010-151トレーニング最新認定問題をゲットCCT Data Center合格目指せ2025年04月19日 [Q89-Q106]

010-151トレーニング最新認定問題をゲットCCT Data Center合格目指せ2025年04月19日

認定トレーニング010-151試験問題集テストエンジン

シスコは、ネットワーキングと通信技術の分野の大手企業です。同社は、IT業界でのキャリアに優れている専門家にさまざまな認定を提供しています。これらの認定の1つは、Cisco 010-151試験で、Cisco Datacenter Networking Devices（DCTECH）認定試験としても知られています。この試験は、Cisco Datacenterネットワーキングデバイスを扱う専門家の知識とスキルをテストするように設計されています。

Cisco 010-151認定は、データセンターのネットワーキングの専門知識を紹介し、雇用市場で自分自身を区別する素晴らしい方法です。この認定により、Cisco Data Center Networking Technologiesと協力してキャリアの見通しを改善する能力を実証できます。この試験は、65〜75の質問で構成され、90分間続くオンラインの提案されたテストです。試験に合格するには、候補者は合計マークの少なくとも70％を獲得する必要があります。試験料は通常約300ドルで、認定は3年間有効です。

シスコ010-151認定は、データセンターで働くことを望む個人や、ネットワーキングの前の経験を持つ人々にとって重要なステップです。試験に合格することは、個人がデータセンター機器のインストール、保守、サポートに必要な知識とスキルを持っていることを示します。この認定は、個人の資格を向上させ、キャリアの見通しを大幅に改善します。さらに、試験は個人の専門知識を検証し、組織にとって非常に価値がある人物になるため、必要に応じて最高の技術サポートを提供できます。

質問 # 89
Refer to the exhibit.

Where is the best place to see bootflash free space?

A. C - Local Storage Information
B. D - High Availability Details
C. A - Available Memory
D. B - Total Memory

正解：A

質問 # 90
Refer to the exhibit.

What is the name of this rack-mount server?

A. Cisco UCS C240 Rack-Mount Server
B. Cisco UCS C460 Rack-Mount Server
C. Cisco UCS C220 Rack-Mount Server
D. Cisco UCS C420 Rack-Mount Server

正解：D

質問 # 91
Refer to the exhibit.

Which option should you select to get the output of the show tech-support detail command for the Cisco UCS B-Series blade?

A. B - chassis
B. D - rack-server
C. A - ucsm
D. C - fabric-extender

正解：A

質問 # 92
After installation or replacement of a Cisco UCS C-Series Rack-Mount Server, the host does not boot.
Which four options should be verified? (Choose four.)

A. Verify that power supplies are receiving power.
B. Reseat the DIMMs, CPU, and PCI cards.
C. Check the Cisco IMC for fan faults.
D. Check the CPU sockets for bent pins.
E. Verify the power source to the equipment.
F. Reseat the mezzanine card connector.
G. Check for loose HDD cables.

正解：A、B、D、E

質問 # 93
In the Cisco UCS S3260 Storage Server which two of the below ports are available on a System I/O Controller?
(Choose two.)

A. Dedicated Management port
B. KVM Console port
C. Ethernet LOM port
D. PCIe ports
E. QSFP port

正解：D、E

解説：
Explanation
Explanation/Reference: https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-s-series- storage-servers/s3260-specsheet.pdf page 3

質問 # 94
Refer to the exhibit.

What is the name of this Cisco Nexus 3000 Series Switch?

A. Cisco Nexus 3172PQ
B. Cisco Nexus 3016
C. Cisco Nexus 3132Q
D. Cisco Nexus 3524

正解：C

質問 # 95
What is the name of the process to automatically upgrade a new Fabric Interconnect when it is connected to the functioning Fabric Interconnect?

