[2025年更新]合格できる010-151試験にはリアルな問題解答
010-151試験問題ゲット最新[2025]と正解回答
質問 # 95
Refer to the exhibit.
What is the name of this rack-mount server?
- A. Cisco UCS C460 Rack-Mount Server
- B. Cisco UCS C240 Rack-Mount Server
- C. Cisco UCS C420 Rack-Mount Server
- D. Cisco UCS C220 Rack-Mount Server
正解：C
質問 # 96
Refer to the exhibit.
Where is the best place to see whether the system is ready for a Fabric Interconnect failover?
- A. A - Overall Status operable
- B. B - L1 Connection
- C. E - High Availability Details
- D. D - Access
- E. C - Part Details
正解：C
解説：
Explanation
質問 # 97
Which important feature on the front end is provided to the clients by multiple servers that access the same storage devices across the SAN?
- A. redundancy
- B. storage
- C. security
- D. recovery
- E. resiliency
正解：A
質問 # 98
What is the name of the process to automatically upgrade a new Fabric Interconnect when it is connected to the functioning Fabric Interconnect?
- A. Auto-Negotiate Process
- B. Firmware Update Process
- C. Auto-Sync Process
- D. Firmware Policy Process
正解：B
質問 # 99
Refer to the exhibit.
Which Cisco MDS chassis supports the 48-Port 16-Gbps Fibre Channel Switching Module?
- A. MDS 9506
- B. MDS 9710
- C. MDS 9509
- D. MDS 9513
正解：B
解説：
Topic 4, Service related Knowledge
質問 # 100
What are two functions of system controllers in the Cisco Nexus 9500 Series? (Choose two.)
- A. They control the Layer 2 and Layer 3 services.
- B. They are used to offload the internal non-data-path switching and management functions from the supervisor engines.
- C. The Cisco Nexus 9500 Series switch software, Enhanced NX-OS, runs on the system controllers.
- D. The Cisco Nexus 9500 Series supports redundant system controllers.
- E. They provide centralized arbitration to the system fabric for all line cards.
正解：B、D
質問 # 101
Which two statements are true about the Cisco UCS C4200 Rack server and UCS C125 M5 compute node?
(Choose two.)
- A. Optional dual USB ports for increased storage or boot drive capacity
- B. 2666-MHz DDR4 memory and 24 DIMM slots for up to 3 TB of total memory
- C. AMD EPYC 7000 series processors, with up to 32 cores per socket
- D. 8 NVIDIA SXM2 V100 32G modules with NVLink interconnect
- E. Over 45 TB of storage, with up to six small-form-factor 2.5-inch direct-attached drives per node
正解：A、E
質問 # 102
Refer to the diagram, match the following Ethernet frame fields.
正解：
解説：
質問 # 103
Which three tools are necessary to console into a Cisco UCS C-Series Rack-Mount Server? (Choose three.)
- A. monitor
- B. Cisco DB-9-to-RJ-45 console cable
- C. USB serial adapter
- D. laptop
- E. KVM dongle
- F. keyboard
正解：A、E、F
質問 # 104
Refer to the exhibit.
Which statement correctly identifies the front panel LEDs on the Cisco UCS C220 Server?
- A. A is network link activity LED; B is system status LED; C is identification button and LED; D is power button and power status LED.
- B. A is system status LED; B is network link activity LED; C is power button and power status LED; D is identification button and LED.
- C. A is power button and power status LED; B is identification button and LED; C is system status LED; D is network link activity LED.
- D. A is network link activity LED; B is system status LED; C is power button and power status LED; D is identification button and LED.
正解：C
質問 # 105
To do a password recovery on a Cisco NX-OS Switch, which option shows the correct syntax to display the bootflash contents at the switch(boot)#?
- A. show bootflash:
- B. find bootflash:
- C. display bootflash:
- D. dir bootflash:
正解：D
質問 # 106
Which two commands allow you to view the state of high availability between the two clustered Fabric Interconnects? (Choose two.)
- A. show cluster HA status
- B. show cluster extended-state
- C. show cluster state extended
- D. show cluster state
正解：B、D
質問 # 107
Refer to the exhibit.
Which item does B represent?
- A. PCle Riser 1
- B. mLOM
- C. Power Supply
- D. PCle Riser 2
- E. Rear 2.5-inch drive bays
正解：D
質問 # 108
How does RAID function?
- A. RAID is a scheme used to logically combine several independent disks to form an array or group of drives.
- B. RAID drive group appears to the host computer as multiple physical storage units.
- C. RAID parity information can be stored across multiple RAID levels.
- D. RAID provides data redundancy with either odd parity or even parity.
正解：A
質問 # 109
What is the command to provide details pertaining to the state of the cluster?
- A. Show extended cluster state
- B. Show cluster state
- C. Show cluster
- D. Show cluster extended-state
正解：D
質問 # 110
Which two statements are true for the Ethernet 802.3 standard? (Choose two.)
- A. Network layer protocol is carried in the payload field.
- B. CSMA/CD eliminates collisions for the switched LAN where multiple collision domains reside.
- C. The IEEE 802.3ab standard defines 10 Gigabit Ethernet over unshielded twisted-pair (UTP).
- D. It defines physical layer and data link layer protocols.
- E. An 802.3 Ethernet frame is 68 to 1518 bytes in length.
正解：B、D
質問 # 111
What is the wire transmission speed for 100GBASE-ER4 Ethernet?
- A. 100 Mb/s
- B. 10 Gb/s
- C. 1 Gb/s
- D. 100 Gb/s
正解：D
質問 # 112
Refer to the exhibit.
Which call-out accurately shows the current running version of the Cisco UCS Manager management software?
- A. B - IO Module 1 running version 1.4(1m)
- B. A - UCS Manager running version 1.4(1m)
- C. C - Interface Card 1 running version 1.4(1m)
- D. D - Kernel running version 4.2(1)N(1.4m)
正解：B
質問 # 113
Refer to the exhibit.
Which statement correctly identifies the front panel LEDs on the Cisco UCS C220 Server?
- A. A is network link activity LED; B is system status LED; C is identification button and LED; D is power button and power status LED.
- B. A is system status LED; B is network link activity LED; C is power button and power status LED; D is identification button and LED.
- C. A is power button and power status LED; B is identification button and LED; C is system status LED; D is network link activity LED.
- D. A is network link activity LED; B is system status LED; C is power button and power status LED; D is identification button and LED.
正解：C
質問 # 114
Which two types of information does the show module NX-OS command display? (Choose two.)
- A. Module status
- B. Module IP address
- C. Module ports type
- D. Module type
- E. Module license information
正解：A、D
解説：
Explanation/Reference: https://www.cisco.com/en/US/docs/switches/datacenter/sw/4_2/nx-os/system_management/ command/reference/sm_cmd_show.html
質問 # 115
Up to what speed can Category 5 UTP cable transmit data?
- A. 100 Mb/s
- B. 1000 Mb/s
- C. 10000 Mb/s
- D. 10 Mb/s
正解：B
質問 # 116
What does the IEEE 802.3 standard define?
- A. the physical layer of wired Ethernet
- B. the application layer of wired networks
- C. the signal strength of wireless networks
- D. the physical layer of wireless networks
正解：A
質問 # 117
......
練習できる010-151問題で認証試験問題集ガイド解答は練習専門Fast2test：https://jp.fast2test.com/010-151-premium-file.html
無料Cisco 010-151テスト練習テスト問題試験問題集：https://drive.google.com/open?id=1gnJpwRihclYM-cDr7Ravxmp7A3OfPv5x