unset snat-route-change to return it to the default setting.
- C. Change the priority of the port! static route to 11.
- D. Change the priority of the port2 static route to 5.
正解：A、C
質問 # 45
Exhibit.
Refer to the exhibit, which shows a partial output of diagnose hardware aysinfo memory.
Which two statements about the output are true? (Choose two.)
- A. The I/O cache, which has 641364 kB of memory allocated to it.
- B. The user space has 708880 kB of physical memory that is not used by the system.
- C. The value indicated next to the inactive heading represents the currently unused cache page.
- D. There are 98908 kB o! memory that will never be used.
正解：C、D
質問 # 46
Refer to the exhibit, which shows the output of a BGP debug command.
Whatcan you conclude about the router in this scenario?
- A. The BGP session with peer 10.127.0.75 is up.
- B. All of the neighbors displayed are part of a single BGP configuration on the local router with the neighbor-range set to a value of 4.
- C. The router 100.64.3.1 needs to update the local AS number in its BGP configuration in order to bring up the 8GP session with the local router.
- D. An inbound route-map on local router is blocking the prefixes from neighbor 100.64.3.1.
正解：A
質問 # 47
Exhibit.
Refer to the exhibit, which contains a screenshot of some phase 1 settings.
The VPN is not up. To diagnose the issue, the administrator enters the following CLI commands on an SSH session on FortiGate:
However, the IKE real-time debug does not show any output. Why?
- A. The log-filter setting is incorrect. The VPN traffic does not match this filter.
- B. The debug shows only error messages. If there is no output, then the phase 1 and phase 2 configurations match.
- C. The administrator must also run the command diagnose debug enable.
- D. Replace diagnose debug application ike -1 with diagnose debug application ipsec -1.
正解：C
質問 # 48
......
FCSS_NST_SE-7.4豪華セット学習ガイドにはオンライン試験エンジン：https://jp.fast2test.com/FCSS_NST_SE-7.4-premium-file.html
2025年最新の認定サンプル問題FCSS_NST_SE-7.4問題集と練習試験：https://drive.google.com/open?id=1WT-fH18ASYdWsWMvX0VyfFtRvDTa-rgK