A. Firmware Policy Process
B. Auto-Sync Process
C. Firmware Update Process
D. Auto-Negotiate Process

正解：B

解説：
The process you're referring to is called the Auto-Sync Process. When a new Fabric Interconnect is added to a Cisco UCS domain, this process automatically synchronizes its firmware version with the existing Fabric Interconnect, ensuring both are running the same version.
Here's how it works:
New Fabric Interconnect Added: A new Fabric Interconnect is physically connected to the existing Fabric Interconnect in the UCS domain.
Firmware Version Check: The new Fabric Interconnect automatically detects the firmware version running on the existing Fabric Interconnect.
Synchronization: If the firmware versions differ, the Auto-Sync process initiates a firmware upgrade or downgrade on the new Fabric Interconnect to match the version on the existing one.
Completion: Once the firmware versions are synchronized, the new Fabric Interconnect becomes fully operational within the UCS domain.
Why other options are incorrect:
Firmware Policy Process: This refers to the overall management of firmware versions and updates within the UCS domain, not the specific process of automatic synchronization between Fabric Interconnects.
Auto-Negotiate Process: This is a networking protocol used to establish communication parameters between devices, not related to firmware upgrades.
Firmware Update Process: While this is a general term for updating firmware, it doesn't specifically describe the automatic synchronization between Fabric Interconnects.
Cisco Datacenter Networking Devices Reference:
Cisco UCS Manager Firmware Management Guide: This guide provides detailed information about managing firmware in Cisco UCS environments, including the Auto-Sync process for Fabric Interconnects.
Cisco UCS Fabric Interconnect Configuration Guide: This guide offers comprehensive information about configuring and managing Cisco UCS fabric interconnects, including firmware updates and the Auto-Sync feature.
The Auto-Sync process simplifies the addition of new Fabric Interconnects to a UCS domain by automating the firmware synchronization, ensuring consistency and reducing manual intervention.

質問 # 96
Which three steps do you perform to troubleshoot when a rack server powers on with no video? (Choose three.)

A. Verify the power source to equipment.
B. Check for memory subsystem failure.
C. Check that the front I/O dongle is properly seated.
D. Check the front I/O cable connection to the motherboard.
E. Reseat the DIMMs, CPU, and PCI cards.

正解：B、C、D

質問 # 97
When the Cisco UCS Manager is used to verify the B- or C-Series device, which two types of Overall Status are acceptable and do not indicate a failure? (Choose two.)

A. Active
B. OK
C. Unassociated
D. Online

正解：B、C

質問 # 98
Which command syntax is correct to reset the admin password when the switch is in the kickstart prompt
"switch(boot) #"?

A. configure terminal -> admin-password <password>
B. exec -> admin-password <password>
C. admin-password <password>
D. connect nxos -> admin-password <password>
E. connect local-mgmt -> admin-password <password>

正解：A

質問 # 99
Refer to the exhibit.

Which option should you select to get the output of the show tech-support detail command for the Cisco UCS B-Series blade?

A. B - chassis
B. D - rack-server
C. A - ucsm
D. C - fabric-extender

正解：A

質問 # 100
Which device provides analysis of Fibre Channel traffic without any network disruption?

A. Cisco MDS 9000 Data Analyzer Adapter
B. Cisco MDS 9000 Port Analyzer Adapter
C. Cisco MDS 9000 Channel Analyzer Device
D. Cisco MDS 9000 Channel Analyzer Adapter

正解：B

質問 # 101
Refer to the exhibit.

Which statement correctly identifies the front panel LEDs on the Cisco UCS C220 Server?

A. A is system status LED; B is network link activity LED; C is power button and power status LED; D is identification button and LED.
B. A is network link activity LED; B is system status LED; C is power button and power status LED; D is identification button and LED.
C. A is power button and power status LED; B is identification button and LED; C is system status LED; D is network link activity LED.
D. A is network link activity LED; B is system status LED; C is identification button and LED; D is power button and power status LED.

正解：C

質問 # 102
How many 10GBASE-T port licenses are preinstalled on a Cisco Nexus 3064-32T?

A. 0
B. 1
C. 2
D. 3

正解：C

質問 # 103
Refer to the exhibit.

This image shows a CPU Pick-and-Place tool and a CPU Socket Protective Cap Removal tool. Which types of Cisco UCS servers and Intel Xeon processors do these tools support?

A. Cisco UCS B200 M3 Blade Server, B420 M3 Blade Server, C220 Rack Server, C240 Rack Sever, and C420 Rack Sever with Intel Xeon E5-2400 Series processors
B. Cisco UCS B22 Blade Server, C22 Rack Server, and C24 Rack Sever with Intel Xeon E5-2400 Series processors
C. Cisco UCS B22 Blade Server, C22 Rack Server, and C24 Rack Sever with Intel Xeon E5-2600 Series processors
D. Cisco UCS B200 M3 Blade Server, B420 M3 Blade Server, C220 Rack Server, C240 Rack Sever, and C420 Rack Sever with Intel Xeon E5-2600 Series processors

正解：D

質問 # 104
Which two statements about PCIe are true? (Choose two.)

A. The PCIe 4.0 standard doubles the transfer rate compared to PCIe 5.0.
B. The PCIe standard is a bus-based system in which all the devices share the same bidirectional, 32-bit or 64-bit, parallel signal path.
C. The PCle supports native hot-swap functionality.
D. A link that is composed of four lanes is called an x4 link.
E. You can install a PCI Express x16 adapter into an x4 slot.

正解：A、D

質問 # 105
Drag the password recovery procedures on a Cisco NX-OS switch from the left to the right and place them in order.